web analytics
  • This 15 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.
    Part No. 10H1-20215
  • This 25 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.
    Part No. 10H1-20225
  • This 8 inch HD15 Male to HD15 Female monitor cable splitter will split a low resolution video signal coming from a computer so that you can display the same image on 2 monitors. This cable is good for resolutions only up to 800 x 600. It is recommended to keep the cable runs from this splitter to 15 ft or less. If you are looking to go farther than 15 ft, you will need to use one of the following distribution amplifiers or you may lose quality of signal: 41H1-14812, 41H1-14814, 41H1-14818 or 41H1-148116.
    Part No. 10H1-27708
  • Our 6 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-29106
  • Our 10 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-29110
  • Our 15 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-29115
  • Our 25 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-29125
  • Our 50 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-29150
  • Our 100 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.
    Part No. 10H1-291HD
  • This 6 foot black KVM (Keyboard/Video/Mouse) cable is specifically made to connect a VGA KVM switch with PS2 mouse and keyboard to a computer. A KVM switch is used to share a single monitor, mouse and keyboard between 2 computers. This KVM cable consists of one male SVGA (HD15), and two male PS2 (MiniDin6) connections on both ends. The PS2 connectors are color coded green for your mouse and purple for your keyboard.
    Part No. 10H1-30106BK
  • This 3 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.
    Part No. 10H1-61103
  • This 6 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.
    Part No. 10H1-61106
  • This 10 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor dual link This cable does not support audio.
    Part No. 10H1-61110
  • This 3 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-64103
  • This 6 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-64106
  • This 10 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-64110
  • This 15 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-64115
  • This 3 foot Displayport to VGA cable will allow you to connect a VGA monitor to a DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-65103
  • This 6 foot Displayport to VGA cable will allow you to connect a VGA monitor to a DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-65106
  • This 10 foot Displayport to VGA cable will allow you to connect a VGA monitor to a DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-65110
  • This 6 inch cable is designed to adapt newer PS/2-style keyboards to older DIN5 (AT) motherboard connections. Just plug the male DIN5 end into the appropriate port on your computer, and plug your PS2 keyboard into that. You can now use your newer keyboard on your older computer.
    Part No. 10I5-012HF
  • This 6 inch cable is designed to convert older DIN5 (AT)-style keyboards to the newer PS/2 connection. Just plug the male PS2 end into the appropriate port on your computer, and plug your DIN5 keyboard into that. You can now use your older keyboard on your newer computer.
    Part No. 10I5-013HF
  • This 6 foot cable is referred to as a Din 5 (male). It is an older AT keyboard cable. This cable's pinout is straight through which means pin 1 on one end is connected to pin 1 on the other end. It is round and larger than the more recent MiniDin6 connector that replaced it for a time in keyboards and Mice. USB has since replaced the MiniDin6 (PS/2) connector which would then make Din5 a Grandfather. Congrats to Din5!
    Part No. 10I5-02106
  • This 10 foot cable is referred to as a Din 5 (male). It is an older AT keyboard cable. This cable's pinout is straight through which means pin 1 on one end is connected to pin 1 on the other end. It is round and larger than the more recent MiniDin6 connector that replaced it for a time in keyboards and Mice. USB has since replaced the MiniDin6 (PS/2) connector which would then make Din5 a Grandfather. Congrats to Din5!
    Part No. 10I5-02110
  • This 3 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01103
  • This 6 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01106
  • This 10 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01110
  • This 15 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01115
  • This 25 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01125
  • This 50 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01150
  • This 3 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.
    Part No. 10M2-01203
  • This 6 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.
    Part No. 10M2-01206
  • This 10 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.
    Part No. 10M2-01210
  • Our 6 foot MiniDin8 Apple/Mac serial cable features MiniDin8 male ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.
    Part No. 10M3-04106
  • Our 6 foot MiniDin8 Apple/Mac serial extension cable features a MiniDin8 male and female ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.
    Part No. 10M3-04206
  • This is a 6 foot VHDCI 68 to HPDB68 SCSI III cable with gold-plated connectors for superior data transfer and thumb screws to securely attach the cable between the host and the device.
    Part No. 10N3-01106
  • This is a 3 foot high quality external SCSI II device cable that features gold-plated connectors on 25 twisted pairs for superior data transfer. This particular cable features a Half Pitch DB50 (HPDB50) male connector on one end and a DB50 male on the other.
    Part No. 10P1-02103
  • This is a 6 foot high quality external SCSI II device cable that features gold-plated connectors on 25 twisted pairs for superior data transfer. This particular cable features a Half Pitch DB50 (HPDB50) male connector on one end and a DB50 male on the other end.
    Part No. 10P1-02106
  • This is a 3 foot high quality black external SCSI II device cable that features screw tight gold-plated connectors on 34 twisted pairs for superior data transfer. This particular cable features a Half Pitch DB68 (HPDB68) male connectors on both ends.
    Part No. 10P2-39103
  • Our Black 6 inch Micro USB Cable is perfect for the purse or the pocket and goes well with portable battery-based chargers. It meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.
    Part No. 10U2-03100.5BK
  • Our 3ft Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro type-B male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB micro B connection is a very commonly used connection on cell phones, GPS units, and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.
    Part No. 10U2-03103BK
  • Our Black 6 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.
    Part No. 10U2-03106BK
  • Our Black 10 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backwards compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.
    Part No. 10U2-03110BK
  • Our Black 15 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backwards compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.
    Part No. 10U2-03115BK
  • Our blue 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.
    Part No. 10U3-02110
  • Our 1 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.
    Part No. 10UM-02101BK
  • Our 3 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.
    Part No. 10UM-02103BK
  • Our 6 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.
    Part No. 10UM-02106BK
Go to Top