-
Bulk Plenum Zipcord Fiber Optic Cable, Duplex, multimode 62.5/125 OM1, Corning InfiniCor 300, Orange, Spool, 1000 foot -
Jonard Tools Fiber Optic Connector Cleaning Kit - TK-182 -
Armored 6 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OS2 9/125 Singlemode, Corning Optical Fiber, Riser Rated, Black, Spool, 500 foot -
Shielded Cat5e Gray Solid Copper Ethernet Cable, F/UTP, POE & TAA Compliant, Pullbox, 1000 foot -
Shielded Cat5e Blue Solid Copper Ethernet Cable, F/UTP, POE & TAA Compliant, Pullbox, 1000 foot -
Plenum Security Cable, White, 18/2 (18 AWG 2 Conductor), Stranded, CMP, Spool, 1000 foot -
Security/Alarm Wire, Gray, 22/6 (22AWG 6 Conductor), Stranded, CM / Inwall rated, Pullbox, 1000 foot -
2U Fiber Optic Patch Panel, Capacity 4 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 4 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 4 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20410 -
Bulk Cat8 Blue S/FTP Ethernet Cable, Solid, 23AWG, 40Gbps - 2000MHz, 300 Foot, Spool -
2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, Corning, 10 Gbit, Black, Riser Rated, Spool, 1000 foot -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-302NH -
The LINDY Console Switch provides a flexible way to use one or more computers from up to 4 different consoles, located in different places. Depending on how it is connected, it can be used to drive up to four video displays (video splitting) or allow up to four consoles to access a KVM switch or computer (resource sharing).The LINDY Console Switch supports a wide 280MHz bandwidth, for very high screen resolutions of up to 1900 x 1440 (with standard cables). When long cable runs (of up to 30m) are required, the LINDY Console Switch features a video boost option to ensure that picture quality repower crisp.Thanks to smart power control, the use of the supplied external power supply is optional for most applications. This can be handy when spare power sockets are not close at hand.The LINDY Console Switch uses standard PS/2 and VGA connectors throughout for quick and easy connection to host systems and peripherals alike.- Versatile switch for console sharing, video splitting and resource sharing applications
- Fully automated sharing / switching on a timeout basis
- Allows a single video feed to be simultaneously displayed on up to four monitors
- Supports display resolutions of up to 1900 x 1440
- Flash upgradeable
Part No. 39123 -
Armored Plenum 6 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OS2 9/125 Singlemode, Corning Optical Fiber, Black, Spool, 500 foot
-
2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 6 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20610 -
This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-302NH -
Our 75 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss. This cable also features a plenum (CMP) rated jacket. This means the plastics used to create the jacket are designed to burn less than non-plenum rated cables thus reducing the chances for fires to be spread. This cable meets the strictest requirements for any building codes.Part No. 11H1-29175 -
Fiber Distribution Panel Enclosure, Rack Mount, 1RU, 3 Plate/Cassette Openings -
Fiber Distribution Panel Enclosure, Rack Mount, 2RU, 6 Plate/Cassette Openings -
ProSeries Pass Through Cat6/6a UTP Starter Kit, 1ea (S45-1700P, S45-C101, S45-801, S45-S01YL , S45-B002) -
- Provides a convenient and secure method of remotely locating workstations or servers without compromising convenience and control
- Distances of up to 300m supported between local and remote units
- Dual console operation - control your computer / KVM Switch from both local and remote locations
- High-resolution video support: 800 x 600 @ 300m; 1600 x 1200/1680 x 1050 @ 200m
- Easy, user-friendly installation - no special software required
- 2 Year warranty
Part No. 39397 -
6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 62.5/125, Orange, Riser Rated, Spool, 1000 foot -
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-006NH -
Plenum MTP Fiber Optic Cable, Type A, 12 Strand, 50/125 OM4, 40/100 Gbps, MTP Female, 15 meter (49.2 foot) -
Shielded Plenum HDMI Active Optical Cable, 4K@60, Black, HDMI Male, 75 foot -
Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Spool, 500 foot -
6 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 62.5/125, Black, Riser Rated, Spool, 1000 foot -
A shielded CAT-5E cable will retain a high quality signal when passing near or parallel to high voltage or power cables. CAT-5E cables are primarily used for networking, data transfer, and phone lines. CAT-5E cables can support 10 / 100 / 1000Mbps.Part No. 10X6-551TH -
This is a yellow bulk 1000 foot spool of plenum fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-006NH -
Plenum 2 Strand Indoor Distribution Fiber Optic Cable, OS2 9/125 Singlemode, Corning, Yellow, Spool, 2000 foot -
100TX to 100FX-SC MM Converter w/PS (power source). Use this 100TX to 100FX SC Converters with PoE Injectors to allow users to connect to different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments. The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. ?The converter includes PD signature sensing and power monitoring features. ?Other advantages include over-current protection, under-current detection and fault protection input. ?The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. ?The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.Part No. 71F1-301SC -
LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Magenta Jacket, Beige Connector, Spool, 150 meter (492 ft) -
Our gray bulk 1000ft stranded Cat6a Ethernet cable comes in an easy to use spool and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6a Cable is used in network applications and have been designed specifically for 10-Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and 10-gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Cat6a cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 13X6-021MH -
Our blue bulk 1000ft stranded Cat6a Ethernet cable comes in an easy to use spool and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6a Cable is used in network applications and have been designed specifically for 10-Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and 10-gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Cat6a cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 13X6-061MH -
Bulk Phone Cord, Black, 26/6 (26 AWG 6 Conductor), Spool, 1000 foot. This is an 1000 foot black bulk reel of phone cable.This spool is sold with bare ends; you can choose your own from a variety of different connectors.Part No. 8606-4500SBK -
Security/Alarm Wire, Gray, 16/2 (16AWG 2-Conductor), Stranded, CM / Inwall rated, Spool, 1000 foot -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-202NH -
Our 100 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.Part No. 11X3-251HD -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a black, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-522NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a green, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-551NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a red, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-571NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a white, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-591NH -
Shielded Cat6 Ethernet Cable, Solid 23 AWG Copper, POE Compliant, Blue, Spool, 1000 foot -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-202NH -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
Our bulk 1000 foot stranded Cat6 Shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This is a gray shielded stranded cable. The individual conductors are 24AWG (American wire gauge) stranded pure copper for improved flexibility. Pure copper conductors provide the best signal possible. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-521SH -
Our bulk 1000 foot stranded Cat6 Shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This is a blue stranded cable. The individual conductors are 24AWG (American wire gauge) stranded pure copper for improved flexibility. Pure copper conductors provide the best signal possible. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-561SH -
- Universal fit, supports most plasma and LCD displays weighing up to 50kg
- Compatible with displays with mounting screw hole distances of up to 800mm high and 450mm wide
- Securely fit and easily remove screens for maintenance
- Heavy gauge steel construction with powder coated silver finish
- Adjustable height: from 112cm to 180cm from the ground (measured to the center of the display bracket)
- Adjustable design allows the screen to be tilted up to 15°
- Includes four omni-directional, locking wheels for portability
- Includes a sturdy shelf that can be fixed at either a higher or lower level
- An additional Plasma Trolley Shelf is available if required
- Assembly required
Please note: Please check your TV is under the maximum supported weight before orderingPart No. 40736 -
Box of 20 - 3/4 inch Surface Mount Cable Raceway, Ivory, Straight 6 foot Section
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
