- 10 pack
- Crimp Type
Part No. 62201
-
-
5 packPart No. 62051 -
- 10 pack
Part No. 62050 -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
" -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Accommodates 6 face plate modules
- Supplied with 4 x blank face plate modules
- Flip up cover with identification label
- Suitable for surface mounting
- Multiple cable entries
- Dimensions: 170 x 205 x 55mm (WxDxH)
- Color: White
- Warranty: 2 years
Note: picture shown for illustration only, the shown modules are not included.Part No. 60549 -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation" -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388 -
- RJ-45 Female to RJ-45 Female
- Meets Cat5e requirements
- Unshielded
- Warranty: 2 years
-
- This CAT5e In-Line Termination Block allows you to easily join solid core cables and still maintain performance. Save time and money when moving, adding to or repairing your wiring system.
- IDC punchdown termination block
- Joins solid core FTP cable
- Suitable for extending and repairing structured cabling systems
- Compact shielded construction
Part No. 60173 -
Technical Specifications:- Standard: IEEE 802.11g/b
- Bus Type: USB 2.0, backwards compatible with USB 1.1
- Connector: USB Type A Male
- Frequency Band: 2.4000 - 2.4835GHz (ISM-Band)
- Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) BPSK, QPSK, CCK (11b)
- Radio Technology: Direct Sequence Spread Spectrum (DSSS), Frequency Hopping Spread Spectrum (FHSS)
- Data Rate: 54,48,36,24,18,12,11, 9, 6, 5.5 ,2 ,1 Mbps (Auto fallback)
- Security:
- 64/128/152 Bit WEP
- WPA (TKIP with IEEE802.1x) and AES
- LEDs: Link, Activity
- Sensitivity:
- -72dBm @ 54Mbps
- -85dBm @ 11Mbps
- -93dBm @ 1Mbps
- Transmit Power: 16dBm
- Power Consumption: TX: 340mA, RX: 150mA
- Compatible with Windows 98SE/ME/2000/XP
- Dimensions: 270 x 870 x 90mm (WxDxH)
- Antenna: Internal integrated antenna
Part No. 52031 -
- Bus Type: ExpressCard/34
- Speed: Up to 480Mbps
- Connectors: 2 x Type A USB Female
- Ideal for connecting extra USB peripherals such as printers, scanners, drive housings etc., to your notebook
- Built-in power jack for optional adapter for use when the connected device require power from the USB port
- For use with computers which feature ExpressCard expansion slots
- Compatible with Windows 2000/XP/Vista/Windows 7/Server 2003, 2008 and Mac OS 8.6
- 2 Year warranty
Part No. 51505 -
ExpressCard card, 1 Port. Use CardBus/PCMCIA cards in the ExpressCard slot. This ExpressCard/34 adapter allows you to connect 32Bit CardBus cards (USB 2.0, FireWire, GigaLan, eSATA, Wireless .) to a notebook with ExpressCard/34 or ExpressCard/54 slot. Note: The ExpressCard/34 adapter must be inserted together with the CardBus card when booting up the computer! No hot-pluggable supportPart No. 51355 -
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MBps
- I/O Address: LPT 1-6
- IRQ Selection: Plug & Play
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Server 2003, 2008/Vista/7, Linux
- 2 year warranty
Part No. 51305 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 8/16 Bit ISA
-
- Speed: Up to 921Kbit/sec
-
- I/O Address: COM 1-12
-
- IRQ Selection: 3,4,5,7,9,10,11,12,15
-
- IRQ Sharing: Yes
-
- Card Connector: 37 Way D Female
-
- Adaptor Cable: 4 x 25 Way D Male
-
- Software Compatibility: DOS, Windows 3.1x/95/98/ME/NT/2000/XP, Linux
Part No. 51301 -
-
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port) or EPP (Enhanced Parallel Port)
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
- 3 Year Warranty
Part No. 51286 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: "Plug & Play"
-
- Card Connector: 25 Way D Female
-
- Parallel port can be configured as SPP, BPP, ECP or EPP
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51285 -
-
<ul ">This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: 32 Bit PCI
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista, Linux
- 3 Year Warranty
- Speed: Up to 921Kbps
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 9 Way D Male
