Part No. MPMP-21050
-
This 50 meter (164 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor. -
This 15 meter (49.2 foot) high-quality Plenum approved fiber optic cable is 100 gigabit rated MTP / MTP (MPO). It features 24 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 24 strand MTP cable as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-22015 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31001 -
This 5 meter (16.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31005 -
This 7 meter (23.2 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31007 -
This 15 meter (49.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31015 -
This 30 meter (100 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31030 -
This 50 meter (165 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31050 -
This 1 meter (3.3 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32001 -
This 3 meter (10 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32003 -
This 7 meter (23 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32007 -
This 10 meter (33 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32010 -
This 15 meter (49.2 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32015 -
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 1 meter (3.3 foot) -
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 2 meter (6.6 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 3 meter (9.84 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 4 meter (13.1 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 5 meter (16.4 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 7 meter (22.96 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 8 meter (26.94 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 15 meter (49.2 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125, 20 meter (65.6 foot)
-
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125,30 meter (98.4 foot)
-
This convenient adapter allows you to plug two phones into one phone jack. Also great for having two phones and a fax machine in the same area where only one jack is available.Part No. PA-6P4C-3 -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area where only one jack is available.Part No. PA-6P4C-ST -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area, where only one jack is available.Part No. PA-6P6C-ST -
This coupler will connect two RCA cables together and features gold-plated ends for superior connections.Part No. RCA-FFG -
Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 1 meter (3.3 foot) -
Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 2 meter (6.6 foot)
-
Fiber Optic Cable, SC/APC, Singlemode, Simplex, 9/125, Yellow Jacket, Green Boot 3 meter (10 foot)
-
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01203 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01204 -
This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01210 -
Fiber Optic Cable, SC/APC, Singlemode OS2, Duplex, 9/125, Yellow Jacket, Green Boot, 2 meter (6.6 foot) -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11003 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11004 -
This 15 meter (~49 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11015 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11103 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11104 -
This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11110 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31001 -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31002 -
This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31005 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01203 -
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01210 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11003 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11103 -
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11110 -
Black RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-BK -
Blue RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-BL -
Gray RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-GY -
Orange RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-OR -
Purple RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-PU -
Red RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-RD -
White RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-WH -
Yellow RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-YL -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01203 -
This 4 meter (~13 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01204 -
This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01210 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11002 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11103 -
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11110 -
This 1-meter 62.5/125 mode conditioning fiber optic patch cable allows Gigabit 1000 Base-LX and 10GBASE-LRM routers and switches to be installed into existing multimode cable plants. This particular cable uses duplex ST connectors on the singlemode side and duplex ST connectors on the multimode side. The single mode leg is marked by a yellow jacket, this leg should always be plugged into the transmit of the single mode device in order for the connection to function. Mode conditioning fiber patch cables eliminate the effects of Differential Mode Delay (DMM) by offsetting the entry point of the singlemode laser as it enters the multimode medium.Part No. STST-12101 -
Easily detect wire faults and trace unmarked network cable runs with the MapMaster Mini from Platinum Tools. A set of five wire mapping remotes is included for locating terminated runs. The built-in tone generator with four different tone combinations can be used with a tone probe to detect where a cable is routed. Key Features- Large LCD displays TIA/EIA568A/B wire map sequence and identifies faults
- Continuity tests indentifies shorts, opens, miswires, reversals, and split pairs
- Identifies network ID-Only remotes, set of 5
- Identifies unlabeled runs
- Built-in tone generator with 4 tone cadences
- Single multi-function button operates test functions, tone generation, adn ID-Only remotes location
- Self storing remote
- Auto power off conserves battery
Part No. T-109C -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This high-speed USB 2.0 extender cable eliminates the USB length constraints and allows for extended USB connections. You can combine up to four of our 16ft. cables for a maximum length of 64ft.Part No. UC-50200 -
USB 2.0 High Speed Active Extension Cable, USB Type A Male to Type A Female, 50 foot -
USB 2.0 Active Extension Cable, High Speed USB Type A Male to Type A Female, Blue, 5 meter (16.5 foot)Part No. UC-502BL -
ComZon Surge Protector, Flat Rotating Plug, 6 Outlet, Black, Metal, Commercial Grade, 1 X3 MOV, EMI & RFI, Modem Protector, Power Cord 10 foot -
ComZon Flexible Foam Grip Mini Tripod for Phones, GoPro Video, DSL Cameras, & more - Black -
ComZon Tempered Glass Screen Protector for Apple iPhone 11/XR, 3D Resin Glass, full screen coverage, Pack of 3 -
ComZon® Surge Protector, 1 Outlet, 540 Joules with EMI/RFI filter -
ComZon Tempered Glass Screen Protector for Apple iPhone 12/12Pro, 3D Resin Glass, full screen coverage, Pack of 3 -
- For use with guitars, keyboards and other electric instruments
