-
Our blue bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a blue shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.Part No. 13X6-561NH
-
Our red bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a red shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.Part No. 13X6-571NH
-
Our yellow bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a yellow shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.Part No. 13X6-581NH
-
Our white bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a white shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.Part No. 13X6-591NH
-
This cable is constructed of two Cat6 cables (Blue and Grey) and two RG6 cables (Black and White) bundled inside of an outer jacket (CM Rated) and a maximum operating temperature of 75C. Each Cat6 cable is constructed with 4 solid copper 23AWG twisted pairs and a center spline. Jacket is CM Rated. Each RG6 coaxial cable is quad shielded 3.0 GHz: outer aluminum braid (40% coverage), outer double foil of aluminum, inner aluminum braid (60% coverage) and one more aluminum foil layer. The center conductor is CCS (copper clad steel)Part No. 14X4-161NF
-
This Gray Bulk CAT5E comes in a 1000 foot spool. This is a shielded twisted pair that is plenum-rated (CMP). Each of the wires in the cable is solid 24AWG (American Wire Gauge) pure copper. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling have different requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in-wall or plenum use could actually cause the fire to become more intense. Plenum-rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluoridated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11X6-521NH
-
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-012NH
-
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-012NH
-
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38074 -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-306NH
-
This Quad Shielded White RG6 cable comes in an easy to use and store 1000 foot pullbox. The cable is constructed of the following: outer jacket made from low smoke PVC, aluminum outer braid (40% coverage), aluminum mylar foil (25% overlap), inner aluminum braid (60% coverage), aluminum mylar foil (25% overlap), foam FEP (fluorinated ethylene propylene) dielectric and an 18AWG solid copper center conductor.Part No. 11X4-191TH
-
Control the power of up to 12 devices via WAN or LAN
- Inputs: 2 x IEC 320 C20 Plugs
- Outputs: 12 x IEC 320 C14 Sockets
- Each C20 plugs powers 6 x C14 sockets
- Built in DHCP client
- Configurable via a web browser or included software
- Network Connectivity: Ethernet 10/100Mbs Fast Ethernet
- 2 Year Warranty
-
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either at the Cat.5 KVM switch MC5/-IP as a user station or as a stand-alone KVM extender with matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat.5 cables. This Cat.5 KVM module is already integrated in the KVM switch.Part No. 32358
-
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38075 -
- Provides real time KVM access to remote systems
- Use Local & Remote consoles simultaneously
- Plug & Play installation no additional drivers required, uses standard USB drivers
- Connect two VGA monitors, USB keyboard & mouse as well as stereo speakers to the remote receiver unit
- Use low cost network cables CAT5/5e/6 to connect devices
- Supports VGA signals with resolutions up to 1600 x 1200 or 1920 x 1080
- Supports standard USB keyboards & mice
- Supports analog stereo 3.5mm Jack
- Includes image enhancements for focus and gain
- Robust metal housing
- Dimensions (each unit): 19.3x8.5x2.5cm (WxDxH)
- 2 year LINDY warranty
Part No. 39396 -
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38076 -
This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-306NH
-
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-206NH
-
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-206NH
-
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-206NH
-
- Allows console operation at extended distances of up to 200m using CAT5/5e/6 cable
- Local workstation may be connected using a suitable CAM, please click here
- Connects to your USB keyboard and mouse and VGA monitor
- Supports display resolutions of up to 1600 x 1200 @ 75m, 1024x768 @ 200m
- Power supply included
- Allows your USB keyboard, mouse and monitor to be located up to 200m away from your computer using low cost CAT5/5e cable
- Provides a convenient and secure method of remotely locating workstations and fileservers without compromising control and convenience
- Installs in minutes - no special software required
Important: This product is solely for use with the MC5, MC5-IP ans SC5 KVM Switch range. It is not a standalone KVM Extender solution. The picture above shows front and rear views of a single unit. See our range of KVM Extenders.Part No. 39357 -
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38077 -
Our gray plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.Part No. 11X8-521NH
-
Our black plenum solid Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a a convenient spool. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a plenum rated black solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 11X8-522NH
-
Our red plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.Part No. 11X8-571NH
-
Our yellow plenum solid Cat6 Ethernet cable comes in easy to use spools. It is used for networking and phone infrastructure. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This cable is a plenum rated yellow solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 11X8-581NH