-
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 14 inch cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02301Y
-
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 36 inch(3 foot) cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02303Y
-
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 6 foot) cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02306Y
-
This is a 10 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable features a thicker, 16 awg wire that is capable of 13 amps. This cable is UL listedPart No. 10W1-01210-16Y
-
This is a 3 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable is UL listed and has a 13 Amp rating.Part No. 10W1-01203-16Y
-
This is a 6 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable features a thicker, 16 awg wire that is capable of 13 amps. This cable is UL listedPart No. 10W1-01206-16Y
-
The LINDY Console Switch provides a flexible way to use one or more computers from up to 4 different consoles, located in different places. Depending on how it is connected, it can be used to drive up to four video displays (video splitting) or allow up to four consoles to access a KVM switch or computer (resource sharing).The LINDY Console Switch supports a wide 280MHz bandwidth, for very high screen resolutions of up to 1900 x 1440 (with standard cables). When long cable runs (of up to 30m) are required, the LINDY Console Switch features a video boost option to ensure that picture quality repower crisp.Thanks to smart power control, the use of the supplied external power supply is optional for most applications. This can be handy when spare power sockets are not close at hand.The LINDY Console Switch uses standard PS/2 and VGA connectors throughout for quick and easy connection to host systems and peripherals alike.
- Versatile switch for console sharing, video splitting and resource sharing applications
- Fully automated sharing / switching on a timeout basis
- Allows a single video feed to be simultaneously displayed on up to four monitors
- Supports display resolutions of up to 1900 x 1440
- Flash upgradeable
Part No. 39123 -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF
-
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF
-
This black 14 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-722SF
-
- 3.5mm Stereo Jack Male to 3.5mm Stereo Jack Male
- Low profile gold plated connectors
- High quality, highly flexible cable
- color: Anthracite
- RoHS/REACH compliant; PVC and halogen free design
- 10 year warranty
Part No. 35304 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports resolutions up to 4 x higher than 1080p
- HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p60 and 4K 3D
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
The LINDY CROMO High Speed HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with Sky HD, PS3, Blu-Ray, HDTV and home cinema installations. It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test center) certified for High Speed Category 2 compliance.
Part No. 41442 -
- Connect a standard HDMI cable to a Micro HDMI type port found on the latest mobile phones, cameras etc
- High quality, shielded, diecast metal HDMI adapter
- Gold plated HDMI Type A Female and Type D Male connectors
- Supports Full HD 1080p and above
- HDCP compliant
The LINDY CROMO HDMI Type A Female to Type D Male Adapter is a high quality adapter ideal for use with HDTV, home cinema and entertainment centre installations where you wish to convert a Micro HDMI port into a normal HDMI connection.
It provides premium quality construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.