Part No. 13X6-62200.5
-
This 6 Inch Cat6a Black Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications. -
Our Black 6 inch Micro USB Cable is perfect for the purse or the pocket and goes well with portable battery-based chargers. It meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03100.5BK -
These black 6 inch cable ties are excellent for organizing smaller messy cable situations. They are great for organizing small clusters of network cables, car/home audio, computers and more. This particular cable tie is rated to 40 pounds and comes in a bag of 100 pieces.Part No. 30CV-00140BK -
This 6 inch Cat6a Blue Slim Ethernet Patch Cable is perfect for installations that are in a tight-spot, and require a thinner cable than the typical thick Cat6a cable. Cat6a is the fastest Ethernet cable available on the market that meets TIA/EIA standards. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss can be seen and heard. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6 specifications.Part No. 13X6-66100.5 -
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a black UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12200.5 -
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-16100.5 -
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-02200.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-06100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-02100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-05100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-03100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-04100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-07100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-09100.5 -
Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-08100.5 -
This 6 Inch Cat6a Gray Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications.Part No. 13X6-62100.5 -
This Mini Displayport to DVI adapter will allow you to connect a DVI cable into a Mini-DisplayPort compatible device. Perfect for when your display uses DVI yet your computer or laptop only has Mini-DisplayPort. This adapter does not support audio.Part No. 30H1-64000 -
This Mini Displayport to VGA adapter will allow you to connect a VGA cable into a Mini-DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has Mini-DisplayPort. This adapter does not support audio.Part No. 30H1-65000 -
This cable is perfect for hooking up your Apple laptop to VGA enabled devices, such as projectors and monitors by utilizing your mini-DVI port. Durably constructed, this cable allows you to use your mini-DVI port to output a VGA signal that is compatible with components possessing a VGA port, including televisions featuring a VGA connection. Wouldn't playing computer games, watching downloaded movies, or anything else done on your Apple laptop be even better displayed on your home monitor or HDTV? This cable will allow you to do so Mini DVI was used on the 12" PowerBook G4 with the exception of the first generation which used Mini VGA. Mac's that are newer than 2008 should have a mini Display Port.Part No. 30H1-55000 -
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09100.5 -
Cat5e Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08100.5 -
These cable ties are great for cleaning up those messes behind you computer, TV, stereo, home theater, etc.Part No. 30CV-00140 -
This 6 inch cable is designed to adapt newer PS/2-style keyboards to older DIN5 (AT) motherboard connections. Just plug the male DIN5 end into the appropriate port on your computer, and plug your PS2 keyboard into that. You can now use your newer keyboard on your older computer.Part No. 10I5-012HF -
This 6 Inch Cat6a Red Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications.Part No. 13X6-67100.5 -
3.5mm Stereo to Dual RCA Audio Adapter Cable, 3.5mm Male to Dual RCA Female (Red/White), 6 inch -
This white surface mount box is designed to house up to 2 keystones of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-3146E -
6 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, GR_409-CORE, 10 Gbit, Black, Riser Rated, Spool, 1000 foot -
- 10 pack
- Crimp type
Part No. 62202 -
- 6 Way RJ-11/RJ-12 Female to 6 Way RJ-11/RJ-12 Female
Part No. 70171 -
- RJ12 Cable 6P6C
- RJ12 Male (6 pin) to RJ12 Male (6 pin)
- Flat Cable 6 core, Connection 1:1
- Used for telecommunication connections
- 10 year warranty
The Lindy RJ12 Cable is a high-quality cable that allows users to connect telecommunication devices with a
RJ12 6/6 Port
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
The cables are packaged individually in a polybag.
RJ-12 cables are available in lengths from 2m to 50m.
