-
PLEASE CALL FOR PRICING.Our USB Type B Port Locks protect Type B port connectors, officially referred to as Standard-B connectors, are square in shape with either a slight rounding or large square protrusion on the top, depending on the USB version. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-BLD10
-
PLEASE CALL FOR PRICING.The Smart Keeper CompactFlash Port Lock inserts easily, and, once in-place, it prevents intrusions by anyone except an authorized associate equipped with a Smart Keeper Port Lock Key. Matched to your existing Smart Keeper key pattern, you can control access affirmatively, using the same levels of authorization you establish for USB port and connector access. Key NOT included Part No. CSK-CFD10
-
PLEASE CALL FOR PRICING.The Smart Keeper Laptop Lock and Tether Cable is a wise measure for securing your laptop. With the Smart Keeper Laptop Lock and Tether Cable in place, your laptop can't walk off. It's a hazard that often goes unrecognized, especially in the workplace.
Key and Type C Lock NOT included
Part No. CSK-CLL10 -
PLEASE CALL FOR PRICING.The Smart Keeper USB Port Lock for Type C data ports and connections is the quickest and easiest USB port lock to install, physically blocking access to any unused USB port in your system. Key NOT included Requires one a Smart Keeper Port Lock Key Professional for removal.Part No. CSK-CUL10
-
PLEASE CALL FOR PRICING.The Smart Keeper DVI Port Lock is a modest, inexpensive, two-piece device that prevents unauthorized entry or access to any unused DVI, DB15, or HD15 ports on your computer or device. It is simple to install and serves as a very effective deterrent toward unauthorized use. Key NOT included Part No. CSK-DL10
-
PLEASE CALL FOR PRICING.The Smart Keeper eSATA Port Lock is a port block designed to protect your unused eSATA ports. They can be matched to your existing Smart Keeper key pattern so compatibility with your own system of access control is made easy. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-ETD10
-
PLEASE CALL FOR PRICING.The Smart Keeper HDMI Port Lock, teamed with a least one Smart Keeper Port Lock Key Professional, enables you to secure your open HDMI ports and provide access only through authorized personnel. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-HMD10
-
PLEASE CALL FOR PRICING.With the Smart Keeper Link Lock, the device you attach to a USB port stays there. Only your authorized personnel, equipped with a matched Smart Keeper Port Lock Key Professional, can detach the device and introduce another component to the port. Key NOT included Requires at least one Smart Keeper Port Lock Key Professional for removal. Link Lock Hubs sold separately.Part No. CSK-LK11
-
PLEASE CALL FOR PRICING.The Smart Keeper Laptop Lock and Tether Cable locks your laptop into place, tethering it to any fixture. 70-inch anti-theft cable included. This is only compatible with the combination lock included. The combination lock can be reset to any pattern that the user desires and plugs in via USB port. This key-based lock is sure to keep your laptop protected is any public place. Part No. CSK-LLD01
-
PLEASE CALL FOR PRICING.Securing your open network ports with the Smart Keeper Network Port Lock Plus is a necessary condition for completing the physical sector of your cybersecurity perimeter. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal.Part No. CSK-NL11
-
PLEASE CALL FOR PRICING.The Smart Keeper Network Module Lock requires at least two Smart Keeper USB Port Lock Professionals and at least one Smart Keeper Port Lock Key Professional to deploy full security. Key NOT includedPart No. CSK-NM10
-
PLEASE CALL FOR PRICING.Thanks to the Smart Keeper Link On, a non-removable USB flash drive, you can be assured that, once the drive is inserted, no one but your authorized representative is able to take those files away, substitute unwanted ones, or insert yet another device that might be a carrier of disruption and disorder. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal.Part No. CSK-OM10
-
PLEASE CALL FOR PRICING.Once installed, the two anchoring teeth of the Smart Keeper USB Closing Lock are in fixed position, and the device simply cannot be removed without destroying the port, thoroughly defeating the purpose of any attempt at an invasive, unauthorized access to the USB port. Part No. CSK-PC01
-
PLEASE CALL FOR PRICING.Your cybersecurity perimeter is not fully guarded unless you add the DB25 Serial Port Lock to your program, because without it, anybody with opposing thumbs can get into your system. Hackers know how to determine which of the 25 pins is No. 1, and a connection can be devised using solder and wrap wire that can hack into a cable TV network: or a vital data communication system. Key NOT includedPart No. CSK-PL10
-
PLEASE CALL FOR PRICING.The Smart Keeper Secure Connector gives you an extra layer of security by allowing only cleared devices from qualified personnel to be inserted in your USB ports. Connected alone, it acts as a data stripper that allows you to charge your device without exposure or sharing potentially malicious files. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal.Part No. CSK-SC10
-
PLEASE CALL FOR PRICING.The Smart Keeper SD Port Lock is part of the complete and thorough line of cybersecurity devices you can put to work immediately from. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-SDD10
-
PLEASE CALL FOR PRICING.The Smart Keeper Port Lock Key Professional is a single-key solution: one key controls multiple locking solutions.
