web analytics

    • Bus Type: PCIe (2.5Gbit/sec)
    • Speed: SATA II (3Gbit/sec)
    • Internal Connector: 1 x SATA Female
    • External Connector: 1 x eSATA Female
    • Port Multiplier and Native Command Queuing support
    • Supports RAID levels 0, 1, 0+1, 5 and JBOD
    • Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
    Part No. 51171
    • 4mm super thin cable construction with highly flexible outer jacket
    • Contains active electronics to amplify the HDMI signal for transmission over slimmer cable
    • Low profile, slimline HDMI connectors for easy access to recessed ports
    • ATC (Authorised Test center) certified for High Speed HDMI with Ethernet
    • Shielded cable construction for optimum RF and EMI protection
    • Supports resolutions up to 1080p and higher, multi channel audio
    • 3D over HDMI ready
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • 2 year warranty
    Part No. 41661
    • Dual Link digital connection supports display resolutions of up to 2560 x 1600 (QXGA) & 1080p 
    • Ideal for use as an LCD monitor cable or DVI projector cable
    • RF-BLOK shielding design
    • Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
    • 10 Year Warranty

     

    Features of the RF-BLOK shielded design:

     

    • Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

     

    • Increased insulation resistance up to 25%

     

    • No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux

     

    • Tight fit of internal wires as there is no inner mould

     

    • No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

     

    • Smaller overall dimensions which allows more room behind the host or peripheral

     

    • Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

     

