-
LC OM3 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.2 meter (7.87 in) -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 0.2 meter(~7.9 inch) -
- 3.5mm Stereo Jack Male to 3.5mm Stereo Jack Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35450 -
- SATA 1.0a and SATA II compatible
- Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports
- Can also be used with standard non-latching SATA ports
- 10 year warranty
-
- Securely connects a motherboard to an HDD, SSD or optical drive
- Latching connectors ensure a reliable and secure connection to devices
- Supports both latching and standard motherboards and devices
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.
Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.
With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.
" -
This high quality USB extension lead complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.- Can be used with either USB 1.1 or USB 2.0 devices
- Ideal for extending the cable length of smaller USB devices such as Memory Sticks, WLAN and Bluetooth Dongles, MP3 Players etc.
- USB Type A Male to USB Type A Female
- Fully moulded and shielded
- 10 year warranty
Part No. 31653 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Stylish transparent cable
- Ideal for use as a replacement USB lead for your printer, scanner etc.
- USB Type A Male to USB Type B Male
- Fully moulded
- Length: 0.2m
- 10 year warranty
Part No. 31703 -
LC OM3 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.3 meter (11.8 inch)
-
LC OM1 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Multimode 62.5/125, Orange Jacket, Beige Connector, 0.3 meter (11.8 in) -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 45870 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45757 -
-
- Full CAT6 specification with molded boots
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- 10 year warranty
Part No. 44845 -
-
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45785 -
- Full CAT6 specification with moulded snagless boots
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45815 -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45770 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45800 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44940 -
- Full CAT6 specification with molded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Cross Over
- 1000Base-T supported
- Color: gray cable with red connector
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 45100 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 0.3m
- 10 year warranty
Part No. 30784 -
- Allows you to connect a SATA drive equipped with a slimline SATA power connector to your PC's drive controller and power supply
- Combined data & power cable for use with drives which feature a slimline SATA power connector
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Male Data + 5.25″ Male Power
- 10 Year warranty
Part No. 33607 -
LC OM3 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.5meter (19.7 inch)
-
LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.5 meter (1.64 ft) -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Singlemode 9/125, Yellow Jacket, Blue Connector, 0.5 meter(~19.7 inch)
-
USB-C Cable, USB 3.1 Type C Male to Type C Male - 10Gbit - 0.5 Meter (1.64ft) -
-
- Full CAT6 specification with moulded snagless boots
-
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- 10 year warranty
Part No. 45661 -
-
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45758 -
- LSOH cable
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: Grey
- 10 year warranty
Part No. 46921 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45786 -
- Full CAT6 specification with moulded snagless boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45771 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- High-performance video cable for use with VCRs, TVs, DVD players etc.
- Delivers superb clarity, definition and detail
- Connectors: 3 x Phono Male to 3 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37529 -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth:17.28Gbps total
- 10 year warranty
Part No. 41530 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports High Speed resolutions up to 4 x higher than 1080p
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41400 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports resolutions up to 4 x higher than 1080p
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
The CROMO® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.
It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.
HDMI - The Standard for Connecting HDTV
All Digital
No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.One Cable
All of your HD video and audio in one cable.Say goodbye to cable clutter.
One HDMI cable can replace up to 8 audio and 5 video cables.
" -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth: 2.7Gbps per lane (total10.8Gbps)
- 10 year warranty
Part No. 41540 -
- USB 2.0 High Speed compliant
- Backwards compatible with USB 1.1/1.0 computers
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41593 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41617 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 41600 -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44941 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. This short length is ideal for use as a patch cable between rack equipment or effects pedals.Part No. 6010 -
- Quality, high performance cable from one of the world's leading brands
- Represents excellent value for money
- Triple shielded cable construction for optimum RF and EMI protection
- Solid core construction
- 1080p over HDMI ready
- Supports resolutions up to 1080p,
- ARC and CEC compatible
- Deep Color capable, x.v.Color and xvYCC ready
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41370 -
-
- Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control functions
-
- Compatible with HDTV and HDCP (High-Bandwidth Digital Content Protection) - the content scrambling standard for modern, advanced digital video displays and DVD players
-
- Connectors: HDMI Male/Male, Type A
-
- 10 year warranty
Note:- Some projectors have recessed HDMI sockets. The dimensions of the recess need to be large enough to accommodate the HDMI connector used on this cable. The connector dimensions are 23 x 36 x 14mm (WxDxH).
