web analytics
  • This high quality USB extension lead complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.
    • Can be used with either USB 1.1 or USB 2.0 devices
    • Ideal for extending the cable length of smaller USB devices such as Memory Sticks, WLAN and Bluetooth Dongles, MP3 Players etc.
    • USB Type A Male to USB Type A Female
    • Fully moulded and shielded
    • 10 year warranty
    Part No. 31653
    • Full CAT5e specification with moulded boots
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Gigabit Ethernet ready
    • 100% performance tested
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
    • Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
    • 10 year warranty
    Part No. 45870
    • Full CAT6 specification with moulded boots and unique connector latch protection
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45770
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6A S/FTP PIMF, LSZH  
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.

     

    Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

     

    Available colors: Black, Blue, Grey, Red.

    "
    • Full CAT6 specification with molded snagless boots
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Cross Over
    • 1000Base-T supported
    • Color: gray cable with red connector


    Pinout:
    1 ---- 3
    2 ---- 6
    3 ---- 1
    4 ---- 7
    5 ---- 8
    6 ---- 2
    7 ---- 4
    8 ---- 5
    Part No. 45100
      • Full CAT6 specification with moulded snagless boots
      • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
      • Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
      • 100% performance tested
      • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
      • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
      • 10 year warranty
    Part No. 45661
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6 S/FTP PIMF, LSZH   
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.

     

    Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.

     

    Available colors: Black, Blue, Gray, Red.

    "
    • Full CAT6 specification with moulded snagless boots and unique connector latch protection
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45771
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6A S/FTP PIMF, LSZH  
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.

     

    Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

     

    Available colors: Black, Blue, Grey, Red.

     

    "
    • Fully shielded cable with 24K gold plated contacts
    • Stylish chrome plated connector hoods
    • DisplayPort 1.2 HD 1600p compatible
    • Full support for high definition video, multi-channel digital audio and DPCP
    • Supports resolutions up to 2560 x 1600
    • Supports 8 channel, uncompressed 24bit audio
    • DisplayPort compliance certified
    • 24K gold plated connector pins
    • Bandwidth:17.28Gbps total
    • 10 year warranty
    Part No. 41530
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Supports High Speed resolutions up to 4 x higher than 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty

    Click here to compare the main cables from our HDMI range.
    Part No. 41400
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Supports resolutions up to 4 x higher than 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty

     

    The CROMO® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.

     

    It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.

     

    HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.

     

    HDMI - The Standard for Connecting HDTV

     

    All Digital
    No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.

     

    One Cable
    All of your HD video and audio in one cable.

    Say goodbye to cable clutter.

    One HDMI cable can replace up to 8 audio and 5 video cables.

     

     

    "
    • Fully shielded cable with 24K gold plated contacts
    • Stylish chrome plated connector hoods
    • DisplayPort 1.2 HD 1600p compatible
    • Full support for high definition video, multi-channel digital audio and DPCP
    • Supports resolutions up to 2560 x 1600
    • Supports 8 channel, uncompressed 24bit audio
    • DisplayPort compliance certified
    • 24K gold plated connector pins
    • Bandwidth: 2.7Gbps per lane (total10.8Gbps)
    • 10 year warranty
    Part No. 41540
    • USB 2.0 High Speed compliant
    • Backwards compatible with USB 1.1/1.0 computers
    • Upgraded 99.99% OFC copper conductors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type Micro-B Male
    • Length: 0.5m
    • 10 year warranty
    Part No. 41593
    • USB 3.0 SuperSpeed compliant
    • Full Duplex cable capable of transfer rates up to 5 Gbps
    • Upgraded 99.99% OFC copper conductors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type Micro-B Male
    • Length: 0.5m
    • 10 year warranty
    Part No. 41617
    • USB 3.0 SuperSpeed compliant
    • Full Duplex cable capable of transfer rates up to 5 Gbps
    • Upgraded 99.99% OFC copper conductors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type A Male
    • Length: 0.5m
    • 10 year warranty
    Part No. 41600
    • HDMI Type A to HDMI Type D (Micro HDMI)
    • HDMI 1.4 compliant, supporting Ultra HD up to 4K 2160p30 and 4K 3D
    • Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
    • Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
    • 10 year warranty
    • Lengths available: 0.5m, 2m and 3m

