The Lindy HDMI to VGA converter converts signals from a HDMI equipped source into a VGA signal. It supports resolutions up to 1920x1200@60Hz for VGA displays. This allows the connection of HDMI capable devices, such as PC’s, notebooks and ultrabooks, to an older VGA display or projector.
The converter can also be used to add another display to extend the available desktop workspace. It is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.
"
Blocks HDMI CEC signals when there is an incompatibility
Use this adapter when you have problems with incompatibilities between IR remote controls; such problems tend to occur now and then in installations with HDMI splitters and -switches.
The adapter does not pass on the CEC signal further. In principle, you only need to use this adapter upstream of the incompatible devices. However, several adapters installed upstream of a number of devices can be used.
"
The LINDY premium SVGA cables have ferrite cores to reduce interference for the best quality picture. Available in lengths from 0.25m up to 50m, all LINDY SVGA cables come with a 10 year warranty.
"
This splitter cable allows two monitors to be connected to a computer's single VGA port. It's a passive cable which simply splits a single VGA signal into two without any amplification or signal regeneration, making it an ideal, cost effective solution for shorter installations.
"
This simple device gives system administrators, installers and technicians a physical way of preventing people from interfering with LC Fiber Optic connections. This increases security against the risk of unauthorized tampering.
The LC Security Block is made up of a simple 'block' that attaches to the LC Fiber Optic connector. The connector and block are then inserted into the required port as normal, until the block clicks into place. To remove, plug the key into the block and remove the block from port.
Just one of our huge range of DVI cables and DVI leads. For connecting DVI devices at distances of over 10m, use our Super Long Distance DVI Cables.
A guide to DVI is also available.
Use this RJ45 port lock around RJ45 sockets to prevent unwanted connection of connection cables. Also prevents unauthorised access via the network.
The lock secures itself to the RJ45 port and can be removed again with the appropriate key. It locks with the front panel of the RJ45 port inside the housing prevent it from being simply pulled out.
Safety information: For safety reasons, please note that these locks can also be removed without the key with skill and an appropriate tool.
Please note: this key is only compatible with the corresponding color of port blocker.
"
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
"
The LINDY USB Power Meter plugs directly into any powered USB port. It allows for easy, convenient monitoring of output voltage and operating current. It quickly tells you if your USB socket is providing power normally and if devices are receiving enough power to operate. A LED display allows you to instantly read the information without affecting the performance of the device.
It is ideal for monitoring the power usage of an external drive or other USB peripherals as well as checking the power demands of your smartphone, tablet etc. It can also be used to check the different power outputs of your computers USB Ports, wall charger, battery pack, or even a USB enabled solar panel. Compatible with Quick Charge technology it can easily read any voltage up to 24 volts or measure any current up to 6 amps.
Depending on the orientation of your USB Ports combining the USB Power Meter with one of our Passive Type A Male to Female USB Extension Cables or 90 Degree Male to Female L-Adapters, will allow for easier positioning and viewing of the LCD display.
Please note - USB sockets will only output as much power as is demanded by the device you are charging, the USB Power Meter will show the voltage and amperage being delivered from the USB port. It will not show the maximum possible power output from the USB socket.
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
The LINDY premium SVGA cables have ferrite cores to reduce interference for the best quality picture. Available in lengths from 0.25m up to 50m, all LINDY SVGA cables come with a 10 year warranty.
"
"
The Lindy USB Active Extension Cable Pro is a high performance active cable that allows access to USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension cable can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m
.
The 8m and 12m cable, and the 8m and 12m hub, feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
"
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
