-
Corning 95-000-40 Unicam Standard-performance Connector, SC, 62.5/125 um Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige Boot -
Pack of 16 - Cable Clamp Pro - Small - Black/Yellow -
Hospital Grade Green Dot Power Cord, NEMA 5-20P to C19, 12AWG, 20 Amp, Black, 6 foot -
Jonard Tools Wire & Kevlar Cutting Shears - JIC-186 -
LC/UPC to SCOM4 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Multimode 50/125 10Gbit, Aqua Jacket, 10 Meter (33 foot) -
- DVI-D Dual Link Cable
- Ideal for use as an LCD monitor cable or DVI projector cable
- Dual Link connection supports resolutions of up to 2560 x 1600
- Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
- 10 Year Warranty
Just one of our huge range of DVI cables and DVI leads, which also includes DVI-I cables with analog support.Part No. 41291 -
Write-Once-Read-Many commercial grade memory cards are specifically built for applications where data reliability and safety are paramount. A unalterable, non-rewritable, and non-erasable solution that ensures data integrity within the WORM SD/MicroSD cards. FLEXXON WORM card comes in Default WORM card mode that do not require activation of any software application. -
- Prevent people interfering with SD ports
- Physically blocks access to a SD card slots
- Consists of 4 locks and 1 key
- Each key only works with a lock of the same color
- Also available as a pack of 10 (without key)
With this neat little device, system administrators can physically prevent users from inserting SD cards and other SD Devices to their computers to copy data, introduce viruses etc.
The SD Port Blocker is made up of a combined 'key' and 'lock' assembly which plugs into the SD Card. To use, simply plug the 'keylock' into the card slot and release the latch - the lock remains in place! Plug the key back into the lock to remove.
Note - These Blockers are only affective with recessed SD ports.
" -
This Platinum Tools CCS-6 Cable Cutter is designed to cut coax cables with steel center conductors, while easily cutting through solid copper and aluminum cable too. Comes in clamshell packaging.Part No. 10514C -
These Platinum Tools Electrician's Scissors are designed for cutting through foil and wire, and can even cut through Kevlar. These scissors will cut solid wire up to 16 AWG, and stranded wire up to 12 AWG. These scissors also feature stripping notches for 19 & 23 AWG wire.Part No. 10517C -
This 25 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20225 -
This is a 25 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04225-16 -
Cat5e Ethernet cables of the 100 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-121HD -
Cat5e Ethernet cables of the 100 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a black UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-122HD -
Cat5e Ethernet cables of the 100 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a purple UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-141HD -
Cat5e Ethernet cables of the 100 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a yellow UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-181HD -
Cat5e Ethernet cables of the 100 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-191HD -
This 15-foot Category 8.1 cable, Class I channel, features a black PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-52215 -
This 15-foot Category 8.1 cable, Class I channel, features a purple PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-54115 -
This 15-foot Category 8.1 cable, Class I channel, features a blue PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-56115 -
This 15-foot Category 8.1 cable, Class I channel, features a red PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-57115 -
This 15-foot Category 8.1 cable, Class I channel, features a yellow PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-58115 -
This 15-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-59115 -
This Aqua Blue jacketed 30 meter (~98 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31030 -
RG6 F-PIN Compression Connector Purple Band 25pcs-bag<-p>.
These RG6 F-PIN Compression Connectors will create a seamless connection for your satellite or cable TV. This part comes with ten pieces per bag and are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network.<-p>
Part No. 31X4-31325 -
AB 2 Way Telephone Network Switch Box, RJ45 Female. This 2 Way RJ45 AB Switch Box will allow you to switch between two different telephone network devices on one jack.Part No. 40R2-01602 -
USB 2.0 Active Extension Cable, High Speed USB Type A Male to Type A Female, Blue, 5 meter (16.5 foot)Part No. UC-502BL -
Black NEMA 6-20P TO IEC-60320-C13, 14/3, 15 Amp, UL Listed, SJT, 15 footPart No. 10W2-01515 -
USB 3.0 to RJ45 10/100/1000 Gigabit Ethernet Adapter -
Comzon® Surge Protector w/2 USB ports(2.4 Amp), Flat Rotating Plug, 6 Outlet, White Horizontal Outlets, Plastic, Power Cord 6 foot -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 40 meter (131.2 ft) -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 3m
- 10 year warranty
Part No. 30757 -
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 3m
- 10 year warranty
-
- USB 3.0 Type A connector to Type B connector
- Suitable for data transfer rates of up to 5.0 Gbit/s
- Superspeed USB 3.0 cable: Double-shielded, type-approved to 5.0 Gbit/s.