     

     

     

    "
  •  

    • For use C6 HDMI 4x4 Matrix Extender Premium
    • Extend HDMI, IR, Ethernet & RS-232 over a single CAT5e/6/7 Cable
    • Supports resolutions up to Full HD 1080p @ 60Hz, including Bluray 1080p 3D
    • Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
    • Includes HDBaseT PoE functionality for remote powering via C6 HDMI 4x4 Matrix Extender Premium
    • 2 Year Warranty

     

     

    The C6 HDMI Receiver Premium with HDBaseT Technology has been designed to work with our C6 HDMI 4x4 Matrix Premium. The C6 Receiver Premium supports the transmission of high definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D), multi-channel digital audio and control via IR and RS-232 over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each output.

     

    The C6 HDMI Receiver supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that the C6 HDMI Receiver Premium does not require its own separate power supply as it receives its power directly from the C6 HDMI Matrix via the HDBaseT connection, allowing for greater flexibility in installations and the LAN serving function allows devices such as Smart TVs to be connected to the network/internet.

     

    This flexible feature rich product has been designed to be used in a number of different applications, such as:

     

    • Domestic HDMI Matrix system
    • Video/TV wall display and control
    • Security surveillance and control
    • Commercial advertising, display and control
    • University Lecture hall display and control
    • Retail Sales and demonstration
    Part No. 38218
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6 S/FTP PIMF, LSZH   
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.

     

    Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.

     

    Available colors: Black, Blue, Gray, Red.

    "
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6A S/FTP PIMF, LSZH  
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.

     

    Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

     

    Available colors: Black, Blue, Grey, Red.

     

    "
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Tested to support resolutions up to 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty
    Click here to compare the main cables from our HDMI range.
    Part No. 41406
    • DVI-D Dual Link Extension Cable
    • For use with all modern digital monitors, projectors, and TFT/LCD Flat Panel Displays
    • Dual Link digital connection supports display resolutions of up to 2560 x 1600
    • Patent Pending, RF-BLOK shielding design
    • Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
    • 10 Year Warranty
     
    Just one of our huge range of DVI cables and DVI leads. For connecting DVI devices at distances of over 10m, use our Super Long Distance DVI Cables and for DVI with analog support use our DVI-I cables.
    Part No. 41248
    • VI-D Single Link Male to DVI-D Single Link Male
    • For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
    • UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
    • RF-BLOK shielded design
    • 10 Year Warranty

     

    LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).

     

    Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.


    Features of the RF-BLOK shielded design:

     

    • Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

     

    • Increased insulation resistance up to 25%

     

    • No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

     

    • Tight fit of internal wires as there is no inner mould

     

    • No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

     

    • Smaller overall dimensions which allows more room behind the host or peripheral

     

    • Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

     

    "
    • Full CAT5e specification with moulded snagless boots
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45962
    • Full CAT6 specification with moulded boots and unique connector latch protection
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45772
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Supports High Speed resolutions up to 4 x higher than 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty

    Click here to compare the main cables from our HDMI range.
    Part No. 41401
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Supports resolutions up to 4 x higher than 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty

     

    The CROMO® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.

     

    It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.

     

    HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.

     

    HDMI - The Standard for Connecting HDTV

     

    All Digital
    No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.

     

    One Cable
    All of your HD video and audio in one cable.

    Say goodbye to cable clutter.

    One HDMI cable can replace up to 8 audio and 5 video cables.

     

     

     

     

    "
    • Fully shielded cable with 24K gold plated contacts
    • Stylish chrome plated connector hoods
    • DisplayPort 1.2 HD 1600p compatible
    • Full support for high definition video, multi-channel digital audio and DPCP
    • Supports resolutions up to 2560 x 1600
    • Supports 8 channel, uncompressed 24bit audio
    • DisplayPort compliance certified
    • 24K gold plated connector pins
    • Bandwidth: 2.7Gbps per lane (total10.8Gbps)
    • 10 year warranty
    Part No. 41551
    • Ultra flexible, light cable with low profile, slimline HDMI connectors
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and strain relief
    • HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p60 and 4K 3D
    • Supports 3D 1080p and HDCP
    • 10 year warranty
    • Lengths available: 0.5m-4.5m

     

    The CROMO® Slim High Speed HDMI Cable with Ethernet is an affordable, high quality cable featuring gold plated contacts for better conductivity and resistance to corrosion and tarnishing.

