web analytics
  • This is a 1.5 standard computer/monitor power cable. This power cord fits most computers, monitors, printers home theater receiver, and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01201.5
  • Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • This is our high quality F-Pin coaxial cable typically used with VCRs, TVs, cable boxes, satellite receivers, etc. With the 1000 ft spool you'll need to crimp the RG6 connectors onto it with our Crimping Tool, Part # 91D5-05500.
    Part No. 10X4-022TH
  • This high-quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.
    Part No. 10X4-022NH
  • This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.
    Part No. 10X4-18222NH
  • Outdoor runs of RG6 require cable that is specifically designed for that environment. Our direct burial/outdoor rated RG6 cable is UV rated for protection from direct sunlight. Using a cable that is not UV rated would cause the cable to deteriorate over time, and cause the signal to fail eventually. This cable can also be used for direct burial scenarios as well. Just dig a trench, and lay this cable in with the peace of mind that you will receive a reliable signal.
    Part No. 10X4-622NH
  • Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.
    Part No. 10X4-122TH
  • This bulk coax cable features a high-grade solid 18 AWG copper conductor and is fully sweep tested to 3GHz. For maximim shield retension, this cable has an aluminum foil shield bonded to the dielectric plus 60% aluminum braid shield. The jacket is lead-free, flame retardent PVC with an UV inhibitor to resist sun damage.
    Part No. 10X4-2022TH
  • Bulk RG6U Coaxial Cable, White, 18 AWG Pure Copper Solid Core, 3 GHz, Pullbox, 1000 foot
    Part No. 10X4-2091TH
  • This Black Quad Shielded RG6 Coaxial Cable is designed for use in environments with higher levels of interference. It is ideal for transmitting video signals for Cable TV, Satellite TV, CCTV, Security/Surveillance cameras and more. It features a RG6 Coaxial Cable constructed with an outer aluminum and magnesium braid layer (40% coverage), an aluminum foil layer, an inner braid constructed similarly as the outer but featuring 95% coverage and one more aluminum foil layer.
    Part No. 10X4-122NH
  • RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, Black, 1000 ft, Pullbox
    Part No. 10X4-2122TH
  • RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, White, 1000 ft, Pullbox
    Part No. 10X4-2191TH
  • Shielded Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • This 100 foot black high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that dont have RCA or any of the newer audio/video connections.
    Part No. 10X4-011HD
  • Our Hospital Grade 10 foot Green-Dot NEMA 5-15P power cord is rated for use in hospitals and other medical settings. Featuring clear connectors, you can be sure this durable power cord will hold up to the demanding needs of hospital application. This cord has three 18 AWG conductors, is rated to 10 Amps at 125 Volts and is RoHS certified.
    Part No. 10W1-51010
  • Hospital Grade Green Dot Power Cord, Nema 5-15 to C13, 18 AWG, SJT, 10 Amp / 125 Volt, Black, 10 foot
  • This 10 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.
    Part No. 10W1-13210
  • This is a 12ft heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01212
  • This 12 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-02212
  • This 12 foot black shielded computer/monitor/printer power cord features a C13 (female) connector on one end and a NEMA 5-15P (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable's primary use is computer, monitor and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-51212
  • This is a 15ft heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01215
  • Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Spool, 500 foot
  • Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Pullbox, 500 foot
  • Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CM / Inwall rated, Pullbox, 500 foot
  • This is a one-foot standard computer/monitor power cable. This power cord fits most computers, monitors, printers home theater receiver, and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01201
  • This 1 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-02201
  • This 1 foot Notebook/Laptop power cord features a NEMA 5-15P (male 3 prong) connector on the wall side and a C5 (female 3 conductor) on the Notebook/Laptop side. This is a polarized power cable designed to connect a wall socket and your Laptop/notebook power brick. This particular version has 3 conductors.
    Part No. 10W1-15201
  • This 1 foot cable/adapter converts a standard Computer/Monitor power cable into a three prong power extension cable. Converts C13 end to a NEMA 5-15R end and supports up to a 10 amp load.
    Part No. 10W1-05201
  • This is a 1 foot standard power Y / Splitter cable. This power cable features the NEMA 5/15P (standard three prong power plug) to dual NEMA 5/15R (female) power cord. Use this cord to split a single power line to two lines. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 18AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 10 Amps power. Operating temperature is 75C/167F.
    Part No. 10W1-04201Y
  • This 25 foot black high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that dont have RCA or any of the newer audio/video connections.
    Part No. 10X4-01125
  • This is a 25 foot standard computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01225
  • This 25 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-02225
  • This 3 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-02203
  • This 3 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.
    Part No. 10W1-13203
  • Power Cord Adapter, Black, C14 to NEMA 5-15R, 10 Amp, 3 foot
  • Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Security/Alarm Wire, White, 18/4 (18AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Pullbox, 500 foot
  • Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Spool, 500 foot
  • This 50 foot black high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that dont have RCA or any of the newer audio/video connections.
    Part No. 10X4-01150
  • This is a 50 foot standard computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01250
  • This 6 foot black RG6 BNC cable is used for connecting BNC compatible devices such as security cameras. RG6 coax cable is the standard typically used for connecting a security camera to a DVR. These BNC patch cables have a male BNC connector on each end and are made up of RG6 coaxial cable featuring an 18 AWG (American Wire Gauge) center conductor. The aluminum foil shield and 60% aluminum braided shield help prevent any interference that may distort your signal.
    Part No. 10X4-02106
  • This 6 foot cord features a standard US 3-prong plug on one end and bare wires on the other. This converts back and forth between a 3-prong power plug and a bare end. Perfect for special power applications. Color is black.
    Part No. 10W1-10106
  • This 6 foot black high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that dont have RCA or any of the newer audio/video connections.
    Part No. 10X4-01106
  • This is a standard power cord with a convenient right angle for use with computers, monitors, most printer and various other devices.
    Part No. 10W1-06206
  • This is a 6ft standard computer/monitor power cable. This power cord fits most computers, monitors, printers home theater receiver, and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.
    Part No. 10W1-01206
  • This 6 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.
    Part No. 10W1-02206
Go to Top