Part No. 31D3-22400
-
This adapter will convert a serial DB25 female cable end into a male or allow you to connect two cables together. -
This adapter will change the gender of a male DB9 cable or connect two male DB9 cables together. If you have a cable with a DB9 male connector, this adapter would change that into a DB9 female while maintaining whatever pin-out was on your original cable.Part No. 31D1-07400 -
This adapter can be used as a port saver or as a small extension. This adapter will not change the gender of any cable. It is intended as a port saver on your computer or device so that the actual port does not receive wear and tear. This adapter would also add a slight extension if you needed your DB9 port to extend further.Part No. 31D1-07200 -
This adapter will convert a DB25 modem cable to a DB9 modem cable and vice versa. This adapter is male to female.Part No. 30D1-05200 -
Serial / AT Modem Adapter, DB9 Female to DB25 Female -
Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 10 foot -
Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 3 foot
-
Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 4 foot
-
C19 to NEMA 5-15P Power Cord, Black, SJT, 14 AWG - 15 AMP, 3 Conductor, 3 foot -
C19 to NEMA 5-15P Power Cord, Black, SJT, 14 AWG, 3 Conductor, 15 footPart No. 10W2-42215 -
Specs- 6 foot length
- C19 to NEMA 5-15P
- 14 awg
- 3 conductors
- Rated to 300 volts
- SJT - Service Junior Thermoplastic
- Black
- Servers, network/medical/professional food equipment, appliances, or any device with a C20 power port./li>
Part No. 10W2-42206 -
SFP 1 Gigabit Ethernet 1310nm Singlemode, 10 km range, MSA Standard Compatible. -
SFP 1 Gigabit Ethernet 850nm Multimode, 550 m range, MSA Standard Compatible. -
Gigabit Ethernet LC Transceiver, 1000Base-SX- LC Duplex connection, for fiber-glass/glass fiber connections up to 500m with Multimode 62.5/125µm or 50/125µm fibers
- Compatible with IEEE-802.3z Gigabit Ethernet and ANSI specifications for Fiber Channel applications
- Compatible with all Gigabit Ethernet Switches with Mini-GBIC/SFP slots, e.g. tested with LINDY Switch 25012 und 25004 , D-Link, Extreme Networks, Coretek, Finisar, Sanway, Copleynetworks, Allnet, Foxcon, Modultek, ….
Part No. 25015 -
Rackmount 24 Port Shielded Cat6A Patch Panel, Horizontal, 110 Type, 568A and 568B Compatible, 1U. If you are looking to centralize your Cat6a shielded network then you will need a patch panel in your server room / communications closet. Regardless of whether this is in your home or business this patch panel provides a 10 Gigabit compatible backbone for years of high-speed connectivity and reliability. Simplify and streamline your data/voice wiring for the future. Features- 1U Spacing, traditional 19-inch rack design
- High strength frame for rigidity and durability. Eliminates flexing and warping
- Cable management bracket, helps support/eliminate cable disconnects (integrated)
- Removable shielded dust cover
- Locking screw terminals for cable support and security, eliminates disconnects
- Meets ANSI/EIA/TIA 568C.2 Standard
- Color coded label for easy wiring T568A & B
- 110/Krone punchdown compatible
- Solid or stranded 22 thru 26 AWG wire
- Ideal for voice, data, video and audio applications
- Gold plated RJ45 port contacts
Part No. 675-24C6AS -
Shielded Cat6 Keystone Jack, RJ45 Female to 110 Punch Down. Our Cat6 keystone inserts are used to terminate network cable runs. They offer a clean transition from a 110 type punch down to a Cat6 jack for easy deployment in any environment. From the server room/closet to any room in your home or office where network connectivity is desired these keystones are a great option. These Cat6 keystones work with any of our keystone wall plates, surface mount boxes and keystone patch panels and offer you a highly adaptable modular design. This particular keystone is good for a shielded cable. Pure copper conductors provide the best signal possible. The RJ45 jack features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 keystones exceed the EIA/TIA-568-C standardPart No. 326-520 -
Shielded, Cat5e Aerial w/Messenger, 24 AWG ,Solid Copper Ethernet Cable, F/UTP, POE Compliant, Spool, Black, 1000 foot -
Shielded Cat5e Black Copper Ethernet Cable, Snagless/Molded Boot, POE Compliant, 25 foot -
Shielded Cat5e Blue Copper Ethernet Cable, Snagless/Molded Boot, POE Compliant, 50 foot -
Shielded Cat5e Blue Solid Copper Ethernet Cable, F/UTP, POE & TAA Compliant, Pullbox, 1000 foot -
Bulk Shielded Cat5e Red Ethernet Cable, F/UTP (Foil/Unshielded Twisted Pair), Solid, Pullbox, 1000 foot -