- LINDY Design, transparent with red anti-kink protection
- Color: transparent
- Lengths from 0.5 m to 5 m
- Note: This USB 3.0 Type B connector is not compatible with USB 2.0 Type B connections
Part No. 31838 -
USB 3.0 Type A Male to Type A Female. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, design approval, to 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 3m. Note: This USB 3.0 cable is compatible with USB 2.0 and can also be used as USB 2.0 extension.Part No. 31880 -
- 2 x 6 Pin Mini DIN Male & 1 x HD15 Male to 2 x 6 Pin Mini DIN Male & 1 x HD15 Male
- PS/2 connectors are PC99 Color coded
- Innovative locking method
- Reduces cable clutter and tangle
- For use with any PC or CPU Switch using standard connectors
- Reduces the number of cables required by a third making the final solution neat and tidy
- Especially suited to CPU Switch applications e.g. 16 Port CPU Switch which requires 48 cables in total only requires 16 KVM combined cables
- Mouse and keyboard connectors are clearly marked at each end to avoid confusion
- High quality triple shielded S-VGA video cable for optimal video performance
- 10 year warranty
Please Note: This cable is not for use with 32822, 32823, 32828Part No. 33714 -
- High-performance AV cable can be used as a hi-fi interconnect or coaxial digital (SPDIF) connection cable
- Delivers superb clarity, definition and detail
- Connectors: Phono Male to Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37512 -
- High-performance video cable for use with VCRs, TVs, DVD players etc.
- Delivers superb clarity, definition and detail
- Connectors: 3 x Phono Male to 3 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37530 -
- Allows two VGA monitors to be connected to a single DVI output
- DVI Male to 2 x VGA Female
- Designed for short range desktop installations of up to 10m; for longer distances we recommend you use our VGA video splitter boxes
- Gold plated connectors
- Overall length: 28cm
Part No. 41051 -
- 3.7mm flat HDMI cable for neat installation along walls, under carpets and behind equipment
- Gold Plated connectors for maximum signal integrity, long term performance and reliability
- Shielded cable design uses the highest quality copper for perfect image and sound reproduction
- HDMI Standard certified to perform at speeds of 75Mhz or up to 2.25Gbps
- Fully tested to support resolutions up to 1080p
- 10 year warranty
Part No. 41163 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports High Speed resolutions up to 4 x higher than 1080p
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41401 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports resolutions up to 4 x higher than 1080p
- HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p60 and 4K 3D
- Full support for HEC, ARC and CEC compliant devices
- Deep color capable - supports over 1 billion colors; x.v.color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
The CROMO® High Speed HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations. It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.Please note: These cables are directional from Misco HDMI to HDMI
" -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth: 2.7Gbps per lane (total10.8Gbps)
- 10 year warranty
Part No. 41551 -
- Stylish miniature 4 port USB 2.0 Hub with integrated cable
- Space saving design - ideal for use with desktop and notebook computers
- Easy "Plug & Play" installation and operation
- 4 downstream ports with automatic connectivity and speed detection
- Bus powered from the computer, or self powered using an optional power supply
- Compatible with all USB 2.0 and USB 1.1 enabled computers and devices
- Dimensions: 40 x 70 x 25mm (WxDxH)
If you have a USB 1.1 interface in your PC or Mac, this hub is fully backwards compatible, allowing you to use your existing peripherals whilst remaining 'future proof' when you upgrade to a high speed USB 2.0 interface.Part No. 42998 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
Write-Once-Read-Many commercial grade memory cards are specifically built for applications where data reliability and safety are paramount. A unalterable, non-rewritable, and non-erasable solution that ensures data integrity within the WORM SD/MicroSD cards. FLEXXON WORM card comes in Default WORM card mode that do not require activation of any software application.
-
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Vista, Linux
Part No. 51265
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
