Part No. 301-HD002
-
The HDMI wall plate allows you to easily route HDMI cables in from your HDMI source devices to your HDMI equipped HDTV. Featuring a mounting wall plate that will eliminate messy cables and gaping holes in the wall and provides you with a professional looking wall installation. This HDMI wall plate will fit into a standard wall mount hole, similar to an outlet or light switch. The practical design makes this wall plates an ideal solution for cable extension management. -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
Ideal for a wide variety of applications. Heat gun comes with 4 nozzles and scraping tool for paint and varnish removal, forming plastic, shrinking packaging, and more. Dual temperature switch, overheat protection, and hard plastic storage case make this a great buy.Part No. 9005-10290 -
2 Port USB Car Charger, 3.4A total. Cigarette Lighter Plug, 1x USB Type A, 1x USB Type C, White -
This is a pair of USB A ports on a bracket that you can connect to your motherboard to add additional USB ports.Part No. 31U1-02408 -
White Decora Style Duplex AC 15A 125V Outlet (2 x Nema 5-15R) Featuring Dual USB charge ports providing 4.0 Amps ( USB A Female 2 A each). Replace a duplex AC outlet with this duplex outlet with integrated dual USB2.0 Type A female ports. No need to sacrifice AC outlets to charge USB devices. Please see spec sheets for dimensions to ensure this will fit in the electrical box you have.Part No. 90W1-70100 -
DVI-D to HDMI Adapter, DVI Female to/from HDMI Male -
- Allows two VGA monitors to be connected to a single DVI output
- DVI Male to 2 x VGA Female
- Designed for short range desktop installations of up to 10m; for longer distances we recommend you use our VGA video splitter boxes
- Gold plated connectors
- Overall length: 28cm
Part No. 41051 -
- Supports DVI-D Single Link resolutions of up to 1920 x 1200 and HD resolutions up to 1080p (1920 x 1080)
- Video bandwidth up to 165MHz
- Supports transmission distances of up to 30m (15m in, 15m out) when using LINDY Premium DVI-D SLD cables (max. resolution at 30m is 1920 x 1200)
- Daisy chain support for adding extra monitors
- Plug and Play installation - no extra software required
- Connectors: Input DVI-I Female; Output 8 x DVI-I Female
- Compact size: 240 x 103 x 29mm (WxDxH)
- Robust metal housing
- 2 Port & 4 Port versions also available
The LINDY DVI Video Splitter allows you to connect your computer to 8 DVI-D enabled displays or projectors. It supports all DVI Digital Single Link resolutions while superb image quality is maintained throughout, even when splitting the video signal to multiple monitors. There is also IC amplifier support for each individual output port.For even more monitor displays you can easily cascade multiple video splitters together. The LINDY DVI Video Splitter is the ideal solution for presentation, training, advertising and classroom use.NOTE: Connectors: Input DVI-I Female; Output 2 x DVI-I Female (DVI-I cables can be used for connections, but digital signals only are supported, analog signals are not supported!)Package Contents- 8 Port DVI-D Video Splitter
- 5V DC AC Multi Country Switching PSU
- LINDY Manual
Part No. 38108 -
This device will convert a DVI-A connection to a VGA monitor cable connection for monitors and computers that require it. DVI-D can not convert to VGA. Only DVI-A can be converted into VGA.Part No. 30DV-05300 -
This device will convert a DVI-I connection to a VGA monitor cable connection for monitors and computers that require it. DVI-D can not convert to VGA. Only DVI-I can be converted into VGA.Part No. 30DV-05200 -
- Compact moulded plastic construction
- DVI-D Male to DVI-I Female
- Gold plated connectors
- Dimensions: 42 x 27 x 16mm (WxDxH)
- Color: Black
- 10 Year warranty
-
This female DVI-I gender changer will extend your DVI-I cable, and is a female to female connector. This adapter can also be used as an extender to connect two DVI-I cables together.Part No. 30DV-00410 -
This adapter will change the gender of a DVI cable or can be used as an extender to connect two DVI cables together.Part No. 30DV-00400 -
- Compact moulded plastic construction
- DVI-I Male to DVI-I Female
- Gold plated connectors
- Gold plated contacts
- Dimensions: 42 x 27 x 16mm (WxDxH)
- Color: Black
- 10 Year warranty
-
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Black -
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Gold -
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Silver -
Easy Mount Recessed Low Voltage Cable Plate, Black<-p>.
Our black Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-BK -
Easy Mount Recessed Low Voltage Cable Plate, Lite Almond<-p>.
Our lite almond Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-LA -
Easy Mount Recessed Low Voltage Cable Plate, White<-p>.
Our white Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-WH -
- Continuously emulates EDID information
- Uses cloned data or, when this is not available, the stored preset screen resolutions (see Technical Information)
- Supports 4K monitors after the monitor data has been copied into the emulator adapter (No.32103) using the programming device (No.32100). *Supplied after July 2015, including the blue HDMI programming adapter.
