web analytics

    • Designed for notebooks with 15? to 17? size screens
    • Height adjustable stand for lifting notebook display to create a more comfortable typing angle
    • Allows a free flow of air underneath the notebook for effective passive cooling and heat dissipation
    • 360? rotating base allows the notebook to be swivelled around to share with others - perfect for meetings, training and demonstrations
    • Very compact and light portable design
    • Distance between front and rear stand: 220mm (Min) - 260mm (Max)
    • Dimensions: 328 x 298mm (WxD)
    A Rotating Notebook Stand suitable for notebooks with sreens from 12? to 14? in size is available here.
    Part No. 40505
  • This adapter is perfect for connecting an RCA video source into an S-Video slot. Great for older devices that don't have an S-Video out. 24K gold connectors provide superior conductivity and accurate signal transfer.
    Part No. 30S2-03220
    • Extends S-Video and Stereo L + R audio over CAT5e or higher cable
    • Consists of a transmitter and receiver unit
    • Very easy to install - simply connect the cables
    • No power supply required
    • Supports transmission distances of up to 300m*
    Part No. 32523
    • 24K gold plated for excellent signal transfer and resistance to tarnishing and corrosion
    • For use with 50/75 Ohm cables
    Part No. 37576
  • This adaptor is perfect for adapting an S-Video source into an RCA jack. Great for older devices that don't have an S-Video in. The 24K gold connectors provide superior conductivity and accurate signal transfer.
    Part No. 30S2-05500
  • For SAS and SATA 3.5″ hard drives. With support for SAS Dual Channel
    • For 3.5″ SAS or SATA II/1.0a hard drives of all capacities
    • SAS Dual Data Channel support
      • Externally by means of 2 individual SATA 7 pole sockets on the rear
      • Internal: SAS Backplane connection SFF-8482 x2, two-channel, SATA-compatible
    • Connectible, fitted in standard 5.25″ slot, with sufficient room for ventilation and heat dissipation
     
    Part No. 21970
    • For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
    • Screw type SFF-8470 (4x) to eSATA (4x) connectors
    • SAS (Serial Attached SCSI) compliant
    • Full duplex communication up to 6Gbit/s
    • Color: Black
    • 10 Year warranty
    Part No. 33851
    • For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
    • Latch type SFF-8470 (4x) to eSATA (4x) connectors
    • SAS (Serial Attached SCSI) compliant
    • Full duplex communication up to 6Gbit/s
    • Color: Black
    • 10 Year warranty
    Part No. 33856
    • For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
    • Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
    • SAS (Serial Attached SCSI) compliant
    • Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
    • Full duplex communication up to 3Gb each direction/channel
    • Color: Black
    • 10 Year warranty
    Part No. 33641
    • For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
    • Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
    • SAS (Serial Attached SCSI) compliant
    • Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
    • Full duplex communication up to 3Gb each direction/channel
    • Color: Black
    • 10 Year warranty
    Part No. 33643
    • For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
    • Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
    • SAS (Serial Attached SCSI) compliant
    • Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
    • Full duplex communication up to 3Gb each direction/channel
    • Color: Black
    • 10 Year warranty
    Part No. 33631
    • Connects SATA devices with a SATA controller
    • SATA 7 pin Female + 5.25" Male Power to SATA 22 pin Female SFF-8482
    • 0.3m length
    • Compatible with SATA III and backwards compatible with SATA II and I
    • 10 year warranty

     

    The Lindy SATA Data & Power Cable is a high-performance cable, allowing users to connect SATA devices with a SATA Controller.

     

    This combination cable allows you to connect a SATA hard drive to your PCs internal power and SATA data connections. Ideal for use by DIY PC builders and in-house technical teams.

     

    With full support for SATA III and backwards compatibility with SATA II and I.

     

     

    "
    • Data and power cable
    • SATA 7 Pin Male to SATA 7 Pin Male data cable, 50cm
    • SATA 15 Pin Male to 5.25" Male power cable, 15cm
    • 10 Year warranty
    "
    • Securely connects a motherboard to an HDD, SSD or optical drive
    • Latching connectors ensure a reliable and secure connection to devices
    • Supports both latching and standard motherboards and devices
    • Compatible with SATA III and backwards compatible with SATA II and I
    • 10 year warranty

     

    The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, one is 90° angled. Allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.

     

    Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.

     

    With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.

     

     

    "
    • Securely connects a motherboard to an HDD, SSD or optical drive
    • Latching connectors ensure a reliable and secure connection to devices
    • Supports both latching and standard motherboards and devices
    • Compatible with SATA III and backwards compatible with SATA II and I
    • 10 year warranty

     

    The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, one is 90° angled. Allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.