Part No. 41140 -
-
- For use with computers, digital displays, DVD players, projectors, LCD screens and Plasma TVs
- Supports high-bandwidth, uncompressed digital video
- Compatible with HDTV - the content scrambling standard for modern, advanced digital video displays and DVD players
- Connectors: HDMI Type A Male to DVI-D Single Link Male
- 10 year warranty
Part No. 41100 -
- HDMI Type A to HDMI Type D (Micro HDMI)
- HDMI 1.4 compliant, supporting Ultra HD up to 4K 2160p30 and 4K 3D
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
- 10 year warranty
- Lengths available: 0.5m, 2m and 3m
" -
- HDMI 1.2 and HDMI 1.3b CAT 2 HD 1080p compatible+
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- For use with the latest generation digital camcorders, displays and other devices which feature Mini HDMI connectors
- Gold plated contacts and connectors for optimum signal transfer and resistance to tarnishing and corrosion
- Supports high-bandwidth, uncompressed digital video and digital audio
- Fully HDMI compliant and certified
- HDCP compatible
- Connectors: Mini HDMI Type C Male to Mini HDMI Type C Male
- 10 year warranty
Part No. 41135 -
Our Premium Gold HDMI cable features advanced design and construction for the highest quality and maximum reliability.The triple shielded, low attenuation cable provides superb clarity, definition and detail, even over longer distances, whilst the 24K gold plated connectors allow for excellent, consistent signal transfer.It's the perfect choice for home cinema and professional display installations.Part No. 37400 -
- ATC (Authorised Test center) certified for high speed
- Shielded cable construction for optimum RF and EMI protection
- 24K gold plated contacts
- Supports resolutions up to 1080p and higher, multi channel audio
- 3D over HDMI ready
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Low profile design, ideal for recessed connectors
- Stranded core construction
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41110 -
- CAT 2 HD 1080p compatible
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- 3D over HDMI ready
- Allows the latest generation digital camcorders and other devices with Mini HDMI connectors to be connected to standard HDMI equipped displays and projectors
- Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
- Fully HDMI compliant and certified
- 10 year warranty
- Lengths available: 0.5m - 3m
" -
- Internal data and power extension cable
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Female Data + 6 Pin Slimline SATA Female Power
- 10 Year warranty
Part No. 33650 -
Data- and power supply cable for USB peripherals! This cable provides power to a bus-powered USB peripheral with an amperage of up to 1A (e.g. disk drive enclosure or USB 2.0 hubs). A USB type A connection provides 500 mA and a data connection; the second USB Type A connection supplies an additional 500 mA when needed.Part No. 31779 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 31980 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Double shielded construction
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 31990 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Double shielded construction
- LINDY USB 3.0 Pro Cables use a higher quality construction for a better quality, more durable cable
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 31890 -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
- Fully shielded cable with moulded connectors
- color: black/additional red USB plug (current only)
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.
" -
This high quality USB extension lead complies fully with the USB 3.0 specification allowing data transfer speeds of up to5Gbps.- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to5Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Female
- Length: 0.5m
- 10 year warranty
Part No. 31480 -
Can be used with either USB 1.1 or USB 2.0 devices. Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec. Stylish transparent cable. Ideal for use as a replacement USB lead for your printer, scanner etc. USB Type Mini-A Male to USB Type B Male. Fully moulded. Length: 0.5m. 10 year warranty.Part No. 31627 -
- USB Type A Male to USB Micro B Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
Part No. 31663 -
- USB Type A Male to USB Micro-B 90 Degree Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
-
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Micro A Male to USB 2.0 Type Mini B Male
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31960 -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- USB 2.0/OTG Type Mini A Male to USB 2.0 Type Micro B Male
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31805 -
LC OM3 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.6 meter (23.6 inch)
-
LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 0.6 meter (1.97 ft)
-
LC OM1 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Multimode 62.5/125, Orange Jacket, Beige Connector, 0.6 meter (23.6 in)
-
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Singlemode 9/125, Yellow Jacket, Blue Connector, 0.6 meter(~23.6 inch)
-
- Securely connects a motherboard to an HDD, SSD or optical drive
- Latching connectors ensure a reliable and secure connection to devices
- Supports both latching and standard motherboards and devices
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.
Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.
With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.
