Part No. LCLC-11106
-
This 6 meter (~19 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater) -
This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31005 -
This 3 meter (10 feet) aqua 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41003 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11003 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11003 -
This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11105 -
This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01205 -
Black NEMA 6-20P TO IEC-60320-C19, 12/3, 20 Amp, UL Listed, SJT, 3 footPart No. 10W3-42503 -
ST/UPC 9/125 Terminator Connector Back Reflection -50dB -
USB C to 3.5mm Adapter Cable for connecting headsets, 5 inch, White -
Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 1 meter -
Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 2 meter -
Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 3 foot -
LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Magenta Jacket, Beige Connector, 3 meter (10 ft) -
Computer / Monitor Power Extension Cord, Black, C13 to C14, 14AWG,15 Amp, 6 foot -
Shielded Cat5e Black Copper Ethernet Cable, Snagless/Molded Boot, POE Compliant, 25 foot -
- Bus Type: 32 Bit PCI
- Speed: Up to 480Mbps
- Chipset: Via VT 6212L
- Silicon fuses provide protection for each port
- USB 2.0 and USB 1.1 compliant
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
- Software Compatibility: Windows ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51063 -
High quality SuperSpeed ??USB 3.0 cable with type A male to type B connector for data transfer rates up to 5,0Gbit / s LINDY design, transparent with red antikink- USB 3.0 Type A Male to Type B Male
- SuperSpeed ??USB 3.0 Cable: Double shielded, design approval, to 5,0Gbit / s.
- LINDY design, transparent with red boot.
- Color: transparent
- Lengths from 0.5m to 5m
Part No. 31839 -
- 2 x SC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m multimode fiber
- Zip twin 2.8mm
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.5db (max)
- Includes insertion loss test report
- Color: Grey
- 10 year warranty
NOTE: Picture is for illustration purposes onlyPart No. 46103 -
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- 2 x LC fiber Optic Male to 2 x LC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125µm type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss, and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46236 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port) or EPP (Enhanced Parallel Port)
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
- 3 Year Warranty
Part No. 51286 -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth: 2.7Gbps per lane (total10.8Gbps)
- 10 year warranty
Part No. 41540 -
This BNC cable helps delivery the highest quality video signal from the LINDY CCD-Camera to the LINDY Video Server. It is just under 33 feet in length" -
- Connect a DisplayPort computer to a HDMI 4K display
- Supports resolutions up to 4K (3840x2160p) at 30Hz
- For use with DisplayPort 1.1a equipped computers
- Supports Video-mirroring or Extended desktop modes
- Supports audio
- 2 years warranty
This DisplayPort to HDMI 4K Adapter allows you to connect a DisplayPort 1.1a equipped computer to a 4K HDMI monitor, TV or projector. This allows you to use your HDMI display with newer Mini DisplayPort devices. It is ideal for use in established digital entertainment centers, home offices, conference rooms or advertising displays.
Please note: For audio output to HDMI your computer must support audio output via DisplayPort. Contact your computer or graphics card manufacturer for further information.
Part No. 41728 -
- 2 x LC fiber Optic Male to 2 x ST fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss, and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46267 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30883 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports resolutions up to 4 x higher than 1080p
- HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p60 and 4K 3D
- Full support for HEC, ARC and CEC compliant devices
- Deep color capable - supports over 1 billion colors; x.v.color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
The CROMO® High Speed HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations. It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.Please note: These cables are directional from Misco HDMI to HDMI
" -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 3m
- 10 year warranty
Part No. 30787 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: "Plug & Play"
-
- Card Connector: 25 Way D Female
-
- Parallel port can be configured as SPP, BPP, ECP or EPP
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51285 -
-
- 3.7mm flat HDMI cable for neat installation along walls, under carpets and behind equipment
- Gold Plated connectors for maximum signal integrity, long term performance and reliability
- Shielded cable design uses the highest quality copper for perfect image and sound reproduction
- HDMI Standard certified to perform at speeds of 75Mhz or up to 2.25Gbps
- Fully tested to support resolutions up to 1080p
- 10 year warranty
Part No. 41163 -
This 50 foot stereo extension/patch cable is perfect for use as a patch cord extension or for extending headphones, guitars, amplifiers and more. It features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage. The ends are both 1/4 inch with one being male and the other being female.Part No. 10A1-62250 -
Our 25 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-03225 -
Our 10 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.Part No. 10D3-01210 -
This high quality 3 foot Serial extension cable has male and female DB37 ends. It features 37 conductors in a 1 to 1 pin-out, molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.Part No. 10D4-01203 -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 9 pin connector on one end and a 6 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports power/charging via FireWire.Part No. 10E3-96006BK -
This 6ft SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20106 -
This cable extends out a DisplayPort male to DisplayPort female cable by six feet. This is perfect when you need a longer length, but don't want to replace the whole cable. Just extend it out with this DisplayPort extension cable until you get it exactly where you need it.Part No. 10H1-60206 -
This 3 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.Part No. 10H1-61103 -
Our blue 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110E -
Our 2 meter (6.6 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 5 meters, longer lengths will require our thicker 24 gauge cable or an amplifier: Part # 41H1-144DV.Part No. 10V2-05302BK-F -
Our 3 meter (10 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 5 meters, longer lengths will require our thicker 24 gauge cable or an amplifier: Part # 41H1-144DV.Part No. 10V2-05303BK-F -
This is a 10ft heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord, also works for certain larger printers. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01210-16 -
This is a 25 foot standard computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01225 -
Our Hospital Grade 6 foot Green-Dot NEMA 5-15P power cord is rated for use in hospitals and other medical settings. Featuring clear connectors, you can be sure this durable power cord will hold up to the demanding needs of hospital application. This cord has three 16 AWG conductors, is rated to 13 Amps at 125 Volts and is RoHS compliant.Part No. 10W2-51306