     

    This super thin and flexible HDMI cable has been specially designed for connection to devices in confined spaces or with restricted access to the HDMI ports. The slim form factor also reduces the weight of the cable by around 80% compared to the standard CROMO® cables making it perfect for connecting to awkwardly placed devices in a rack or to displays mounted close to a wall.

     

    HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance. Ethernet support allows compatible devices to connect to the internet

     

    HDMI - The Standard for Connecting HDTV

     

    All Digital

    No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.

     

    One Cable

    All of your HD video and audio in one cable.

    Say goodbye to cable clutter.

    One HDMI cable can replace up to 8 audio and 5 video cables.

     

    "
    • USB 2.0 High Speed Compliant
    • 480 Mbps transfer rates
    • Backwards compatible with USB 1.1/1.0 computers
    • Upgraded 99.99% OFC copper conductors
    • Gold plated connectors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type B Male
    • Length: 1m
    • Color: anthracite
    • 10 year warranty
    Part No. 41581
    • Full CAT6 specification with molded snagless boots
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Cross Over
    • 1000Base-T supported
    • Color: gray cable with red connector


    Pinout:
    1 ---- 3
    2 ---- 6
    3 ---- 1
    4 ---- 7
    5 ---- 8
    6 ---- 2
    7 ---- 4
    8 ---- 5
    Part No. 45102
  • Easily extend your DisplayPort connections with this superb DisplayPort Extension cable. It benefits from advanced design and construction to provide the best possible performance and reliability. This 1600p compatible cable has 24K gold plated connector pins to ensure superb signal integrity and corrosion resistance. The shielded cable design allows consistent performance, even over longer transmission distances.
     
    • DisplayPort 1.1a HD 1600p compatible
    • Full support for 48 bit Color depth high definition video, multi-channel digital audio and DPCP
    • 24K gold plated connector pins
    • Supports resolutions up to 2560 x 1600 and 1600p
    • Supports 8 channel, uncompressed 24bit audio
    • Bandwidth: 2.7Gbps per lane (total10.8Gbps)
    • DisplayPort compliance certified
    • 10 year warranty
     
    2mand 3m DisplayPort Extension Cables are also available.
    Part No. 41330
    • DVI-D Dual Link Lead
    • Ideal for use as an LCD monitor cable or DVI projector cable
    • Dual Link digital connection supports display resolutions of up to 2560 x 1600
    • Patent Pending, RF-BLOK shielding design
    • Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
    • 10 Year Warranty
    Just one of our huge range of DVI cables and DVI leads. For connecting DVI devices at distances of over 10m, use our Super Long Distance DVI Cables and for DVI with analog support use our DVI-I cables.
    Part No. 41239
    • Can be used with either USB 1.1 or USB 2.0 devices
    • Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
    • Extends cable length between USB devices such as keyboards, mice, printers, scanners, etc
    • USB Type A Male to USB Type A Female
    • Fully moulded
    • 10 year warranty
    Part No. 31654
    • Connects two serial devices to a local area network
    • Supports: RS-232, RS-422 & RS-485 serial devices
    • 10/100 Mbps Auto-sensing Fast Ethernet port
    • Configuration via:
      • IP Server Management Mode for Windows
      • Web Browser
      • Telnet
    • Tough metal housing, ideal for industrial use
    • Compatible with Windows Vista/2003/XP/2000/NT/98/ME
    • Dimensions: 85 x 115 x 23mm (WxDxH)
    • 2 year warranty
     