- Separate Back Plate: 9 Way D Male
- Speed: Up to 2.7MBps
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
Part No. 51281 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
Serial Port:-
- Speed: Up to 921Kbit/sec
-
- I/O Address: COM 1-8
-
- IRQ Selection: 3, 4, 5, 7, 9
-
- Card Connector: 2 x 9 Way D Male
Parallel Port:-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: 3, 4, 5, 7, 9
-
- Separate Back Plate: 25 Way D Female
-
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
Part No. 51280 -
-
- Bus Type: 32 Bit PCI
- Speed: Up to 921Kbit/sec
- FIFO: 128 byte
- I/O Address: Com 1-8
- Card Connector: 62 Way D Female
- Adapter cable: 1 x 62 Way male to 8 x 9Pin D Male (Octopus cable)
- 3.3V and 5V support
- Chipset: Oxford OXuPCI958
- Software Compatibility: Windows 98/NT/2000/XP/Vista/Windows 7, DOS, Linux
- 3 Year warranty
Part No. 51275 -
- Bus Type: 32 Bit PCI
- Speed: Up to 920Kbit/sec
- I/O Address: "Plug & Play"
- Supports 3.3V and 5V motherboards
- DC 5V output for DB9 selected by jumper
- Standard and Low Profile back plates included
- IRQ Selection: "Plug & Play"
- External Connector: 1 x 44 Way D Female
- Adapter Cable: 44 Way D Male to 4 x 9 Way D Male
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista/Windows 7/8/Server 2003, 2008
- Chipset: Oxford semiconductor
- 2 Year Warranty
Part No. 51274 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Vista, Linux
Part No. 51265 -
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: 32 Bit PCI
- Speed: Up to 921Kbit/sec
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 44 Way D Female
- Adapter Cable: 44 Way D Male to 2 x 9 Way D Male
- Software Compatability: DOS, Windows 3.1x/95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51261 -
- Low profile PCIe
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP compatible
- IEEE 1284 standard
- Supports PCIe Base Specification Rev 1.1
- Supports x1, x2, x8, x16 (lane) PCIe Bus connector keys
- Card Connector: 25 Way D Female
- Software Compatibility: Windows 2000/ME/XP/Vista/Windows 7/Server 2003, 2008, Linux Kernel 2.6.x
- Chipset: Oxford OXPCIe840
- 2 Year warranty
Part No. 51246 -
- Bus Type: 32 Bit PCI
- Speed: 10/100/1000Mbps
- Standard: IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow control support) & 802.1q (Virtual LAN)
- BootROM Socket
- Plug & Play
- Card Connector: RJ-45 UTP (10/100/1000Base-T)
- Chipset: Realtek
- LED indicators: Link/Activity
- Gigabit connection over CAT5e or higher STP/UTP cable
- Software Compatibility: Windows 98SE/ME/NT/2000/XP/Server 2003/Vista/7, Netware 5.x, Netware ODI for DOS, Linux, Unix, Mac OS 10.2 & higher
Part No. 51220 -
- 2 x RS422/485 Ports
- Bus Type: 32 Bit PCI Compliant
- Compliant with PCI revision 2.2 (3.3V & 5V)
- Speed: Up to 921Kbit/sec
- 256Kbyte FIFO buffer
- Plug & Play
- Automatic I/O and IRQ set-up
- ESD protection 15KV support
- Card Connector: 1 x DB25 Male to 2 x DB9 Male (via an adapter cable)
- Software Compatibility: Windows 2000/NT/XP/Vista/Windows 7/Server 2003, 2008, Linux, SCO Unix
- Supplied with standard and low profile back plates
- 2 Year warranty
Part No. 51215 -
- Speed: Up to 921Kbit/sec
- Card Connector: 4 x 9 Way D Male (via breakout cable)
- Supports PCI Express Specification Revision 1.1
- Built-in 128K byte DMA software FIFO
- Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- 2 Year Warranty
Part No. 51189 -
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- Supports PCI Express Specification Revision 1.1
Serial Port:- Speed: Up to 921Kbps
- Card Connector: 2 x 9 Way D Male
Parallel Port:- Speed: Up to 15Mbps
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port) or SPP (Standard Parallel Port)
Part No. 51188 -
- Supports Type: 32/64 Bit Systems
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP
- Card Connector: 25 Way D Female
- Software Compatability: 2000/XP/Server 2003/Vista (32/64 Bit)/7 (32/64 Bit), Linux
Part No. 51185 -
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: PCIe (2.5Gbit/sec)
- Speed: ATA-133