     

    Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.

     

    With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.

     

     

    "
    • SATA 7 Pin Male to 20mm right-angled (90°) SATA 7 Pin Male
    • Length: 50cm
    • Color: Red
    Note: This cable features a short length 20mm right angled SATA connector which is suitable for use in Dell computers.
    Part No. 33443
  • SATA Cable, 0.2m

    $6.00 33369
    • Serial ATA 7 Pin Male to Serial ATA 7 Pin Male
    • Color: Red
    Part No. 33369
  • Serial ATA (SATA) Cable, 180 degree 7 Pin With Latch, 1 meter (3.3 foot)
    • Connects a legacy PSU to a newer SATA device
    • Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
    • 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
    • Perfect for DIY PC builders and in-house technical teams
    • 10 year warranty

     

    The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to a newer SATA device such as a SSD, HDD or Blu-Ray disk drive.

     

     

     

    "
    • 1 x 15 Way SATA Power Connector Female to 2 x 5.25″ Power Female
    • Length: 15cm
    • 10 Year warranty
    Part No. 33288
    • Connects a SATA drive to an internal power supply
    • 5.25" Male Power (LP4) to 15 pin Female SATA Power
    • Can be used to connect legacy power supplies with newer SATA equipped devices
    • Perfect for DIY PC builders and in-house technical teams
    • 10 year warranty

     

    The Lindy Power Adapter Cable is a high-performance adapter that allows users to connect SATA drives with standard 5.25" (LP4) connectors to an internal power supply. Used by DIY PC builders and in-house technical teams this cable is a cost-efficient way of connecting a legacy power supply with newer SATA equipped devices.

     

     

     

    "
    • In-line 15 Way SATA power connector to 5.25″ four pin Female; 3 x additional 5.25″ four pin power connectors
    • Length: 15cm
    • 10 Year warranty
    Part No. 33277
    • 1 x 15 Way SATA power connector Male to Female (pass through) to 3 x 15 way SATA power connectors Male
    • Internal Power Cable
    • Length: 15cm
    • 10 Year warranty
    Part No. 33278
  • SATA 15-Pin Male / Sata 15-Pin Female x 2 Power Y Cable, 6 inch
  • Corning Unicam High-performance Connector, SC, 50 um Multimode (OM3/OM4 Compatible), Ceramic Ferrule, Single Pack, Black Housing, Aqua Boot
  • This SC and ST Fiber Dust Cap will save your fiber optic cable from contamination by dust and/or dirt. Comes in a bag of 100 pieces.
    Part No. 30SX-010HD
  • 95-000-41 Corning Unicam High-performance Connector, SC, 62.5 um Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige Boot
  • Corning Unicam High-performance Connector, SC, Single-mode (OS2), Ceramic Ferrule, Single Pack, Blue Housing, Blue Boot
  • This duplex fiber optic coupler comes with its own housing and will connect two SC-terminated fiber cables together.
    Part No. 31F2-CC410
  • This simplex fiber optic coupler comes with its own housing and will connect two SC-terminated fiber cables together.
    Part No. 31F2-CC400
  • Corning 95-000-40 Unicam Standard-performance Connector, SC, 62.5/125 um Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige Boot
  • Fiber Optic Cable, SC/APC, Singlemode OS2, Duplex, 9/125, Yellow Jacket, Green Boot, 2 meter (6.6 foot)
  • Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 1 meter (3.3 foot)
  • Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 2 meter (6.6 foot)
  • Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 3 meter (10 foot)
  • This 15 meter (~49 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCSC-11015
  • This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCSC-11004
  • This 10 meter (~33 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCSC-11110
  • This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCSC-11105
  • This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCSC-01204
  • This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCST-01210
  • This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCST-01203
  • This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCST-01205
  • SC/UPC Female to SC/APC Male Simplex Adapter
    • Perfect for connecting older SCART equipped DVD players, set top boxes, VCRs etc to HDMI displays
    • View audio and video from a SCART source in 720p
    • Plug & Play - simple to install and use
    • Upscales to HDMI 1.2 at 720p
    • HDCP 1.1 & DVI 1.0 compliant
    • Compatible with RGB and composite video capable source devices
    • Supports NTSC and PAL systems
    • Multi country power supply included
    • 2 year warranty
    Part No. 38101
  • For connection to devices with IEC refrigeration appliance connection to German/French power network
    Part No. 30323
Go to Top