- Powered via your computer's graphics card
- 2 Year warranty
Part No. 32103 -
- Continuously emulates EDID/DDC information
- Uses cloned data or, when this is not available, the stored preset screen resolutions
- Supports Dual Page DDC
- Powered via your computer's graphics card
- Dimensions: 38 x 40 x 15mm (WxDxH)
- 2 Year warranty
Please Note: The cloning feature requires this product to be used in conjunction with the LINDYEDID/DDC EmulatorPart No. 32102 -
- Push button operation directly clones the EDID/DDC data of any connected VGA monitor
- Uses cloned data or, when this is not available, the stored preset screen resolutions
- Continuously emulates EDID/DDC information
- Supports Dual Page DDC
- Can be powered from the video port, via a built-in USB pass through port, or using an optional external power adapter
- Dimensions: 80 x 44 x 22mm (WxDxH)
- 2 Year warranty
" -
- eSATA 7 Pin Male to eSATA 7 Pin Male
- Supports SATA II speeds of up to 3Gbit/sec
Part No. 33479 -
- eSATA 7 Pin Male to eSATA 7 Pin Male
- Supports SATA II speeds of up to 3Gbit/sec
Part No. 33481 -
- eSATAp Male to eSATA Male + USB Type Mini B Male connector + 1.3mm 5V Mini DC jack
- Supports SATA II speeds of up to 3Gbit/sec
- Supports USB speeds of up to 480Mbps
- Supports 5V DC 500mA from a standard USB port
- Color: Black
- Length: 0.5m
- 10 Year warranty
Part No. 33654 -
- eSATAp Male to eSATA Male + USB Type Mini B Male connector + 1.3mm 5V Mini DC jack
- Supports SATA II speeds of up to 3Gbit/sec
- Supports USB speeds of up to 480Mbps
- Supports 5V DC 500mA from a standard USB port
- Color: Black
- Length: 1m
- 10 Year warranty
Part No. 33655 -
Ethernet to Single Mode Fiber Optic Converter, RJ45 (100Base-TX) to Fiber-SC (100Base-FX) 20km.The 71F1-112SC SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The 71F1-112SC is able to operate in temperatures from -10 up to 55 Celsius. The converter can be used as a standalone unit or as a module.
Features- Transfers data from 10/100Base-TX copper to fiber interfaces
- Single-mode fiber with SC connector for transmission of up to 20km
- Built-in LFP (Link Fault Pass-through) (LLCF/LLR) Technology
- IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
- Dip switches for customized configuration
- Supports low-time lag transmission
- Supports the transmission of extra-long packets up to 1.6KB
- -10C to 55C operating temperature range
Part No. 71F1-112SC -
This adapter is designed to convert an HPDB68 connection into an HPDB50 connection. This is an external SCSI adapter.Part No. 30P2-26200 -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202003J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202010J -
This product is used in conjunction with the Platinum Tools EXO crimp tool frame [part]100061C[/part]. This replacement die is for use with the Platinum Tools EZ-RJ45 product line of crimp connectors.Part No. 100072C -
This crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45 Connector in one simple operation. The ratcheted straight action crimping motion ensures a uniform crimp every cycle. This tool features precision cast crimping dies for superior accuracy. The all-steel frame has a rust-resistant black oxide finish. For use with all EZ-RJ45 Cat5e & Cat6 Connectors.Part No. 100004C -
The EZ-RJPRO Heavy Duty Crimp Tool is designed to make a professional installer's life a little easier. This tool has a built-in wire cutter, which helps ensure correct wire lengths while being assured that every termination will meet FCC specifications. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on conductors and pair separating splines. For use with all EZ-RJ45 Cat5e & Cat6 connectors.Part No. 100054C -
These are replacement cutting blades for the regular EZ-RJ45 Crimp Tool part 100054C. This pack includes two blades.Part No. 100004BL -
This is the replacement blade set for EZ-RJ PRO HD Crimp Tool part 100054C. You get one set for RJ45 (Ethernet) and 1 set for RJ11/12 (Telephone). The package includes two under-guard blades, one RJ45 blade, and one RJ11/12 blade.Part No. 100054BL -
Platinum Tools ezEX-RJ45 Shielded Cat6/Cat5e Crimp Connectors, internal ground, POE Compliant, Jar 50 pieces -
This adapter will take an RCA video cable and convert it to a RF type. This device works with whatever connector configuration you choose.Part No. 30X3-03220 -
- 40 x 40mm with 2 Pin IDC type connector with 30cm cable
- Replacement fan for Premium HDD Caddies Part No's 20950, 20951, 20653, 20956, 20957 & 20958
Part No. 73631 -
Fast USB PD 20 watt & QC3 18 watt Car Charger, Type-C and A ports (C2055) -
Fast USB PD 33 watt & QC3 18 watt Wall Charger Type-C and A ports (C2054) -
This is a female DC power connector to a 2 pin terminal adapter. This works with DC male power to a 2 screw terminal from the power source.Part No. 30W1-00210 -
This adapter will convert a TV-style F-Pin (Coax) cable end into a BNC cable end. This adapter is nickel plated.Part No. 30X3-03100 -
This adapter will convert a male TV-style F-Pin (Coax) cable end into an female RCA video cable end.Part No. 30X3-03120 -
Fiber Distribution Panel Plate with 6 Aqua OM3 LC/UPC Duplex Ports, Multimode -
Fiber Distribution Panel Plate with 6 Green SC/APC Duplex Ports, Single Mode