" -
This is a 6-fiber orange 500 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in an orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The armor eliminates the need for a separate conduit. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. * This is not gopher cable.Part No. 13F2-206NF -
6-Fiber Ribbon/Buffer Tube Fan-Out Kit, Color Coded 36 inch Tubing Length Accepts 250um -
Outdoor mechanical timers will help you save energy and time by automating your yard/garden with our 24 hour timer. With up to 24 On/Off programs every 24-hours, you can customize your garden's lights,pool sprinkler, pumps, holiday decorations, Christmas lights, displays and much more. The timer dial uses non-removable pins to set the timer. Simply push down the pins to set your desired on time range and your timer is ready to go. This handy stake timer features receptacles for up to six devices boasting water resistance and weather proofing. Each outlet has it's own safety cover. Device supports 24 ON/OFF setting per 24 cycle in increments as small as 30 minutes. Specs:- Product Dimensions: 2 x 2 x 8 inches
- Color: Green
- Power Source: AC
- Voltage: 125 volts
- Amps : 15 A
- Max Power: 1875 watts
- Power cord Length: 6 Feet
Part No. 12W2-36106 -
Comzon® Surge Protector w/2 USB ports(2.4 Amp), Flat Rotating Plug, 6 Outlet, White Horizontal Outlets, Plastic, Power Cord 6 foot -
Comzon® Surge Protector w/2 USB ports(2.4 Amp), Flat Rotating Plug, 6 Outlet, White Horizontal Outlets, Plastic, Power Cord 10 foot
-
6-Strand SC/PC Distribution Pigtail, Multimode 50um OM3, Color Coded 900um Breakout, 3 meters -
- Connectors: 6.3mm Stereo Male to 2 x RCA/Phono Female
- 24K gold plated connectors resist tarnishing to ensure long term performance and reliability
- 10 year warranty
Part No. 35512 -
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38074 -
- Supports the following resolutions: 1080p up to 60m (40m in, 20m out); 4K up to 35m (15m in, 20m out)
- Supports total disances of up to 60m
- Supports HDMI 1.4 CAT1 signals
- Ideal for use in home cinema and professional AV installations
- Supports video, audio and HDCP signals
- No power supply required, the module takes its power from the HDMI interface
- Dimensions: 55 x 42 x 14mm (WxDxH)
Part No. 32669 -
60mm Fusion Splice Sleeves, 50 Pack -
66 Block Mounting Bracket, 89b Bridge-Over Style. This is a mounting bracket for a 66 Block, 89b bridge-over style. Mount this 66 block mounting bracket model S89b onto your backboard. Your 66 block will easily snap in, and you are ready to go.Part No. 50X1-12500 -
This punch-down block is used to connect voice and data network wiring and other telephone punch-down cabling.Part No. 50X1-02566 -
This is a 6 foot black high quality coaxial cable with gold connectors for connecting VCRs, TVs, cable, FM antennae, etc. The F connector is the most basic, standard coaxial connector found on TVs, VCRs, satellite equipment, splitters, and other television distribution equipment.Part No. 10X2-01106G -
Use this 6 foot 1/4 inch patch cable to connect stereo devices to the amplifier, such as other amplifiers, mixer boards and pre-amps. Sound Engineers setting up a studio or concert venue often use longer cables (from 10 to 20 feet) between their mixers and amplifiers on stage, and then use shorter patch cords (from a few inches to one or two feet long) to connect other devices closer to the main mixer board. This cable features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-62106 -
1/4 inch Stereo Extension Cable, TRS, 1/4 inch Male to 1/4 inch Female, 6 foot -
Our 6 foot 3.5mm stereo male to dual RCA Male (stereo) audio cable is perfect for connecting your MP3/PC to any device using right and left RCA connections. This is ideal to hook up your MP3 player/iPod to your receiver and listen to your media through the best speakers in the house.Part No. 2RCA-STE-6 -
Mini DisplayPort to DisplayPort cables meet the DisplayPort 1.2 standard, including but not limited to 8.64 Gigabit throughput. These cables have an aluminum mylar foil, braided shield and are RoHS compliant. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 8.64 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort v1.2 technology allows for up to 2560x1600 video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This Mini DisplayPort to DisplayPort cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 10.8 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort v1.2 technology allows for up to 2560x1600 video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This Mini DisplayPort to DisplayPort cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content.Part No. 10H1-62106