- USB Type A.
- USB Type B.
- USB Type C.
- Link Lock.
- Link Lock Hub.
- Network Port Lock Plus.
- Network Module Lock.
- LAN Cable Lock Plus.
- Fiber Optic Module Lock Plus.
- DB9 Serial Port Lock.
- DB25 Serial Port Lock.
- DVI Port Lock.
- SD Port Lock.
- HDMI Port Lock.
- eSATA Port Lock.
- Link On.
- Secure Connector.
- Optical Disk Drive Lock.
- CompactFlash Port Lock.
-
PLEASE CALL FOR PRICING.The Smart Keeper USB Port Lock Professional is the easiest and best way to protect your desktop and laptop devices, as well as your network. The Smart Keeper USB Port Lock Professional provides enhanced security by having its own trackable serial number and can be used with multiple locking solutions within the suite of Smart Keeper products. It is the best USB port blocker on the market. USB port lock key NOT included The Smart Keeper USB Port Lock Professional requires one Smart Keeper Port Lock Key Professional for removal.Part No. CSK-UL10
-
PLEASE CALL FOR PRICING.Your individual network cables cannot be removed without a key, by an associate with specifically authorized access, when the Smart Keeper LAN Cable Lock Plus is in place. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal.Part No. CSK-NC11
-
PLEASE CALL FOR PRICING.The Smart Keeper QSFP Port Lock blocks open QSFP (Quad Small Form-factor Pluggable) fiber optic ports that are commonly used in network switches. Removal can be done with a pattern matched key. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal.
- Prevent unauthorized QSFP port usage
- Physical lock - no data interaction with the network appliance
-
PLEASE CALL FOR PRICING.A single Smart Keeper Lock Key Mini Professional can be used to unlock various kinds of Smart Keeper Professional products.
- Easy to Use: Detailed product user guide.
- Built-in Quality: Durable body with built-in cover to protect the Key Header.
- Most complete physical solution on the market.
- Used in combination with the following locks:
-
PLEASE CALL FOR PRICING.The Smart Keeper Micro USB-B Port Lock Professional is a physical cybersecurity device that prevents unauthorized device access by physically blocking unused Micro USB-B ports. Key NOT included Requires one Smart Keeper Lock Key Mini Professional for removal.
- Easy to Use: It can be installed by hand.
- All-Purpose Key: A common key can be used to unlock various products within the Professional series.
-
PLEASE CALL FOR PRICING.The Smart Keeper Mini USB-B Port Lock Professional is a physical cybersecurity device that prevents unauthorized device access by physically blocking unused Mini USB-B ports. Key NOT included Requires one Smart Keeper Lock Key Mini Professional for removal.
- Easy to Use: It can be installed by hand.
- All-Purpose Key: A common key can be used to unlock various products within the Professional series.
-
PLEASE CALL FOR PRICING.The Smart Keeper USB-C Port Lock Professional is a physical cybersecurity device that prevents unauthorized device access by physically blocking unused USB-C ports. Key NOT included Requires one Smart Keeper Lock Key Mini Professional for removal.
- Easy to Use: It can be installed by hand.
- All-Purpose Key: A common key can be used to unlock various products within the Professional series.