- Heavy duty metal jack plugs with gold plated inner conductor tips
- Professional grade 6mm cable with Oxygen Free Copper conductor and flexible steel spring cable relief
- 1/4" (6.3mm) Straight Jack to 1/4" (6.3mm) Right Angled Jack
- Color: Red
- Warranty: 10 Years
-
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practicing in your bedroom!Part No. 6002 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!Part No. 6009 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. This short length is ideal for use as a patch cable between rack equipment or effects pedals.Part No. 6010 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!.Part No. 6011 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!Part No. 6012 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!Part No. 6016 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!Part No. 6021 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. It's the perfect music cable for musicians of all grades whether you're a guitar hero or just practising in your bedroom!Part No. 6022 -
A high quality cable that's suitable for use with microphones and audio devices with XLR connections. Constructed from professional grade flexible 7mm balanced cable with Oxygen Free Copper conductor, it's completed with heavy duty plugs with rubber strain relief, making this cable the perfect balance between quality and value for money!LINDY XLR cables are available in lengths from 1.5m to 10mPart No. 6053 -
- Adapter which converts an XLR connection to a 6.3mm mono connection
- Tough, metal construction
- Connectors: XLR Male to 6.3mm Mono Female
- Warranty: 10 Years
Wide range of Music Cables also availablePart No. 6060 -
A high quality cable that's ideal for music equipment and other audio applications. Constructed from 20 individual copper (oxygen free) wires per braid, 0.12mm diameter and with PE (Protective Earth) conductor insulators, it's completed with 6.3mm Stereo Audio Male to 2 x Phono Male connectors and a PVC Jacket with an external diameter of 4mm, making this cable the perfect balance between quality and value for money!Part No. 6085 -
These affordable, circumaural headphones have been specifically designed to reduce the effect of external noise while enhancing bass frequency response. This provides a sophisticated and high quality sound image perfect for recording and studio monitoring use. The closed design also prevents headphone driver noise from leaking out when overdubbing vocals. They're also ideal for use as a drummer's headphone.Part No. 6115 -
For SAS and SATA 3.5″ hard drives. With support for SAS Dual Channel- For 3.5″ SAS or SATA II/1.0a hard drives of all capacities
- SAS Dual Data Channel support
- Externally by means of 2 individual SATA 7 pole sockets on the rear
- Internal: SAS Backplane connection SFF-8482 x2, two-channel, SATA-compatible
- Connectible, fitted in standard 5.25″ slot, with sufficient room for ventilation and heat dissipation
Part No. 21970 -
Part No. 20970 -
Gigabit Ethernet LC Transceiver, 1000Base-SX- LC Duplex connection, for fiber-glass/glass fiber connections up to 500m with Multimode 62.5/125µm or 50/125µm fibers
- Compatible with IEEE-802.3z Gigabit Ethernet and ANSI specifications for Fiber Channel applications
- Compatible with all Gigabit Ethernet Switches with Mini-GBIC/SFP slots, e.g. tested with LINDY Switch 25012 und 25004 , D-Link, Extreme Networks, Coretek, Finisar, Sanway, Copleynetworks, Allnet, Foxcon, Modultek, ….
Part No. 25015 -
- IEEE 802.3af compliant
- Input: 100-240V AC 50/60Hz 0.4A
- Output: 48V DC 16W (Max)
- LED indicators for Link, Activity, and Error
- Autosensing, detects when a compatible device is connected and turns on
- Protection circuit detects short circuit, overload and automatically turns off
- Uses standard RJ45 connections
- Operating distance: Up to 90m
- Operating distances may vary depending on the cable type used and the power requirements of the connected device
- Ideal for use with existing installations where additional power cables cannot be installed easily
- 2 Year warranty
Note: This POE Injector may also be used in conjunction with our POE Splitter (sold separately) for powering non POE devices such IP cameras, access points and wireless routers.Part No. 25052 -
- Connects two serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Fast Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 85 x 115 x 23mm (WxDxH)
- 2 year warranty
4 Port versionalso available, LINDY Part No. 25105Part No. 25104 -
- Connects four serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 185 x 108 x 28mm (WxDxH)
- 2 year warranty
2 Port version also available, LINDY Part No. 25104Part No. 25105 -
- 1000Base-T (copper) to 1000Base-SX/LX (fiber)
- Standards: IEEE 802.3, 802.3u, 802.3x
- Connectors: LC (fiber), RJ-45 (copper)
- fiber Type: Multi-mode
- Maximum fiber cable distance - 550m using 50/125µm multi-mode cable, 220m using 62.5/125µm multi-mode cable
- Network data transfer rate: 2000Mbps (Full-duplex)
- Auto MDI-X support for RJ-45 port connection
- Status LED for Speed, Link/Activity, Full-duplex, Power
- External power supply 5V DC, 2A
- Dimensions: 74 x 102 x 22mm (WxDxH)
-
- 1 x IEC Plug (1.5m) to 2 x IEC Sockets (0.5m)
- Fully moulded
- Approved to BS 1363/A
- Length: 2m
- Color: Black
- 10 year warranty
Part No. 30037 -
- 37 way Sub-D Male to 37 way Sub-D Female
-
- 9 Way D Female to 25 Way D Male
- Fully moulded
- 10 year warranty
-
For connection to devices with IEC refrigeration appliance connection to German/French power networkPart No. 30323 -
For extending an IEC connection to a refrigeration appliance, or for connecting a monitor to the switched IEC connection on your PC power supplyPart No. 30327 -
- 68 Way Half-Pitch D Male (Clip) to 68 Way Half-Pitch D Male (Clip)
- Ultra2 LVD compliant
- Premium quality
- 10 year warranty
Part No. 30690 -
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 0.3m
- 10 year warranty
Part No. 30784 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 2m
- 10 year warranty
Part No. 30786 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 3m
- 10 year warranty
Part No. 30787 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 4.5m
- 10 year warranty
Part No. 30788 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 7.5m
- 10 year warranty
Part No. 30789 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30870 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30873 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30874 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30875 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30877 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30880 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30881 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30882 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30883 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30885 -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
- Fully shielded cable with moulded connectors
- color: black/additional red USB plug (current only)
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.
" -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB 3.0 Micro-B
- Fully shielded cable with moulded connectors
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Micro-B connector for connecting to your device.
"
