- Converts a mini optical plug to a standard TosLink plug
- Ideal for use with MD players etc.
Part No. 70413
-
-
- Converts a standard TosLink plug to a mini optical Plug
- Ideal for use with MD players etc.
Part No. 70412 -
- 4 Pin FireWire Male (Camcorder, etc.) to 6 Pin FireWire Female
- IEEE 1394 compliant
- Color: Black
Part No. 70395 -
- Mini version
- 10 year warranty
Part No. 70346 -
- Mini version
- 10 year warranty
Part No. 70345 -
This 90 degree bracket adapter allows you to connect VGA cables to the rear of your device in parallel in order to save space. It can be screwed onto the VGA socket and is only a few centimetres deep. It is angled (upwards) across the long edge of the VGA connector.- Provides a VGA socket with screw connection.
- Two double nuts are optional. These can be screwed onto the screws on the connector side where needed.
- Gold-coated contacts and housing for optimum signal transfer and exceptional long-term stability
- All pins connected 1:1
- 10 year warranty
Part No. 70318 -
Modular system This adapter comprises:- RJ45 coupling with 8 connected Crimp connectors, Color-coded.
- 9-pin Sub-D connector,
- Contacts are pluggable in any arrangement
Part No. 70246 -
- Configurable wiring
- Any pin to any pin
- 10 year warranty
Part No. 70245 -
- 40 Way IDC Male & 5¼" Power Male to 44 Way IDC Female
Part No. 70199 -
- 6 Way RJ-11/RJ-12 Female to 6 Way RJ-11/RJ-12 Female
Part No. 70171 -
- An easy way to convert the gender of a cable connection
- Can save wear and tear on expensive ports
-
- Saves wear and tear on your expensive ports
Part No. 70093 -
- An easy way to convert the gender of a cable connection
- Can save wear and tear on expensive ports
Part No. 70092 -
- Saves wear and tear on your expensive ports
Part No. 70082 -
- Saves wear and tear on your expensive ports
Part No. 70074 -
- Saves wear and tear on your expensive ports
Part No. 70073 -
- Saves wear and tear on your expensive ports
-
- Saves wear and tear on your expensive ports
-
- Saves wear and tear on your expensive ports
Part No. 70069 -
- Moulded
- 10 year warranty
Part No. 70030 -
-
- 5 Pin DIN Female to 6 Pin Mini DIN Male
-
- Fully moulded
Part No. 70029 -
-
- Moulded
- 10 year warranty
Part No. 70015 -
This USB to PS/2 adapter cable allows you to connect a USB combo mouse to your computers PS/2 mouse port. Please note this feature is not supported on all USB mice.
- USB Type A Female to 6 Pin Mini DIN Male
- Compatible only with USB/PS/2 combo mice
- Cable length: 15cm
-
Screws, spacers, bolts, nuts and jumpers for PC installation personnelPart No. 66050 -
- 50 Pack
Part No. 66021 -
- 50 Pack
Part No. 66002 -
-
-
- 10 Pack
Part No. 62270 -
- 10 pack
- Crimp type
Part No. 62202 -
- 10 pack
- Crimp Type
Part No. 62201 -
5 packPart No. 62051 -
- 10 pack
Part No. 62050 -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
" -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Accommodates 6 face plate modules
- Supplied with 4 x blank face plate modules
- Flip up cover with identification label
- Suitable for surface mounting
- Multiple cable entries
- Dimensions: 170 x 205 x 55mm (WxDxH)
- Color: White
- Warranty: 2 years
Note: picture shown for illustration only, the shown modules are not included.Part No. 60549 -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation" -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
- RJ-45 Female to RJ-45 Female
- Meets Cat5e requirements
- Unshielded
- Warranty: 2 years
-
- This CAT5e In-Line Termination Block allows you to easily join solid core cables and still maintain performance. Save time and money when moving, adding to or repairing your wiring system.
- IDC punchdown termination block
- Joins solid core FTP cable
- Suitable for extending and repairing structured cabling systems
- Compact shielded construction
Part No. 60173 -
Technical Specifications:- Standard: IEEE 802.11g/b
- Bus Type: USB 2.0, backwards compatible with USB 1.1
- Connector: USB Type A Male
- Frequency Band: 2.4000 - 2.4835GHz (ISM-Band)
- Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) BPSK, QPSK, CCK (11b)
- Radio Technology: Direct Sequence Spread Spectrum (DSSS), Frequency Hopping Spread Spectrum (FHSS)
- Data Rate: 54,48,36,24,18,12,11, 9, 6, 5.5 ,2 ,1 Mbps (Auto fallback)
- Security:
- 64/128/152 Bit WEP
- WPA (TKIP with IEEE802.1x) and AES
- LEDs: Link, Activity
- Sensitivity:
- -72dBm @ 54Mbps
- -85dBm @ 11Mbps
- -93dBm @ 1Mbps
- Transmit Power: 16dBm
- Power Consumption: TX: 340mA, RX: 150mA
- Compatible with Windows 98SE/ME/2000/XP
- Dimensions: 270 x 870 x 90mm (WxDxH)
- Antenna: Internal integrated antenna
Part No. 52031 -
- Bus Type: ExpressCard/34
- Speed: Up to 480Mbps
- Connectors: 2 x Type A USB Female
- Ideal for connecting extra USB peripherals such as printers, scanners, drive housings etc., to your notebook
- Built-in power jack for optional adapter for use when the connected device require power from the USB port
- For use with computers which feature ExpressCard expansion slots
- Compatible with Windows 2000/XP/Vista/Windows 7/Server 2003, 2008 and Mac OS 8.6
- 2 Year warranty
Part No. 51505 -
ExpressCard card, 1 Port. Use CardBus/PCMCIA cards in the ExpressCard slot. This ExpressCard/34 adapter allows you to connect 32Bit CardBus cards (USB 2.0, FireWire, GigaLan, eSATA, Wireless .) to a notebook with ExpressCard/34 or ExpressCard/54 slot. Note: The ExpressCard/34 adapter must be inserted together with the CardBus card when booting up the computer! No hot-pluggable supportPart No. 51355 -
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MBps
- I/O Address: LPT 1-6
- IRQ Selection: Plug & Play
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Server 2003, 2008/Vista/7, Linux
- 2 year warranty
Part No. 51305 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 8/16 Bit ISA
-
- Speed: Up to 921Kbit/sec
-
- I/O Address: COM 1-12
-
- IRQ Selection: 3,4,5,7,9,10,11,12,15
-
- IRQ Sharing: Yes
-
- Card Connector: 37 Way D Female
-
- Adaptor Cable: 4 x 25 Way D Male
-
- Software Compatibility: DOS, Windows 3.1x/95/98/ME/NT/2000/XP, Linux
Part No. 51301 -
-
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port) or EPP (Enhanced Parallel Port)
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
- 3 Year Warranty
Part No. 51286