    "
  • This Platinum Tools Pro Drywall Saw has teeth that are precision ground for fast and effortless cutting in both directions, push and pull. This saw is ideal for cutting drywall, plaster board, plastic paneling, plywood, wallboard and ceiling tile.
    Part No. 10711C
  • Our 50 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03250
  • This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 50 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-29150
  • Our 15 foot black Slim HD15 video cable, more commonly referred to as a SVGA male to male cable, is typically used to connect a computer to a computer monitor. This specific cable is a slim version, composed of 32 AWG (American Wire Gauge) coaxial wires, which is easier to route and manage. Ferrite Cores are small magnetic cores wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. Slim SVGA Monitor Cables are smaller diameter than normal SVGA cables. Slim SVGA Cables also have a smaller hood and ferrite's to fit where other SVGA Cables will not. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.
    Part No. 10H1-11115
  • This black 1 foot HD15 (SVGA) Male to BNC (5 Male) Breakout cable is used for connecting a PC to a monitor that utilizes BNC connectors. Our cable features a molded boot, a ferrite bead, and double-shielding to insure minimal signal loss and reduce interference.
    Part No. 10H1-18101BK
  • This 15 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.
    Part No. 10H1-20215
  • This 15 foot Mini Displayport to DVI cable will allow you to connect a DVI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses DVI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.
    Part No. 10H1-62215
  • This 15 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.
    Part No. 10H1-64115
  • Our 5 meter (16.5 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 5 meters, longer lengths will require our thicker 24 gauge cable or an amplifier: Part # 41H1-144DV.
    Part No. 10V2-05305BK-F
  • The RedMere chipset featured in these ultra-thin cables allows full transmission of 4K video at refresh rates up to 30Hz in a much more slender package. This thin HDMI cable has a much tighter bend radius than a standard cable permitting access to tighter spaces and/or facilitating a cleaner more professional installation. This cable is an excellent option for anyone looking to push a beautiful picture to their displays while reducing cable clutter. Road warriors, installers, and vacationers alike will appreciate how much less luggage and storage space these RedMere enabled HDMI cords take in comparison to the thick cables of yesteryear. Specifications
    • Max Resolution: 4K @ 30Hz
    • HDCP 2.2 Compliant
    • Supports ARC(audio return channel)
    • Directional cable with clearly labeled connectors
    • Cable OD: 3.6 mm
    • 36 AWG
    • Length: 3 feet
    • Color: Black
    Part No. 10V3-48103
  • This is a black 10 foot heavy duty power extension cable. This power cable features the NEMA 5/15P (male / standard three prong) power plug to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 14 AWG (American Wire Gauge) pure copper conductor transfers maximum power. This cable operates on 125 volts / 15 Amp power with a max of 300 volts. Operating temperature is 105C/221F.
    Part No. 10W2-02110
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-02150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-02250
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-03150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-05150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-06150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-07150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-08150
  • Cat6a Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.
    Part No. 13X6-09150
  • This Platinum Tools ProStrip 16/30 Wire Stripper will cut and strip 16-30 AWG solid and 18-32 AWG stranded, as well as cutting and chasing threads on a 16/32 & 8/32 bolt.
    Part No. 15005C
  • This Platinum Tools 8-in-1 Ratcheted Stubby Screwdriver fits perfectly in small, cramped spaces. This screwdriver features a six piece bit storage unit built directly into the handle, allowing you to simply unscrew the top cap and swap bits out as needed. Bits Included: Phillips 1, 2 and 3, Slotted 3/16", 1/4", Torx T15, T20 Nut Driver 1/4".
    Part No. 19120C
  • This 20 meter (~65 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. LCLC-11120
  • This Aqua Blue jacketed 10 meter (~33 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. LCSC-31010
  • This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)
    Part No. SCST-01210
  • Surge Protector, 6 Outlet, Gray, Vertical Outlets, 3 MOV, 540 Joules, EMI / RFI, Power Cord 6 foot. Gray, 6 Outlet, Plastic Surge Strip with Vertical Outlets. Designed for safety and protection, this 6-Outlet Surge Strip has been factory tested and UL listed. The built-in circuit breaker prevents overloading of the power strip. All outlets are grounded to protect you, your home and your equipment. This model features 3 MOV, 540 Joules, EMI / RFI protection. This model has a 6ft power cord.
    Part No. 51W1-01206
  • Surge Protector, Flat Rotating Plug, 6 Outlet, Black Horizontal Outlets, Plastic, Power Cord 6 foot. These black Surge Protectors have 6 horizontal outlets and feature a flat 360 degree rotating plug which will provide more flexibility when selecting a wall outlet. Now you can plug in behind furniture and get around other obstacles with ease. This model has a 6 foot power cord. Our 6-Outlet Power Strips are UL listed, factory tested and designed for safety. The built-in circuit breaker prevents overloading of the power strip. All outlets are grounded to protect you, your home and your equipment. Electrical Rating: 125 Volts AC. 15 Amps. 1800 Watts. Max Surge Voltage: 6KV. Max Surge Dissipation: 180 joules. Max Spike Current: 12000 Amps. Clamping Response Time: Less than 1 nanosecond. Temperature Range: -40 C to +80 C.
    Part No. 51W1-12206
  • Surge Protector, Flat Rotating Plug, 6 Outlet, Gray Horizontal Outlets, Plastic, Power Cord 6 foot. These gray Surge Protectors have 6 horizontal outlets and feature a flat 360 degree rotating plug which will provide more flexibility when selecting a wall outlet. Now you can plug in behind furniture and get around other obstacles with ease. This model has a 6 foot power cord. Our 6-Outlet Power Strips are UL listed, factory tested and designed for safety. The built-in circuit breaker prevents overloading of the power strip. All outlets are grounded to protect you, your home and your equipment. Electrical Rating: 125 Volts AC. 15 Amps. 1800 Watts. Max Surge Voltage: 6KV. Max Surge Dissipation: 180 joules. Max Spike Current: 12000 Amps. Clamping Response Time: Less than 1 nanosecond. Temperature Range: -40 C to +80 C.
    Part No. 51W1-19206
  • Universal Wire Minder J Hook. Universal Wire Minders are the perfect add-on to any racking system. This adaptive design allows it to be mounted in eight different positions. Universal Wire Minders have a generous 1.5 inch by 3 inch opening that allows even the largest cables to be managed with ease. Whether it is being added to an existing rack, or being installed into a new rack, Universal Wire Minders are the most functional cable manager. Easily install the Universal Wire Minder in any 2-post rack, 4-post rack, wallmount rack, or cabinet.
    Part No. 61CR-05100
  • Travel Wall outlet adapter with 1 AC port and 2 USB ports(2.1 A)
    Part No. 50W1-30110
  • Ultra High-Speed HDMI Cable, 48 Gbps, 4K120 / 8K60 / 10K, HDMI-A Male to HDMI-A Male, 3 meter (~9.8ft)
    Part No. 10V4-41110
  • 6 Strand Fiber Pigtail, OM2 - 50/125, Multmode Black Boot SC/PC connectors, 3 meter
  • 6 Strand Fiber Distribution Pigtail, Singlemode, LC/UPC Connectors, Blue Boots, 3 meter(1m 900um fanout + 2m distribution tail)
  • HDMI Cable, High Speed with Ethernet, HDMI-A male to HDMI-A male, 4K @ 60Hz, 28 AWG, 25 foot
  • 6 Strand fiber distribution pigtail, 9/125 Singlemode(Green Boot), LC/APC 3 meters
  • Armored Cat6a Copper Ethernet Cable, Anti-Rodent, 10 Gigabit, 24AWG, POE Compliant, 500MHz, POE Compliant, 5 foot
  • Universal Portable Power Bank, 5000mah, 2.1AMP USB-A & C, Black
  • Bluetooth Wireless Earbuds w/ Charging Case, Black
  • Bluetooth Wireless Earbuds w/ Charging Case, White
  • LC/UPC to ST/UPC OM3 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Multimode 50/125, Aqua Jacket, Beige LC Connector, Red/Black Boot ST, 10 meter (33 ft)
  • LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Magenta Jacket, Beige Connector, 8 meter (26.2 ft)
  • Premium LC Simplex Single-Mode OS2 9/125 Prepolished Field-Installable Mechanical Fiber Optic Connector for 250/900micron Distribution Cable, Blue
    • 2 x 6 Pin Mini DIN Male & 1 x HD15 Male to 2 x 6 Pin Mini DIN Male & 1 x HD15 Male
    • PS/2 connectors are PC99 Color coded
    • Innovative locking method
    • Reduces cable clutter and tangle
    • For use with any PC or CPU Switch using standard connectors
    • Reduces the number of cables required by a third making the final solution neat and tidy
    • Especially suited to CPU Switch applications e.g. 16 Port CPU Switch which requires 48 cables in total only requires 16 KVM combined cables
    • Mouse and keyboard connectors are clearly marked at each end to avoid confusion
    • High quality triple shielded S-VGA video cable for optimal video performance
    • 10 year warranty

