These RG11 F-Pin Compression Connectors are perfect for creating a seamless, air-tight connection when terminating your satellite or cable TV cables. This bag of compression connectors will get your termination done quickly and reliably the first time. Qty 25/bag.
-
LANtest-E Wire Mapping Cable Tester, Tests Cat5e, Cat6, Cat6a, Coaxial (BNC) and Telephone runs. This LANtest-E Cable Tester will test and map wire configurations for Cat5e, Cat6, Cat6a, BNC, Telephone and 10/100/1000 BASE-T cables. The included remote unit makes testing patch panels and in-wall installations a breeze. The LANtest-E gives you quick and accurate test results the first time, every time.Part No. 31X6-08500
-
SOHOtest-E Network/Phone/TV Cable Tester, Tests Cat5e, Cat6, Cat6a, Coaxial and Telephone runs for Continuity and Wiring Map. SOHOtest-E is designed to test the most commonly used cables in a residential/home office environment. It can be used to determine wiring faults in network, phone, cable TV, and home security system cables, either before or after installation.Part No. 31X6-04500
-
These Orange Band RG6 Quad Shield F-Pin Compression Connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. These connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your satellite or cable TV connection.
Part No. 31X4-32325 -
RG6 F-PIN Compression Connector Purple Band 25pcs-bag<-p>.
These RG6 F-PIN Compression Connectors will create a seamless connection for your satellite or cable TV. This part comes with ten pieces per bag and are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network.<-p>
Part No. 31X4-31325 -
RG6 BNC Compression Connector Purple Band 25pcs-bag<-p>.
These Purple Band RG6 BNC Compression Connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. Compression connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network. This part comes with twenty five pieces per bag.<-p>
Part No. 31X4-31125 -
RG59 BNC Compression Connector Yellow Band 25pcs-bag<-p>.
These Yellow Band RG59 BNC Compression Connectors are designed fare designed to easily terminate your coax cables while creating a seamless, air-tight connection for your video surveillance or security system. Compression connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. This part comes with twenty five pieces per bag.<-p>
Part No. 31X3-31125 -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This high-speed USB 2.0 extender cable eliminates the USB length constraints and allows for extended USB connections. You can combine up to four of our 16ft. cables for a maximum length of 64ft.Part No. UC-50200
-
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C
-
Easily detect wire faults and trace unmarked network cable runs with the MapMaster Mini from Platinum Tools. A set of five wire mapping remotes is included for locating terminated runs. The built-in tone generator with four different tone combinations can be used with a tone probe to detect where a cable is routed. Key Features
- Large LCD displays TIA/EIA568A/B wire map sequence and identifies faults
- Continuity tests indentifies shorts, opens, miswires, reversals, and split pairs
- Identifies network ID-Only remotes, set of 5
- Identifies unlabeled runs
- Built-in tone generator with 4 tone cadences
- Single multi-function button operates test functions, tone generation, adn ID-Only remotes location
- Self storing remote
- Auto power off conserves battery
Part No. T-109C -
This 1-meter 62.5/125 mode conditioning fiber optic patch cable allows Gigabit 1000 Base-LX and 10GBASE-LRM routers and switches to be installed into existing multimode cable plants. This particular cable uses duplex ST connectors on the singlemode side and duplex ST connectors on the multimode side. The single mode leg is marked by a yellow jacket, this leg should always be plugged into the transmit of the single mode device in order for the connection to function. Mode conditioning fiber patch cables eliminate the effects of Differential Mode Delay (DMM) by offsetting the entry point of the singlemode laser as it enters the multimode medium.Part No. STST-12101
-
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11110
-
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11103
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11101
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11002
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11001
-
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01210
-
This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01205
-
This 4 meter (~13 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01204
-
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01203
-
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202
-
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01201
-
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11110
-
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11105
-
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11103
-
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11102
-
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11101
-
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11003
-
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002
-
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11001
-
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01210
-
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01205
-
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01202
-
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01201