Part No. LCSC-11003
-
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater) -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11103 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01203 -
LC to ST OM1 Duplex 2.0mm Fiber Optic Patch Cord, Multimode 62.5/125, Orange Jacket, Beige LC Connector, Red/Black Boot ST, 3 meter (10 ft) -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01203 -
This 3 meter (10 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 24 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-32003 -
This 3 meter (9.8 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers a MTP/APC connector on one end, and 4 duplex LC/UPC connectors on other. It features a 9/125 micron core.Part No. MPLC-21003 -
This 3 meter (10 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31003 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11003 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11103 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01203 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11103 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11003 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11103 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01203 -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
3-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0003-BK -
3-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0003-LA -
3-Gang Recessed Low Voltage Cable Plate, WhitePart No. 45-0003-WH -
Receptacle Tester for GFCI Outlets tests NEMA 5-15P sockets for correct wiring -
Power Cord Splitter, NEMA 5-15P to 3x NEMA 5-15R, 14AWG, 15 Amp, 14 inch, Black -
Power Cord Splitter, NEMA 5-15P to 3x NEMA 5-15R, 14AWG, 15 Amp, 18 inch, Black
-
2 Port USB Wall Travel Charger, 2 USB A Charging Ports, 3.1 Amps total, Black -
2 Port USB Wall Travel Charger, 2 USB A Charging Ports, 3.1 Amps total, White -
This Serial ATA cable is small and fits well inside your PC case. Adding a small cable allows more room for air flow, helping to keep your PC running cooler. This internal cable is one meter.Part No. 21SA-001M -
- Suitable for SATA & IDE 3.5″ HDDs
- Antistatic protection
- Foam padding to provide protection from vibration/shock
- Stackable
- Includes stickers for labelling
- Dimensions: 115 x 158 x 35mm
Part No. 40682 -
- 40 Way IDC Male & 5¼" Power Male to 44 Way IDC Female
Part No. 70199 -
- For installation on the front of your computer in an available 3.5″drive bay
- No driver installation required - Plug & Play
Part No. 43146 -
- 80 Way Ribbon Cable
- 3 x 40 Way IDC Female Connector
- Backwards Compatible with ATA/33/66/100
- Color: Grey
Part No. 33156 -
3.5mm Stereo Extension Cable, 3.5mm Male to 3.5mm Female, TRRS Mic Cable 12 foot -
3.5mm Stereo + Mic Extension Cable, 3.5mm TRRS Male to 3.5mm Female, TRRS Mic Cable 6 foot
-
- Audio Adapter
- Gold Plated Connectors
Part No. 35529 -
- Stereo Audio Adapter
- 3.5mm stereo jack to 2.5mm stereo jack adapter
- Gold Plated Connectors
Part No. 35534 -
- Audio Adapter
- Gold Plated Connectors
Part No. 35532 -
- Connectors: 3.5mm Stereo Male to 2 x RCA/Phono Female
- 24K gold plated connectors resist tarnishing to ensure long term performance and reliability
- 10 year warranty
Part No. 35511 -
- Audio Adapter
- Gold Plated Connectors
Part No. 35531 -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation" -
3.5mm Stereo Male / 3.5mm Stereo Male, TRRS Mic Cable, 12 ft -
3.5mm Stereo Male / 3.5mm Stereo Male, TRRS Mic Cable, 3 ft
-
3.5mm Stereo Male / 3.5mm Stereo Male, TRRS Mic Cable, 6 ft
-
This adapter will convert a 3.5mm headphone-style input into the left/right double RCA connection. This is a stereo to dual RCA audio adapter.Part No. 30S1-01300 -
This adapter is used to send a right and left channel 2 RCA into one stereo 3.5mm headphone-style jack.Part No. 30S1-01400 -
This adapter is ideal for converting a 3.5mm headphone-style male mono into a single mono RCA female mono jack.Part No. 30S1-12200 -
This adapter will extend a 3.5mm headphone-style in line of a cable. Great for using headphones farther away from a stereo device.Part No. 30ST-STFF -
This ivory raceway piece is a flat elbow (90 degree), it is designed to lay flat on the ground and bridge two straight 3/4 inch raceway runs at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R1-001IV -
This white raceway piece is a flat elbow (90 degree), it is designed to lay flat on the ground and bridge two straight 3/4 inch raceway runs at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R1-001WH -
This ivory 3/4 inch raceway piece serves as either an inside corner or a base for an up/down wall run. It allows the installer to connect two longer straight raceway sections at a corner or transition a run from the floor to the wall. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.Part No. 31R1-009IV
