-
100TX to 100FX-SC MM Converter w/PS (power source). Use this 100TX to 100FX SC Converters with PoE Injectors to allow users to connect to different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments. The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. ?The converter includes PD signature sensing and power monitoring features. ?Other advantages include over-current protection, under-current detection and fault protection input. ?The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. ?The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.Part No. 71F1-301SC
-
Ethernet to Single Mode Fiber Optic Converter, RJ45 (100Base-TX) to Fiber-SC (100Base-FX) 20km.
The 71F1-112SC SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The 71F1-112SC is able to operate in temperatures from -10 up to 55 Celsius. The converter can be used as a standalone unit or as a module.
Features- Transfers data from 10/100Base-TX copper to fiber interfaces
- Single-mode fiber with SC connector for transmission of up to 20km
- Built-in LFP (Link Fault Pass-through) (LLCF/LLR) Technology
- IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
- Dip switches for customized configuration
- Supports low-time lag transmission
- Supports the transmission of extra-long packets up to 1.6KB
- -10C to 55C operating temperature range
Part No. 71F1-112SC -
RJ45 (100Base-TX) / Fiber-SC (100Base-FX) Converter multimode 2km. We provide a complete series of media conversion solutions for flexible network extensions. The ET-9103SC media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km. Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed. The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant. Use with SC Multi-Mode - 62.5/125um or 50/125um (support up to 2km)Part No. 71F1-101SC
-
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Quad LC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. Connectivity Center LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Quad LC Connectors
- Aqua for OM3 and OM4 10 Gigabit applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-22160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex LC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Duplex LC Connectors
- Aqua for OM3 and OM4 10 Gigabit applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-21160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex SC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Duplex SC Connectors
- Aqua for OM3 and OM4 10 Gigabit applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-20060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Quad LC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Quad LC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-12160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex LC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Duplex LC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-11160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex SC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Duplex SC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-11060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode SC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Multimode Duplex SC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-10060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode LC Quad Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Singlemode Quad LC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-02160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode Duplex LC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Singlemode Duplex LC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-01160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode Duplex SC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Singlemode Duplex SC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-01060 -
LGX Compatible Adapter Plate featuring a Bank of 8 Singlemode ST Connectors, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 8 Singlemode ST Connectors
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-00380 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode SC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Singlemode SC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-00060 -
1U Swing Out Fiber Optic Patch Panel, Capacity 2 LGX Adapter Plates / Cassettes / Modules, Unloaded, Black Powder Coat. Our 1U Swing Out Patch Panel accommodates 2 LGX adapter plates, modules or cassettes. It is designed to house fiber terminations and accommodate patching of fiber links. The swing-out design offers easy access to cable and splices located in the patch and splice bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. These units can be flush mounted or mounted with 3.5 inch protrusion from the rack with no additional accessories. Rack mount installs into a standard 19 inch rack with included mounting hardware. Adapter panels and 23 inch telco rack mounting brackets are sold separately. Details
- Swing Out Shelf
- Holds 2 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Flush Mount or 3.5 inch Protrusion; No Accessories Required
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 11.5in D x 1.75in H
Part No. 68F2-10210 -
4U Fiber Optic Patch Panel, Capacity 12 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 4U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 12 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details
- 19 or 23 inch rack mountable (23 inch mounting brackets sold separately)
- Accepts 12 LGX style adapter plates, modules or cassettes
- Vertically mounted panels with cable retaining rings on the front entry
- Hinged front and rear removable doors
- Dimensions: 17in W x 14in D x 7.125in H
- Powder coated 0.60 inch Aluminum
Part No. 68F1-41220 -
2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details
- Slide Out Tray with Spring Loaded Stop Latch
- Holds 6 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20610 -
2U Fiber Optic Patch Panel, Capacity 4 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 4 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details
- Slide Out Tray with Spring Loaded Stop Latch
- Holds 4 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20410 -
LGX Styled Blank plate with No Holes Unloaded - Black Powder Coat. Cover up unused LGX slots in our fiber patch panels with this LGX Styled Adapter Plates are easy snap-in style mount for use in Rack and wall-mount enclosures. Available in black powder coat. Details
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in FIS Rack and wallmount enclosures
- Multimode adapters utilize a phosphour bronze alignment sleeve
- Singlemode and APC adapter utilize a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F1-20010 -
4U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 4U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details
- Flush Mount 4U Enclosure within a standard Rack
- Compatible Enclosures- 4U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19040 -
2U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 2U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details
- Flush Mount 2U Enclosure within a Standard Rack
- Compatible Enclosures- 2U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19020 -
1U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 1U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details
- Flush Mount 1U Enclosure within a Standard Rack
- Compatible Enclosures- 1U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19010 -
1U Fiber Optic Patch Panel, Capacity 3 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 1RU Patch Panel provides many flexible fiber patching configurations in a 1RU form factor. It accommodates (3) LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. Rackmount installs into a standard 19-inch rack. Includes non-flush brackets for 19-inch racks. Adapter plates, 23-inch mounting brackets, and 19-inch flush mount brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low-density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our rack mount enclosures fit standard 19-inch racks and cabinets. Details
- Slide Out Tray with Spring Loaded Stop Latch
- Holds 3 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 1.75in H
Part No. 68F1-10320 -
This 1-meter 62.5/125 mode conditioning fiber optic patch cable allows Gigabit 1000 Base-LX and 10GBASE-LRM routers and switches to be installed into existing multimode cable plants. This particular cable uses duplex ST connectors on the singlemode side and duplex ST connectors on the multimode side. The single mode leg is marked by a yellow jacket, this leg should always be plugged into the transmit of the single mode device in order for the connection to function. Mode conditioning fiber patch cables eliminate the effects of Differential Mode Delay (DMM) by offsetting the entry point of the singlemode laser as it enters the multimode medium.Part No. STST-12101
-
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11110
-
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11103
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11101
-
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11003
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11002
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11001
-
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01210
-
This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01205
-
This 4 meter (~13 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01204
-
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01203
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01201
-
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11110
-
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11103
-
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11101
-
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11003
-
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002