Part No. 31X3-01420
-
RG6 BNC Male Crimp On Connector, 2 Piece Set. This crimp BNC connector can be used to terminate stranded RG6 coax cable. Perfect for custom wiring jobs. -
Use this RG6 BNC twist-on plug to terminate an RG6 coaxial cable. Most commonly used with CCTV, Surveillance and Security Video Systems.Part No. ASF-20122 -
F-pin RG6 Coaxial Cable, Black, F-pin Male, 3 foot -
This is a crimp-on F-pin connection that will attach to an RG6 cable and create a TV-style F-Pin connector.Part No. ASF-20038 -
RG6 F-PIN Compression Connector Purple Band 25pcs-bag<-p>.
These RG6 F-PIN Compression Connectors will create a seamless connection for your satellite or cable TV. This part comes with ten pieces per bag and are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network.<-p>
Part No. 31X4-31325 -
These Orange Band RG6 Quad Shield F-Pin Compression Connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. These connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your satellite or cable TV connection.
Part No. 31X4-32325 -
RG6 RCA Compression Connector Purple Band 25pcs-bag<-p>.
These Purple Band RG6 RCA Compression Connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network. This part comes with twenty five pieces per bag.<-p>
Part No. 31X4-31225 -
This is a twist-on F-pin connector for RG6 cable. This adapter will give any RG6 cable an F-pin connection on one end.Part No. ASF-20039 -
RGB Gaming Mouse, USB, Black -
- Extends RGB, Component and Co-Ax audio over CAT5e or higher cable
- Consists of a transmitter and receiver unit
- Very easy to install - simply connect the cables
- No power supply required
- Supports transmission distances of up to 180m* (video and audio) or 300m* (video only)
- Dimensions (each unit): 82 x 67 x 25mm (WxDxH)
Part No. 32525 -
This connection can go on any F-Pin coax male and make it a right angle female for use in tight spaces.Part No. 200-107 -
Right Angled RJ-45 Unshielded Adapter, Down -
- Crimp tool for 8 Way RJ-45 type connectors
- Integral cable cutter and stripper
Part No. 43208 -
- Configurable wiring
- Any pin to any pin
- 10 year warranty
Part No. 70245 -
- RJ-45 Female to RJ-45 Female
- Meets Cat5e requirements
- Unshielded
- Warranty: 2 years
-
- RJ-45 Female to RJ-45 Female, Unshielded
-
-
-
RJ11 plugs are a type of plug typically used for carrying telephone signals. 6P4C means that the contacts on these plugs have 6 positions in which are placed 4 gold plated contacts, a standard for RJ11 jacks. These plugs are also designed for use with stranded wire. These come in a bag of 50.Part No. 31D0-6P4CS -
AB 2 Way Switch Box, RJ12 Female. This two-way RJ12 AB unit will allow you to switch between two different phone-type devices on one jack.Part No. 40R1-01602 -
RJ12 plugs are a type of plug typically used for carrying telephone and data signals. 6P6C means that the contacts on these plugs have 6 positions in which are placed 6 gold plated contacts, a standard for RJ12 jacks. These plugs are also designed for use with stranded wire. They come in a bag of 50.Part No. 31D0-6P6CF -
Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 100 Pieces/JarPart No. 106103J -
Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 500 piecesPart No. 106100 -
RJ45 (100Base-TX) / Fiber-SC (100Base-FX) Converter multimode 2km. We provide a complete series of media conversion solutions for flexible network extensions. The ET-9103SC media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km. Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed. The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant. Use with SC Multi-Mode - 62.5/125um or 50/125um (support up to 2km)Part No. 71F1-101SC -
Phone/Data RJ45 Crimp Connectors for Solid/Stranded Cable, 8P8C, 100 pieces -
RJ45 Strain Relief Boot for 28 AWG Slim cable, Clear, 50 pc -
RJ45 Strain Relief Boots, Green, 50 Pieces Per Bag -
This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools. For phone use only (Note: the color coding on the internal connections does not match Cat5e or Cat6).Part No. 300-88FF-WH -
- Designed for notebooks with 15? to 17? size screens
- Height adjustable stand for lifting notebook display to create a more comfortable typing angle
- Allows a free flow of air underneath the notebook for effective passive cooling and heat dissipation
- 360? rotating base allows the notebook to be swivelled around to share with others - perfect for meetings, training and demonstrations