- Internal Connector: 40 Way EIDE Male
- 40 Way IDE Ribbon Cable included (supports two drives)
- Standard and Low Profile PC Back Plates included
- Supports RAID levels 0, 1 and JBOD
- Pin header for drive LED connection
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008
- 2 Year warranty
Part No. 51177 -
- Bus Type: PCIe (2.5Gbit/sec)
- Speed: SATA II (3Gbit/sec)
- Internal Connector: 1 x SATA Female
- External Connector: 1 x eSATA Female
- Port Multiplier and Native Command Queuing support
- Supports RAID levels 0, 1, 0+1, 5 and JBOD
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
Part No. 51171 -
- Bus Type: 32 Bit PCI
- Speed: Serial ATA-150
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Internal Connector: 2 x SATA Female
- Supports 2 independent Serial ATA channels
- Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
- Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
- Integrated PCI DMA engines
- RAID Function Level 0 and 1 (Mirror and Stripe Set)
- Standard and Low Profile PC Back Plates included
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51150 -
- Bus Type: PCI Express (x1)
- Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
- Compliant with USB 3.0 Rev. 1.0 specification
- Compliant with PCIe 2.0 Specification
- Each USB port supplies +5VDC/900mA
- Supports USB 3.0, USB 2.0, and USB 1.1 devices
- Connectors: USB 3.0 Type A Female (3 x External, 1 x Internal) & 15 Way SATA Power
- Chipset: TI
- All ports are silicon fused
- Software Compatibility: Windows 7 (32/64bit), Vista, XP, Linux 2.6.32
- Includes standard and low profile brackets
- 2 Year warranty
Part No. 51121 -
- PCI CardBus adapter card
Slot: 1 x CardbusSupports hot swappingPlug & PlayChipset: RICOHAccess 32-bit CardBus cards (3.3 V and 5V)Automatic detection of 32-bit CardBus cardsPCI Local Bus Specification 2.2PC Card Standard Release 8.0Operating Systems: Win98/ME/2000/XP/VistaHardware requirements: free PCI slotPart No. 51105 -
- Bus Type: 32 Bit PCI
- Speed: Up to 480Mbps
- Chipset: Via VT 6212L
- Silicon fuses provide protection for each port
- USB 2.0 and USB 1.1 compliant
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
- Software Compatibility: Windows ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51063 -
Adds 4 x USB 3.0 ports to your PC using the PCIe slot.- Connections: 4 x Type A socket, external
- PCIe Gen2 x1 card
- Each port is separately protected against short circuits and excessive current consumption with a semiconductor fuse
- Renesas / NEC chipset uPD720201
- Bus: PCIe
- Supports USB 3.0, USB 2,0 and USB 1.1
- Supports USB 3.0 specifications
- Data transfer: SuperSpeed (5Gbps), HighSpeed (480Mbps), FullSpeed (12Mbps) and LowSpeed (1.5 Mbps)
- Compatible with PCI Express specification 2.0
- 15-pin SATA- or 4pin Molex current connection (5V from ATX power supply)
- Suitable for standard slot and low profile. Low Profile slotted panel included in delivery.
- Operating systems (32bit/64bit): Win XP/Vista/7 / 64bit 2008 R2 / 8
Part No. 51051 -
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
These cables feature a crossover connection allowing two devices of the same type (PC’s, network switches) to connect to each other. Intentionally crossed wiring in the cable connects the transmission signals at one end of the cable to the receiving end.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
" -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 47034 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 47002 -
- LSOH cable
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: Grey
- 10 year warranty
Part No. 46921 -
- LSOH cable
- Full CAT6 specification with molded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: White
- 10 year warranty
Part No. 46902 -
- 2 x LC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46305 -
- 2 x LC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46296 -
- 2 x LC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125µm type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46288