Shielded Cat5e Gray Solid Copper Ethernet Cable, F/UTP, POE & TAA Compliant, Pullbox, 1000 foot -
This shielded coupler is designed to join 2 Ethernet cables together with minimal signal loss. This coupler comes in silver.Part No. 301-C50S -
The next time you want to outfit one of your rooms with a Cat5e connection, you can count on CableWholesale to offer all of the products you need. With our Shielded Cat5e Keystone Jack, you will be able to complete the network setup process in your office, home, or any other type of environment. One of the best features of this RJ45 female to 110 punch down jack is that it's compatible with several of the other keystone products we offer. From our patch panels to wall plates, using this Cat5e keystone will help you take full advantage of your network. You can contact the CableWholesale team today if you would like additional information!Part No. 310-520 -
These crimp connectors are used to terminate a CAT-5 or CAT-5E cable. The connectors are shielded and come in a bag of 50 pieces.Part No. 31D0-51007 -
Shielded Cat6 Coupler, RJ45 Female -
Shielded Cat6 Gray Ethernet Patch Cable, Snagless/Molded Boot, 14 footPart No. 10X8-52114 -
Shielded Cat6a Coupler, RJ45 FemalePart No. 33X6-52400 -
Shielded Cat6a Keystone, In-Line Coupler, RJ45 FemalePart No. 33X6-50000 -
Shielded Cat6a Keystone Jack, RJ45 Female to 110 Punch Down. This shielded Cat6a RJ45 keystone jack insert works with an RJ45 female to a 110 punch down. Works perfectly with OEM cables.Part No. 33X6-520 -
Platinum Tools Shielded External Ground Cat6a RJ45 Crimp Connectors for Solid/Stranded Cable w/Liner and Spacer Bar. 28-26AWG, 10pc Clamshell -
Shielded Cat6a Keystone Jack, Toolless, RJ45 Female -
Shielded Cat8 Keystone Jack, 40Gbps, Toolless, RJ45 Female -
Shielded Direct Burial Multi-Purpose Wire, Black, 18/6 (18AWG 6 Conductor), Stranded, CMX / Outdoor rated, Spool, 1000 foot -
Shielded Plenum Security Cable, White, 22/6 (22 AWG 6 Conductor), Stranded, CMP, Spool, 1000 foot -
Shielded Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot -
Silicone Desktop Cable Organizer w/ Adhesive backing, 3 Slot, Gray -
Silicone Desktop Cable Organizer w/ Adhesive backing, 6 Slot, Gray -
Pass Through Cat5e/6 UTP RJ45 Starter Kit, 1ea (S45-1501, S45-1601, S45-C101, S45-801, S45-S01YL) -
Pass Through Cat5e/6 UTP RJ45 Starter Kit, 1ea (S45-1600, S45-C100, S45-801, S45-S01YL, S45-B002) -
This single gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the corresponding pattern for the correct raceway size. Screw the top of the box to the mounting plate with the included screws. With knockouts in both the vertical and horizontal positions, this surface mount box continues the raceway system's fully customizable feature. A sharp blade will make quick work of cutting out the appropriately sized notch for the raceway you are using.Part No. 31R5-100IV -
Wall Plate Mounting Bracket, Low Voltage, Single Gang -
This device will filter any noise from a phone/DSL line. Without a filter like this, your DSL or phone connection can be affected by interference and may not even work.Part No. 300-10200 -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
This white single gang surface mount box is designed for use with keystone wall plates, Decora-style wall plates, pass-through wall plates for low voltage cables, and more. This surface mountable junction box is a perfect solution when one can not or does not want to install flush mount boxes. Our product includes threaded brass inserts for the faceplate, mounting screws to secure the box to a wall or surface, and a double-sided adhesive pad if drilling holes is not an option. The back of the box features knockout patterns for feeding cables into the surface mount box.Part No. 300-626WH -
Singlemode + Multimode Universal ULTRAsplice -
This is a 10-foot standard power extension cable. This power cable features the NEMA 5/15P (standard three-prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long-lasting but flexible enough to wrap in tight spaces. The 18AWG pure copper conductor transfers maximum power. This UL and CSA listed cable operates on 125 volts and 10 Amps power. Operating temperature is 75C/167F.Part No. 10W1-03210 -
This is a 15-foot standard power extension cable. This power cable features the NEMA 5/15P (standard three-prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long-lasting but flexible enough to wrap in tight spaces. The 18AWG pure copper conductor transfers maximum power. This UL and CSA listed cable operates on 125 volts and 10 Amps power. Operating temperature is 75C/167F.Part No. 10W1-03215