- Very compact and light portable design
- Distance between front and rear stand: 220mm (Min) - 260mm (Max)
- Dimensions: 328 x 298mm (WxD)
A Rotating Notebook Stand suitable for notebooks with sreens from 12? to 14? in size is available here.Part No. 40505 -
This adapter is perfect for connecting an RCA video source into an S-Video slot. Great for older devices that don't have an S-Video out. 24K gold connectors provide superior conductivity and accurate signal transfer.Part No. 30S2-03220 -
- Extends S-Video and Stereo L + R audio over CAT5e or higher cable
- Consists of a transmitter and receiver unit
- Very easy to install - simply connect the cables
- No power supply required
- Supports transmission distances of up to 300m*
Part No. 32523 -
- 24K gold plated for excellent signal transfer and resistance to tarnishing and corrosion
- For use with 50/75 Ohm cables
Part No. 37576 -
This adaptor is perfect for adapting an S-Video source into an RCA jack. Great for older devices that don't have an S-Video in. The 24K gold connectors provide superior conductivity and accurate signal transfer.Part No. 30S2-05500 -
For SAS and SATA 3.5″ hard drives. With support for SAS Dual Channel- For 3.5″ SAS or SATA II/1.0a hard drives of all capacities
- SAS Dual Data Channel support
- Externally by means of 2 individual SATA 7 pole sockets on the rear
- Internal: SAS Backplane connection SFF-8482 x2, two-channel, SATA-compatible
- Connectible, fitted in standard 5.25″ slot, with sufficient room for ventilation and heat dissipation
Part No. 21970 -
- For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
- Screw type SFF-8470 (4x) to eSATA (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Full duplex communication up to 6Gbit/s
- Color: Black
- 10 Year warranty
Part No. 33851 -
- For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8470 (4x) to eSATA (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Full duplex communication up to 6Gbit/s
- Color: Black
- 10 Year warranty
Part No. 33856 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33641 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33643 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33631 -
- Connects SATA devices with a SATA controller
- SATA 7 pin Female + 5.25" Male Power to SATA 22 pin Female SFF-8482
- 0.3m length
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy SATA Data & Power Cable is a high-performance cable, allowing users to connect SATA devices with a SATA Controller.
This combination cable allows you to connect a SATA hard drive to your PCs internal power and SATA data connections. Ideal for use by DIY PC builders and in-house technical teams.
With full support for SATA III and backwards compatibility with SATA II and I.
" -
- Data and power cable
- SATA 7 Pin Male to SATA 7 Pin Male data cable, 50cm
- SATA 15 Pin Male to 5.25" Male power cable, 15cm
- 10 Year warranty
-
- Securely connects a motherboard to an HDD, SSD or optical drive
- Latching connectors ensure a reliable and secure connection to devices
- Supports both latching and standard motherboards and devices
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, one is 90° angled. Allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.
Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.
With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.
" -
- Securely connects a motherboard to an HDD, SSD or optical drive
- Latching connectors ensure a reliable and secure connection to devices
- Supports both latching and standard motherboards and devices
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, one is 90° angled. Allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.
Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.
With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.
" -
- SATA 7 Pin Male to 20mm right-angled (90°) SATA 7 Pin Male
- Length: 50cm
- Color: Red
Note: This cable features a short length 20mm right angled SATA connector which is suitable for use in Dell computers.Part No. 33443 -
- Serial ATA 7 Pin Male to Serial ATA 7 Pin Male
- Color: Red
Part No. 33369 -
Part No. 20970 -
- Connects a legacy PSU to a newer SATA device
- Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
- 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
- Perfect for DIY PC builders and in-house technical teams
- 10 year warranty
The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to a newer SATA device such as a SSD, HDD or Blu-Ray disk drive.
"