-
PLEASE CALL FOR PRICING.The Smart Keeper RJ11 Port Lock Professional is a physical cybersecurity device that prevents unauthorized device access by physically blocking open RJ11 ports. Key NOT included Requires one Smart Keeper Lock Key Mini Professional for removal.
- Easy to Use: It can be installed by hand.
- All-Purpose Key: A common key can be used to unlock various products within the Professional series.
-
PLEASE CALL FOR PRICING.The Smart Keeper Mini DisplayPort Lock Professional is a physical cybersecurity device that prevents unauthorized connection to unused Mini Display Ports. Key NOT included Requires one Smart Keeper Lock Key Mini Professional for removal.
- Easy to Use: It can be installed by hand.
- All-Purpose Key: A common key can be used to unlock various products within the Essential Series.
-
PLEASE CALL FOR PRICING.The Smart Keeper Display Port Lock secures an open Display Port to prevent unauthorized use. A patterned matched key must be used for removal. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-DLD10
-
PLEASE CALL FOR PRICING.The Smart Keeper SFP Fiber Optic Module Lock Plus is the newer model of Smart Keeper SFP Fiber Optic Module Lock. The Fiber Optic Module Lock Plus provides a higher level of security with an improved locking system to effectively protect your ports. The Smart Keeper SFP Fiber Optic Module Lock Plus is easy to install, and its efficient, pared-down profile permits any number of locks to be applied when your system included multiple rows of connections. The lock effectively blanks-out the open port or ports and can be used selectively or en masse. Key NOT included Requires one Smart Keeper Port Lock Key Professional for removal. Part No. CSK-FO11
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-03100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-04100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12100.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a black UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12200.5
-
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-16100.5
-
Our shielded 1/4-inch stereo male plug will allow a secure, reliable connection to a 3.5 mm headphone-style stereo female jack. This adapter has been manufactured with brass nickel-plated connections on both the 1/4-inch male and the 3.5 mm stereo female end to ensure a long-lasting link that will provide premium sound quality for years to come. From end to end, this adapter measures 52.60 mm and weighs 0.02 lbs. The female end of this product is encased in black PVC molding to add extra protection. Our adapter has a lifetime warranty and we provide knowledgeable live online support.Part No. 30S1-14200
-
Keystone Insert, Beige/Ivory, Blank. The next time you need a keystone insert for your phone lines, you can count on CableWholesale to offer great products that get the job done. Our Blank Beige/Ivory Keystone inset is compatible with any of the keystone wall plates we have available, making it extremely versatile. We offer a lifetime warranty on this keystone insert, and we also have additional colors available. Browse our website to learn more about our keystone products, and place your order for this keystone insert today. For more details, please give us a call now to speak with a member of the CableWholesale team!Part No. 321-120IV
-
Blank Keystone Insert, White. If you have been searching for the right keystone insert for your network setup, you can take full advantage of our affordable selection. At CableWholesale, we strive to offer the reliable products our customers deserve, including this Blank White Keystone Insert. One of the best features of this insert is its full compatibility with all of the keystone wall plates we have available. You can insert it in any spare hole throughout your wall plates, allowing you to use your preferred keystone jack with it. Order yours today and make sure you give us a call if you would like to learn more from the CableWholesale team!Part No. 321-120WH
-
Telephone Cord (Data), RJ11, 6P / 4C, Silver Satin, Straight, 2 foot. This 2 foot flat silver satin telephone cable is designed for data use, straight / 1 to 1 pin out. It is ideal for use in phone patch panels and connecting modems/fax machines where a longer cord is a hassle. These telephone cords feature 6 position 4 conductor RJ11 connectors and four 28 AWG (American Wire Gauge) wires in each cord.Part No. 8101-64102
-
Telephone Cord (Voice), RJ11, 6P / 4C, Silver Satin, Reverse, 1 foot. This 1 foot Silver Satin RJ11 Telephone cable is used to connect your phone to your wall. It is the flat variety and has 6 pins on the RJ11 plugs and features 4 conductors. The cable is reversed for voice applications.Part No. 8101-64201
-
Telephone Cord (Voice), RJ11, 6P / 4C, Silver Satin, Reverse, 2 foot. This 2 foot Silver Satin RJ11 Telephone cable is used to connect your phone to your wall. It is the flat variety and has 6 pins on the RJ11 plugs and features 4 conductors. The cable is reversed for voice applications.Part No. 8101-64202
-
-
- Full CAT5e specification with moulded boots
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
-
- 10 year warranty
Part No. 44091 -
-
Our 1 foot 3.5mm mini stereo cables will connect to 3.5-mm jacks from portable CD players, PC sound card, multimedia speakers, MP3 players, iPod, iPad or any audio device using 3.5-mm jacks. You can also connect mp3 players and more to the 3.5mm input available in many new vehicles. These cables feature a spiral shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-01101