" -
1 5/16 inch Magnetic J-Hook rated to 17 lbs, Top Mounted, 360 Degree Rotation, UL Listed, 10 Pieces/BagPart No. 30MA-01102 -
1 5/16 inch Magnetic J-Hook rated to 17 lbs, Side Mounted, UL Listed, 25 Pieces/BagPart No. 30MA-01202 -
1 inch Black Magnetic Cable Holder, Strong Polymer Cable Holder, 10 lbs Pull Strength, UL Listed, 10 pieces/bagPart No. 30MA-12203 -
1 inch High Performance J Hook, Batwing Clip, Black, 25-Pack -
1 inch High Performance J Hook, Batwing Clip, Blue, 25-Pack -
1 inch High Performance J-Hooks, Standard Mount, Black, 25-Pack -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31001 -
This 1 meter (~3.3 feet) aqua 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41001 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31001 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21001 -
This 1 meter (3.3 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32001 -
DVI-A cables are designed to carry an analog signal. This 3.24 foot black cable is perfect if you have a newer graphics card with a DVI output and a monitor that only supports VGA. DVI cables are used with newer video cards and monitors for higher resolution. DVI-D (Digital) can not convert to VGA (Analog). Only DVI-A (Analog) can be converted into VGA (Analog).Part No. 10V4-05301BK -
Our 1 meter (3.3 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 5 meters, longer lengths will require our thicker 24 gauge cable or an amplifier: Part # 41H1-144DV.Part No. 10V2-05301BK-F -
Our 1 meter (3.3 foot) black DVI-D Single Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your monitor or HDTV. Single link DVI cables support high definition resolutions of up to 1920 x 1200 which will cover 1080p (1920 x 1080) - enough to satisfy most HD fans. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 1920 x 1200 resolution displays is 5 meters, longer lengths will require our thicker gauge cable or an amplifier: Part # 41H1-144DV. The maximum length cable for a display with a resolution up to 1280 x 1024 is 15 meters, beyond that you would need an amplifier.Part No. 10V1-05301BK -
This 1 meter (3.3 foot) IEEE-488 cable is used to connect certain medical equipment. With a CN24 Male and Female on each end, you can daisy chain multiple cables from one port. With an aluminum foil and braid shielding, this 26 AWG (American Wire Gauge) cable will provide you with the signal you need.Part No. 11E1-01701 -
This 1 meter (~3 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11001 -
This 1 meter (~3 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11101 -
This 1 meter (~3 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-01201 -
This 1 meter (~3 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01201 -
This 1 meter (~3 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11101 -
This 1 meter (3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31001 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11001 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11101 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01201 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11101 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11001 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01201 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11101 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11001 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01201 -
This USB 3.1 Type C Male to Type C Male cable features increased 3.1 transfer speeds up to 10GB as well as the new reversible Type-C USB connector, which is completely reversible. These are the latest and greatest cables in the world of USB.Part No. 10U3-31101 -
- Low profile PCIe
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP compatible
- IEEE 1284 standard
- Supports PCIe Base Specification Rev 1.1
- Supports x1, x2, x8, x16 (lane) PCIe Bus connector keys
- Card Connector: 25 Way D Female
- Software Compatibility: Windows 2000/ME/XP/Vista/Windows 7/Server 2003, 2008, Linux Kernel 2.6.x
- Chipset: Oxford OXPCIe840
- 2 Year warranty
Part No. 51246 -
- Supports Type: 32/64 Bit Systems
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP
- Card Connector: 25 Way D Female
- Software Compatability: 2000/XP/Server 2003/Vista (32/64 Bit)/7 (32/64 Bit), Linux
Part No. 51185 -
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MBps
- I/O Address: LPT 1-6
- IRQ Selection: Plug & Play
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Server 2003, 2008/Vista/7, Linux
- 2 year warranty
Part No. 51305 -
1 Port PoE Injector, Adds Power to Standard Network Line. The 74X5-07112 is a Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data power) port that is designed for small or medium network environments. This product can convert standard 100~240V/AC power into lowvoltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receiving power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding a PoE Splitter (74X5-02112) to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators do not need to use AC power adapters anymore.Part No. 74X5-07112 -
This 1-Port Stainless Steel Wallplate with water seal is water resistant to ensure a dry installation in both wet and dirty industrial environments. A stainless steel mounting screw and O ring are included.Part No. 30X8-71001 -
This white surface mount box is designed to house 1 keystone of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-314SE -
1 x 8 Telephone ModulePart No. 80-0070 -
1-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0001-BK -
1-Gang Recessed Low Voltage Cable Plate, BrownPart No. 45-0001-BR -