    Please Note: This cable is not for use with 32822, 32823, 32828
    "
    • Gold plated HDMI to Micro HDMI connectors
    • 4mm super thin cable construction with highly flexible outer jacket
    • Contains active electronics to amplify the HDMI signal for transmission over slimmer cable
    • Low profile, slimline HDMI connectors provide easy access to recessed ports
    • ATC (Authorised Test center) certified for High Speed HDMI with Ethernet
    • Shielded cable construction for optimum RF and EMI protection
    • Supports resolutions up to 1080p and higher, multi channel audio
    • 3D over HDMI ready
    • Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
    • 2 year warranty
    Part No. 41651
    • 5 Slots to provide access to the most popular types of memory card
      • Slot 1: Compact Flash (including CF UDMA)
      • Slot 2: Memory Stick
      • Slot 3: SD & Mini-SD
      • Slot 4: MicroSD & TransFlash
      • Slot 5: xD
    • Supports the fastest card variants such as SDHC, SDXC and CF UDMA
    • Supports maximum of SDXC or CF UDMA 64GB
    • SuperSpeed USB 3.0 data transfer rate up to 5Gbps
    • Backwards compatible with USB 2.0/1.1
    • Includes a 50cm USB 3.0 Cable
    • Dimensions: 74 x 60 x 18mm (WxDxH)
    Part No. 43150
Go to Top