-
Our 3 foot 3.5mm mini stereo cables will connect to 3.5-mm jacks from portable CD players, PC sound card, multimedia speakers, MP3 players, iPod, iPad or any audio device using 3.5-mm jacks. You can also connect mp3 players and more to the 3.5mm input available in many new vehicles. These cables feature a spiral shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-01103
-
Our 6 foot 3.5mm mini stereo cables will connect to 3.5-mm jacks from portable CD players, PC sound card, multimedia speakers, MP3 players, iPod, iPad or any audio device using 3.5-mm jacks. You can also connect mp3 players and more to the 3.5mm input available in many new vehicles. These cables feature a spiral shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-01106
-
Our 6 foot 3.5mm mini stereo extension cable will provide needed extra reach for connecting headphones to 3.5mm jacks on devices like portable CD players, PC sound cards, multimedia speakers, MP3 players, iPod, iPad or any other audio device using 3.5mm jacks. You can also connect mp3 players and more to the 3.5mm input available in many new vehicles. 3.5mm extension cables can be used to lengthen existing 3.5mm cable, including the 3.5mm cables built into headphones and more. These cables feature a braided shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-01206
-
This handy 6 foot mono RCA to 3.5 mm cable is perfect for unique audio applications where you need both RCA and 3.5 mm connectors such as running a small audio device into a mixer. This cable features a spiral shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-07106
-
Our standard 6 foot RCA extension cable is an economical way to extend your existing RCA cables used for audio and video devices, such as stereo equipment, DVD players, and TVs. This solidly constructed Male to Female RCA extension cable features Copper wiring and fully molded Nickel plated connectors.Part No. 10R1-01206
-
Connect your RCA male plug to an RCA female port easily and securely with our RCA audio/video extension cable. This standard, 12-foot RCA extension cable is a great way to extend your existing RCA cables for DVD players, televisions and stereo equipment. This extension cable features quality nickel-plated shells to ensure a superior, long lasting connection and premium performance. Enjoy excellent 24 AWG conductivity for a crisp, clean sound. The outer, black jacket is made of heavy-duty PVC and adds extra flexibility and protection to the internal conductors from external wear and tear or environmental stressors.Part No. 10R1-01212
-
This 1 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02101E
-
This 1ft black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02101EBK
-
This is a black 3 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02103BK
-
This is a 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02201
-
This is a black 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02201BK
-
This is a 3 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02203
-
This is a black 3 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02203BK
-
Our Black 6 inch Micro USB Cable is perfect for the purse or the pocket and goes well with portable battery-based chargers. It meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03100.5BK
-
Our Black 1.5 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03101.5BK
-
This 1 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.Part No. 10W1-13201
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02101
-
Cat 5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. They can also be used for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat 5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. All of our Cat 5e Ethernet patch cables exceed the EIA/TIA568B standard.Part No. 10X6-02101.5
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02103
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA568B standard.Part No. 10X6-02201.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02202
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02203
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-03101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA568B standard.Part No. 10X6-03101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-03102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-03103
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-04101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA568B standard.Part No. 10X6-04101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-04102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-04103
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05103
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06103
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07103
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08102
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09101
-
Cat5e Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09101.5
-
Cat5e Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09102
-
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09103
-
Cat5e Ethernet cables of the 4 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09104
-
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12101