Part No. 10W3-41203
-
This three foot black Power Extension Cord will extend your server's power cord to get you the length you need. Specifications: 20 Amps and 12AWG/3C. -
This 25 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-01125 -
This 35 foot black cable features a flat body (only 1.8mm thick) for running on the floor or against baseboards. Cat6 cables can support 10 / 100 / 1000Mbps. The cable has stranded 32 AWG (American Wire Gauge) conductors for greater flexibility. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots. The connectors are wired to the T568B standard. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-62235 -
This 2-foot Category 8.1 cable, Class I channel, features a gray PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-52102 -
This 2-foot Category 8.1 cable, Class I channel, features a black PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-52202 -
This 2-foot Category 8.1 cable, Class I channel, features a purple PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-54102 -
This 2-foot Category 8.1 cable, Class I channel, features a red PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-57102 -
This 2-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-59102 -
The HDMI wall plate allows you to easily route HDMI cables in from your HDMI source devices to your HDMI equipped HDTV. Featuring a mounting wall plate that will eliminate messy cables and gaping holes in the wall and provides you with a professional looking wall installation. This HDMI wall plate will fit into a standard wall mount hole, similar to an outlet or light switch. The practical design makes this wall plates an ideal solution for cable extension management.Part No. 301-HD002 -
This 5 meter (~16 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11005 -
This 8 meter (~26 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11108 -
This Aqua Blue jacketed 3 meter (~10 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. (Not for Home Theater)Part No. LCLC-31003-PL -
This Aqua Blue jacketed 7 meter (~23 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31007 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 2 meter (~6.6 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51002 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11105 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002 -
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11105 -
DisplayPort v1.4 Video Cable, 32.4 Gbit/s Data Rate, 8k@60Hz / 4k@120Hz, DisplayPort Male, 10 footPart No. 10H1-70110 -
RG59 F-pin Coaxial Cable with Gold connectors, Black, F-pin Male, 50 footPart No. 10X2-01150G -
Power Cord, C14 to C19, 14 AWG,15 Amp, Black, 6 footPart No. 10W2-32206 -
USB-C Cable, USB 3.1 Type C Male to Type C Male - 10Gbit - 2 Meter (6.56ft) -
Apple Authorized Lightning Male to 3.5mm Adapter Cable, 3 inch, Black -
Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 4 foot -
Cat6 Gray Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Cat6 Black Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Cat6 Green Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Cat6 Blue Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Cat6 Yellow Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Cat6 White Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet -
Comzon® Cat6 Blue Ethernet Patch Cable, Snagless/Molded Boot, 25 foot -
Comzon® Cat6 Black Ethernet Patch Cable, Snagless/Molded Boot, 25 foot -
Comzon® Cat6 White Ethernet Patch Cable, Snagless/Molded Boot, 25 foot -
Comzon® Cat6 Yellow Ethernet Patch Cable, Snagless/Molded Boot, 25 foot -
LC/UPC to SC/UPC OM4 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Multimode 50/125 10Gbit, Aqua Jacket, 3 meter (10 foot) -
Computer / Monitor Power Cord, Blue, NEMA 5-15P to C13, 18AWG, 10 Amp, 10 foot -
High Temperature Power Cord, C14 to C15, 14AWG, 15 Amp / 250 Volt, UL SJT, Red, 6 foot -
MIDI Cable with Double Shielding, 5mm, 5 ft -
- 2 x 6 Pin Mini DIN Male/Female & 15 Way HD Male/Female
- PS/2 connectors are PC99 Color coded
- Innovative locking method
- Reduces cable clutter and tangle
- For use with any PC or CPU Switch using standard connectors
- Reduces the number of cables required by a third making the final solution neat and tidy
- Especially suited to CPU Switch applications
- Mouse and keyboard connectors are clearly marked at each end to avoid confusion
- High quality triple shielded S-VGA video cable for optimal video performance
- 10 year warranty
Part No. 33732 -
- VGA Male to VGA Male
- Ferrite core to reduce interference for the best picture quality
- Fully moulded
- DDC (Display Data Channel) compatible
- color: Black
- 10 year warranty
The LINDY premium SVGA cables have ferrite cores to reduce interference for the best quality picture. Available in lengths from 0.25m up to 50m, all LINDY SVGA cables come with a 10 year warranty.
" -
- Crimp tool for 8 Way RJ-45 type connectors
- Integral cable cutter and stripper
Part No. 43208 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded flexible cable and additional strain relief
- Contains active electronics to amplify the HDMI signal for transmission over slimmer cable
- Ethernet support allows compatible devices to connect to the internet
- Low profile, slimline HDMI connectors for easy access to recessed ports
- Support resolutions up to 1080p and above
- Supports 3D 1080p
- Supports HDCP
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
Part No. 41673 -
- High-performance video cable for use with VCRs, TVs, DVD players etc.
- Delivers superb clarity, definition and detail
- Connectors: 3 x Phono Male to 3 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37532 -
- 68 Way Half-Pitch D Male (Clip) to 68 Way Half-Pitch D Male (Clip)
- Ultra2 LVD compliant
- Premium quality
- 10 year warranty
Part No. 30690 -
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- For use with iMac (Intel Core Duo), Macbook and 12-inch PowerBook G4
- Length: 20cm (approx)
- Color: White
- 10 year warranty
Part No. 41001 -
- 2 x LC fiber Optic Male to 2 x LC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125µm type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss, and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46237