    4 Port versionalso available, LINDY Part No. 25105
     
    A range of serial cables and serial cards are available from LINDY
    Part No. 25104
    • Shielded cable construction for optimum RF and EMI protection
    • 24K gold plated contacts
    • Tested to support resolutions up to 1080p and higher, multi channel audio
    • 3D over HDMI ready
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Low profile design, ideal for recessed connectors
    • Stranded core construction
    • 10 year warranty
    Click here to compare the main cables from our HDMI range.
    Part No. 41118
    • 2 x ST fiber Optic Male to 2 x SC fiber Optic Male
    • Compatible with all standard fiber optic equipment and connectors
    • Full duplex 62.5/125µm multimode fiber
    • Zip twin 2.8mm
    • Low Smoke Zero Halogen cable
    • Ceramic connectors ensure low signal loss and high reliability
    • Total immunity to electrical and electromagnetic interference (EMI)
    • Insertion loss: 0.5db (max)
    • Includes insertion loss test report
    • Color: Grey
    • 10 year warranty

    NOTE: Picture is for illustration purposes only
    Part No. 46066
    • DVI-D Single Link Cable
    • For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
    • XGA (1024 x 768) and HDTV 720i (1280 x 720) compatible
    • Patent pending, RF-BLOK shielded design
    • Connectors: DVI-D Single Link Male to DVI-D Single Link Male
    • 10 Year Warranty
    Part No. 41263
  •  
      • Full CAT5e specification with molded boots
      • Gigabit Ethernet ready
      • 100% performance tested
      • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
      • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
      • Useful for color coding your departments, workgroups, etc.
      • 10 year warranty
    Part No. 44723
    • Full CAT5e specification with moulded boots
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45963
    • Full CAT6 specification with moulded boots and unique connector latch protection
    • Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
    • Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
    • Gigabit Ethernet ready
    • 100% performance tested
    • Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
    • Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
    • Useful for Color coding your departments, workgroups, etc.
    • 10 year warranty
    Part No. 45773
    • Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
    • Cat.6A S/FTP PIMF, LSZH  
    • Integrated snagless connector for latch protection
    • Gold plated pins for better conductivity and elimination of signal loss
    • 10 year warranty

     

    Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.

     

    Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.

     

    The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

     

    Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

     

    Available colors: Black, Blue, Grey, Red.

     

    "
    • 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
    • Ethernet support allows IP devices to connect to the internet via a compatible HD TV
    • Supports resolutions up to 4 x higher than 1080p
    • Full support for HEC, ARC and CEC compliant devices
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • Very compact connector size - ideal for use with recessed HDMI sockets
    • 10 year warranty

     

    The CROMO® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.

     

    It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.

     

    HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.

     

    HDMI - The Standard for Connecting HDTV

     

    All Digital
    No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.

     

    One Cable
    All of your HD video and audio in one cable.

    Say goodbye to cable clutter.

    One HDMI cable can replace up to 8 audio and 5 video cables.

     

    "
    • Fully shielded cable with 24K gold plated contacts
    • Stylish chrome plated connector hoods
    • DisplayPort 1.2 HD 1600p compatible
    • Full support for high definition video, multi-channel digital audio and DPCP
    • Supports resolutions up to 2560 x 1600
    • Supports 8 channel, uncompressed 24bit audio
    • DisplayPort compliance certified
    • 24K gold plated connector pins
    • Bandwidth: 2.7Gbps per lane (total10.8Gbps)
    • 10 year warranty
    Part No. 41542
    • USB 2.0 High Speed compliant
    • Backwards compatible with USB 1.1/1.0 computers
    • Upgraded 99.99% OFC copper conductors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type Micro-B Male
    • Length: 2m
    • 10 year warranty
    Part No. 41595
    • USB 3.0 SuperSpeed compliant
    • Full Duplex cable capable of transfer rates up to 5 Gbps
    • Upgraded 99.99% OFC copper conductors
    • Double shielded construction
    • Fully moulded
    • USB Type A Male to USB Type A Male
    • Length: 2m
    • 10 year warranty
    Part No. 41602
    • CAT 2 HD 1080p compatible
    • Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
    • 3D over HDMI ready
    • Allows the latest generation digital camcorders and other devices with Mini HDMI connectors to be connected to standard HDMI equipped displays and projectors
    • Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
    • Fully HDMI compliant and certified
    • 10 year warranty
    • Lengths available: 0.5m - 3m

     

     

     

    "
    • 6 Pin Mini DIN Male to 6 Pin Mini DIN Female
    • Fully moulded
    • 10 year warranty
    "

Title

Go to Top