Cable Plate with Flexible Opening, 1-Gang, Lite AlmondPart No. 45-0014-LA -
1-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0001-LA -
Cable Plate with Flexible Opening, 1-Gang, WhitePart No. 45-0014-WH -
24 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, Plenum Rated, Black, Spool, 1000ft -
1.25 inch Magnetic Bridle Ring, 90 lbs pull strength, 1/4-20 threading, 10 pieces/bagPart No. 30MA-01302 -
This ivory 1.25 inch raceway piece serves as a ceiling entry for a clean transition from the office to the ceiling/crawl space. This covers both aesthetics, protection and cleanliness. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-004IV -
Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, speaker etc. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration, or in the home to hide/protect the speaker cables/wires.This covers aesthetics, protection and organization. 1.25Part No. 31R2-004WH -
This ivory 1.25 inch raceway piece is a flat elbow (90 degree), it is designed to lay flat on the ground and bridge two straight 1.25 inch raceway runs at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-001IV -
This white 1.25 inch raceway piece is a flat elbow (90 degree), it is designed to lay flat on the ground and bridge two straight 1.25 inch raceway runs at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-001WH -
This ivory 1.25 inch raceway piece serves as either an inside corner or a base for an up/down wall run. It allows the installer to connect two longer straight raceway sections at a corner or transition a run from the floor to the wall. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-009IV -
This white 1.25 inch raceway piece serves as either an inside corner or a base for an up/down wall run. It allows the installer to connect two longer straight raceway sections at a corner or transition a run from the floor to the wall. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-009WH -
This ivory 1.25 inch raceway piece serves as a transition where the cables need to run around the outside of a corner (the wall will be to the inside of the corner piece). It allows the installer to connect two longer straight raceway sections at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-007IV -
This white 1.25 inch raceway piece serves as a transition where the cables need to run around the outside of a corner (the wall will be to the inside of the corner piece). It allows the installer to connect two longer straight raceway sections at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-007WH -
This ivory 1.25 inch raceway piece serves as an end cap to cap the end of a cable raceway. This covers both aesthetics, protection and cleanliness. It will prevent ends from being hit and possible chipped or cracked and it will keep unwanted dust bunnies (junk) out of your runs. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-005IV -
This white 1.25 inch raceway piece serves as an end cap to cap the end of a cable raceway. This covers both aesthetics, protection and cleanliness. It will prevent ends from being hit and possible chipped or cracked and it will keep unwanted dust bunnies (junk) out of your runs. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-005WH -
This ivory 1.25 inch raceway piece serves as a junction between two straight raceway pieces. Per the name it covers joints providing a more attractive seam and maintaining rigidity of the run. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-002IV -
This white 1.25 inch raceway piece serves as a junction between two straight raceway pieces. Per the name it covers joints providing a more attractive seam and maintaining rigidity of the run. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-002WH -
This ivory 1.25 inch raceway piece serves as a junction for three straight cable raceway runs coming together (one of the runs will be perpendicular to the other two). It allows the installer to connect three longer straight raceway sections at a junction spot. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-006IV -
This white 1.25 inch raceway piece serves as a junction for three straight cable raceway runs coming together (one of the runs will be perpendicular to the other two). It allows the installer to connect three longer straight raceway sections at a junction spot. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R2-006WH -
This ivory raceway piece serves as a raceway reducer. It transitions between 1.25 inch and 1.75 inch runs. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R3-003IV -
This white raceway piece serves as a raceway reducer. It transitions between 1.25 inch and 1.75 inch runs. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R3-003WH -
Box of 20 - 1.25 inch Surface Mount Cable Raceway, Ivory, Straight 6 foot Section -
Box of 20 - 1.25 inch Surface Mount Cable Raceway, White, Straight 6 foot Section -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-02201.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-06101.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-02101.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-03101.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-07101.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-09101.5 -
Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-08101.5 -
This is a 1.5 standard computer/monitor power cable. This power cord fits most computers, monitors, printers home theater receiver, and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01201.5 -
Cat6 Black Flat Ethernet Patch Cable, 32 AWG, 1.5 foot
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
