-
Control up to four 4 USB equipped computers with only one monitor, USB keyboard and mouse!
- Monitor, keyboard, mouse, microphone and speakers are directly connected to the ports of the switch.
- If needed, you can connect a USB hub to the switch, so that other USB devices, such as Pen Drives, USB hard drives, card readers, etc. can be connected and you will have access to the devices with USB 1.1 speed ** when switching between computers.
- Speakers and microphone can be excluded from being switched by using Windows or Mac software
- Switching between the two connected PC`s can be done in several ways:
- via keyboard hotkey: 2 x Scroll Lock key
- via switch button on top of the switch
- via KVM Switch software and the icon on the taskbar (Windows) or dock (Mac)
- via Hotkeys: `Ctrl + Alt + [*]', [*] are the keys 1-4
Part No. 32827 -
Our 6 foot locking HDMI High Speed cable features a simple slide lock mechanism to secure your connections and prevent accidental disconnection. The HDMI cable is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio in resolutions up to 4K (Ultra HD). HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with any device with HDMI such as HDTVs, DVD players, Blu-ray players, game consoles (PS3, Xbox 360), cable and satellite set top boxes, DVRs, computers, etc.Part No. 10V3-45106
-
This 100ft Cat6 4-Pair SSTP (double shielded) Outdoor Ethernet Patch Cable is designed for even the harshest industrial environments. This cable's water resistant caps allow the cable to be run though environments with both water and dirt. This patch cable features a 26AWG pure copper stranded wire and is filled with a CMX rated gel. RoHS compliant.Part No. 10X8-722HD
-
This 100ft Bootless Plenum Cat5e Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties.The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X6-121HD
-
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202010J
-
12-Outlet surge protector, 4200 Joule. 2 USB ports. 2.1A total. 6 grounded outlets and 6 wide-spaced grounded outlets for transformer plugs. 6 foot cord with right-angle NEMA 5-15 plug. Black.. This 12-outlet surge protector is loaded with features to help protect your valuable electronic and multimedia equipment from potential damage caused by power surges. The right-angle plug allows for connection in tight spaces where furniture is close to the wall outlet. The 6 wide spaced outlets are designed to allow for transformer-type power bricks to be plugged in while not blocking additional power outlets. Specifications
- Dimensions: 2.13" x 7.13" x 14.26"
- Joules: 4200
- Coax protection for CATV and Broadband lines
- RJ11 and RJ45 protection
- 6 foot cord with right-angle plug
- 2-port USB charger(2.1 A total)
- ETL Certified
Part No. 51W1-32206 -
Rackmount Vented Component Shelf, 19 inch Rack 12 inch deep, 1U. The 1U 12 inch Vented Component Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs.The 1U 12 inch Vented Component Shelf has the strength you need and the venting pattern will allow for maximum air flow.Part No. 61S1-21201
-
This 100ft Bootless Plenum Cat6 Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties.The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X8-121HD
-
- Perfect for connecting older SCART equipped DVD players, set top boxes, VCRs etc to HDMI displays
- View audio and video from a SCART source in 720p
- Plug & Play - simple to install and use
- Upscales to HDMI 1.2 at 720p
- HDCP 1.1 & DVI 1.0 compliant
- Compatible with RGB and composite video capable source devices
- Supports NTSC and PAL systems
- Multi country power supply included
- 2 year warranty
Part No. 38101 -
The LANID is an essential tool for verifying and troubleshooting local area networks. It is designed for network administrators to quickly diagnose problems during LAN installation and repair. With a simple push of a button, the LANID will display the status of network devices, whether it is running a 10BASE-T or 100BASE-T network. Furthermore, the LANID is also equipped with a Portfinder function to quickly identify the corresponding port location on the Switch/Hub. The compact design provides the user with optimum convenience and portability.Part No. 31D3-56655
-
CATV coaxial drop/subscriber amplifier, 1 Port, 1GHz. A coax drop amplifier is used to combat weak signal from a provider's 'drop' to your home. A 'drop' is the run from a pedestal or distribution box to your home. Drop amplifiers are available in one, two, and four port versions. These drop amplifiers have sealed F ports, powder coated paint, and an RFI hermetically sealed back plate. Features
- 1 GHz Bandwidth
- Hermetically Sealed case and Ports
- Low Noise Figure: 3 dB
- High Return Input Capability
- Direct or Line Powering Capability
- High Return Loss
- Surge Protected (IEE C62.41-1991, All Ports)
- 130 dB RFI Shielding
- LED Power Indicator
Forward Path Frequency 54 - 1000 MHz Gain (+/- 1 dB) 15 dB Flatness ±0.5 dB Maximum Output (157 Ch) 44 dBmV Cross Mod -75 dB CSO -62 dB CTB -75 dB Noise Figure (+/- 0.5dB) 3 dB Return Loss (In/Out) 20 dB RFI Shielding Effectiveness 110 dB Reverse Path Frequency 5 - 42 MHz Gain -1 dB Flatness ±0.5 dB Noise Figure (+/- 0.5dB) N/A General Power Supply (Included) 12 VDC @ 200 mA Power Inserter (Optional) HRPI Operating Temperature -40℉ to +140℉ Fahrenheit Dimensions 5 x 2.75 x 1 inches Weight 1 lb Connectors F-Type Part No. 40X3-10401 -
This crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45 Connector in one simple operation. The ratcheted straight action crimping motion ensures a uniform crimp every cycle. This tool features precision cast crimping dies for superior accuracy. The all-steel frame has a rust-resistant black oxide finish. For use with all EZ-RJ45 Cat5e & Cat6 Connectors.Part No. 100004C
-
Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)Part No. 202044J
-
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C
-
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode LC Quad Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details
- 6 Singlemode Quad LC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-02160 -
V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the V-Rack provides users more versatility on where they can place their products while saving them space. Available in 2U, 3U and 4U. includes tabbed style rails, and includes screwsPart No. 61R2-24202
-
- Extends RGB, Component and Co-Ax audio over CAT5e or higher cable
- Consists of a transmitter and receiver unit
- Very easy to install - simply connect the cables
- No power supply required
- Supports transmission distances of up to 180m* (video and audio) or 300m* (video only)
- Dimensions (each unit): 82 x 67 x 25mm (WxDxH)
Part No. 32525 -
- VI-D Single Link Male to DVI-D Single Link Male
- For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
- UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
- RF-BLOK shielded design
- 10 Year Warranty
LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).
Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.
Features of the RF-BLOK shielded design:- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one