Part No. PA-6P4C-ST
-
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area where only one jack is available. -
This convenient adapter allows you to plug two phone cables into one jack.Part No. PA-8P8C-ST -
Keystone Insert, Beige, Phone/Data Jack, RJ11 / RJ12 Female to 110 Type Punch Down. If you have been planning to add a new phone line to any area of your home or office, the professionals at CableWholesale can help you get the job done. We offer a number of phone networking equipment, including our selection of Phone/Data Jack Keystone products. This beige keystone insert will allow you to complete an RJ11/RJ12 female to 110 type punch down connection, but that's not all. You can also use it with any of the keystone wall plates sold by CableWholesale. If you would like additional details about this Phone/Data Jack Keystone, you can get in touch with a member of our team today!Part No. 320-120IV -
These RJ22 4P4C Crimp Connectors are for flat telephone cables and come in bags of 100 pieces. The color is clear.Part No. 31D0-440HD -
- 24K gold plated for excellent signal transfer and resistance to tarnishing and corrosion
- Can be used as a coupler or gender changer
- For use with 50/75 Ohm cables
Also available as a pack of 10.Part No. 37574 -
Platinum Tools Bat Wing Clip Multi-Purpose Clip, 100 PCSPart No. JH960-100 -
This Platinum Tools BR1 Multi-Stripper is adjustable for stripping multiple cables, such as twisted Pair (Data) PVC & Plenum: Cat5e shielded; Cat6; Cat6 shielded; Cat6A shielded. Comes in clamshell packaging.Part No. 15041C -
This economical tool strips the cable jacket from Cat5/5e/6 twisted pair cables with professional results. Features a long life blade specifically designed to self-adjust to prevent nicks to the inner conductors. Works with cable diameters from 0.18" to 0.25" (4.5mm - 6.3mm).Part No. 15015C -
Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)Part No. 202044J -
This Platinum Tools Double Ended Coaxial Stripper will strip a broad range of coax cables in a single step.Part No. 15020C -
These Platinum Tools Electrician's Scissors are designed for cutting through foil and wire, and can even cut through Kevlar. These scissors will cut solid wire up to 16 AWG, and stranded wire up to 12 AWG. These scissors also feature stripping notches for 19 & 23 AWG wire.Part No. 10517C -
Two pack of replacement blades specifically for the EXO-EX Die([part]100061C[/part]). A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.Part No. 100071BL -
Platinum Tools patented EXO-EX Die is used with the EXO Crimp Frame([part]100061C[/part]) to terminate ezEX-RJ45 connectors (typically used in Cat6 and Cat6a). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45 connectors (ezEX44 and ezEX48). The ezEX-RJ45 connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.Part No. 100071C -
Platinum Tools EXO-RJ45 Ethernet Crimp ToolPart No. 100061C -
The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].Part No. 100003C -
The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details- Max Cable Outer Diameter: 0.275” (6.98mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 100009C -
The Platinum Tools EZ-RJ45 cat5e crimp connectors are a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].Part No. 100010C -
The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details- Max Cable Outer Diameter: 0.275” (6.98mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 105004 -
The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202036J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool [part]100054C[/part] to trim the end. The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202016J -
Replacement blade specifically for the EZ-RJ45 Die. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.Part No. 100072BL -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an external ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202022J -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an internal ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202020J -
The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.Part No. 100021C -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details- For use with CAT5e/6+ shielded cable
- For solid round or stranded wire cables.
- Max Cable OD: 7.11mm (0.280")
- Max Insulated wire OD: 1.016mm (0.040")
- UL Rated, FCC compliant
- TAA Compliant
Part No. 105022 -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details- EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
- Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
- For solid round or stranded wire cables.
- Made in the USA
- TAA Compliant
Part No. 105020 -
The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.Part No. 100023C -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)Part No. 202051J -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
- Max Outer Diameter: 0.305” (7.75mm)
- Solid or Stranded 23-22 AWG
- 50 micron gold plated contacts
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105029 -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 - 1.22mm)Part No. 202052J -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.305” (7.75mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105028 -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame and EXO-EX Die (100061C). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.028” (7.1mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105027 -
Platinum Tools ezEX-RJ45 shielded connectors with internal ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part] This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.280"(7.1mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (0.99 - 1.12mm)Part No. 202050J -
This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100028C -
Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)Part No. 202048J -
Get your cables together the quick and professional way with Platinum Tools Heavy Duty Cable Tie Gun. This tool works with both standard and heavy duty cable ties, giving you a tailored look every time. Comes in clamshell packaging.Part No. 10200C -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
This Platinum Tools PRO 6-in-1 Screwdriver is designed to be used for extended periods of time without causing hand fatigue. Multiple bits: Phillips: 1,2, Slotted: 3/16, Nut Drivers 1/4.Part No. 19002C -
This Platinum Tools Pro Drywall Saw has teeth that are precision ground for fast and effortless cutting in both directions, push and pull. This saw is ideal for cutting drywall, plaster board, plastic paneling, plywood, wallboard and ceiling tile.Part No. 10711C -
Platinum Tools PRO Universal Crimp Tool -
Platinum Tools Pro-Strike Punchdown Tool w/ 66 110 Blades is designed for all telecom and datacom installers working with 110, 66, Krone and BIX style cross connects. This punchdown tool will also terminate and trim wires in 110 & 630 style wall jack modules.Part No. 13157C -
This Platinum Tools PRO-Strike Punchdown Tool will provide precise and reliable terminations that will ensure that your installations pass certification the first time, every time. Comes in clamshell packaging.Part No. 13156C -
This Platinum Tools PRO-Strike Punchdown Tool w/Combo Blade at is designed for all telecom and datacom installers working with 110, 66, Krone and BIX style cross connects. For use with: Coax CCS, Coax, CAT5E UTP/STP, CAT6 UTP/STP, CAT6A UTP/STP, Shipboard, Battery, Messenger, Antenna, DBS, Drop, Ground.Part No. 13159C -
Ideal for electrical, telephone and datacom projects and applications. These scissors easily cut 12 AWG stranded wire, 16 AWG solid wire, and kevlar such as that found in fiber optic cable. The blade is notched for stripping 19 to 23 AWG wire and features a serrated edge for cleaning binding posts and wire.Part No. 10525C -
This Platinum Tools ProStrip 10/20 Wire Stripper is color-coded for quick identification and delivers reliable results. The tools can be used left or right handed - wire sizes are marked on both sides. Curved cutting blades ensure cleaner, precise cuts. Comes in clamshell packaging.Part No. 15003C -
This Platinum Tools ProStrip 16/30 Wire Stripper will cut and strip 16-30 AWG solid and 18-32 AWG stranded, as well as cutting and chasing threads on a 16/32 & 8/32 bolt.Part No. 15005C -
This Platinum Tools Replacement Blade Cassette for PN 15041C is a cable and wire stripper/cutter, and works with most cable types/sizes. Comes with clamshell packaging.Part No. 15042C -
The primary tool for all telecom and network installers working with RJ45, RJ11, RJ12 & RJ22(Handset) modular plugs. Three crimp cavities for 4, 6 & 8 position modular plugs. Rugged PVC handles and all steel frame with rust resistant oxide finish will ensure years of usability. Built-in cable strippers for both flat cable and round cable help to make this a great all-in-one tool for the professional telecom or network installer and the ease of use is great for the DIYer in your life.Part No. 12503C
