Part No. LCLC-11002
-
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater) -
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11002 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202 -
Our 2 meter USB A to C cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any computer, laptop, wall wartt/charging block or other device which uses the older style rectangular port that is known as the USB A port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 2.0 specification.Part No. 10U2-32102 -
USB-C Cable, USB 3.1 Type C Male to Type C Male - 10Gbit - 2 Meter (6.56ft) -
2 PC to 1 USB Device, Manual Switch. USB2.0Part No. 40U1-01002 -
- Can be used with DVI or HDMI equipped high definition set top boxes, satellite receivers, DVD players, computers, HDTVs and projectors
- Supports HDTV resolutions of up to 1080p, 3D and multi-channel digital audio
- HDCP compliant for trouble-free operation
- Supports maximum cable distances of up to 20m (10m in, 10m out)
- Very neat and compact design
- 2 year warranty
Part No. 38026 -
- Connects two serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Fast Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 85 x 115 x 23mm (WxDxH)
- 2 year warranty
4 Port versionalso available, LINDY Part No. 25105Part No. 25104 -
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- Supports PCI Express Specification Revision 1.1
Serial Port:- Speed: Up to 921Kbps
- Card Connector: 2 x 9 Way D Male
Parallel Port:- Speed: Up to 15Mbps
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port) or SPP (Standard Parallel Port)
Part No. 51188 -
-
- Connectors: 2 shielded SATA Female connectors to 2 x internal SATA Male connector
-
- Length: 25cm
Please Note: The connectors used on this backplate are standard SATA connectors which have been specially shielded for use with older external SATA drive housings. They are not eSATA connectors.Part No. 33121 -
-
- Bus Type: PCIe (2.5Gbit/sec)
- Speed: SATA II (3Gbit/sec)
- Internal Connector: 1 x SATA Female
- External Connector: 1 x eSATA Female
- Port Multiplier and Native Command Queuing support
- Supports RAID levels 0, 1, 0+1, 5 and JBOD
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
Part No. 51171 -
- Bus Type: 32 Bit PCI
- Speed: Serial ATA-150
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Internal Connector: 2 x SATA Female
- Supports 2 independent Serial ATA channels
- Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
- Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
- Integrated PCI DMA engines
- RAID Function Level 0 and 1 (Mirror and Stripe Set)
- Standard and Low Profile PC Back Plates included
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51150 -
- 2 x RS422/485 Ports
- Bus Type: 32 Bit PCI Compliant
- Compliant with PCI revision 2.2 (3.3V & 5V)
- Speed: Up to 921Kbit/sec
- 256Kbyte FIFO buffer
- Plug & Play
- Automatic I/O and IRQ set-up
- ESD protection 15KV support
- Card Connector: 1 x DB25 Male to 2 x DB9 Male (via an adapter cable)
- Software Compatibility: Windows 2000/NT/XP/Vista/Windows 7/Server 2003, 2008, Linux, SCO Unix
- Supplied with standard and low profile back plates
- 2 Year warranty
Part No. 51215 -
This 2-Port Stainless Steel Wallplate with water seal is water resistant to ensure a dry installation in both wet and dirty industrial environments. A stainless steel mounting screw and O ring are included.Part No. 30X8-71002 -
2 Port USB Car Charger, 2.1 Amp + 1 Amp, White -
2 Port USB Wall Travel Charger, dual USB A female ports, 5V/2 1A output, Folding plug, White. This two port travel USB wall charger has two USB A female ports for charging two devices at the same time. The compact size and folding prongs make it essay to store in a bag for trips. The body of the charger is white. Suitable for use with tablets, mobile phones, Bluetooth speakers, and other devices with the USB interface. specifications- Output: 5 V 3.4A total(both ports)
- Size: 46 x 45 x 25 mm
- Ports: 2 USB A female
Part No. 90W1-30310WH -
- Supports display resolutions of up to 2048 x 1536
- Monitor detection via DDC2B signals
- Supports cable lengths of up to 50m using LINDY Premium Gold S-VGA cables
- Powered via the VGA ports; no separate power supply required
- Auto scan mode with adjustable scan rate (10, 20 seconds and off) automatically switches between the 2 input ports
- Remote control with 1.4m cable for convenient operation, which can be extended up to 50m using a LINDY PS/2 Extension cable
- Connections: 1 x VGA Female (output); 2 x VGA Male (input)
- Dimensions: 103 x 55 x 23mm (WxDxH)
Part No. 32585 -
This white surface mount box is designed to house up to 2 keystones of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-314DE -
2 way HDMI Amplified Splitter, HDMI High Speed with Ethernet, 4Kx2k@60Hz, HDMI v2.0, HDCP2.2, Metal Housing -
This SCART Splitter allows two devices such as a VCR, DVD player, games console etc to be connected to a single SCART input TV. Both input ports support RGB signals while a push button is used to select the desired source.- 1 SCART Male Plug to 2 SCART Female Sockets
- Supports RGB signals
- Wired for Audio/Video In/Out
- Nickel plated connectors
- Cable Length: 45cm
Part No. 35596 -
AB 2 Way Telephone Network Switch Box, RJ45 Female. This 2 Way RJ45 AB Switch Box will allow you to switch between two different telephone network devices on one jack.Part No. 40R2-01602 -
- Connects a legacy PSU to a newer SATA device
- Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
- 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
- Perfect for DIY PC builders and in-house technical teams
- 10 year warranty
The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to two newer SATA devices such as a SSD, HDD or Blu-Ray disk drive.
" -
Cable Plate with Flexible Opening, 2-Gang, BlackPart No. 45-0015-BK -
2-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0002-BK -
2-Gang Recessed Low Voltage Cable Plate, BrownPart No. 45-0002-BR -
2-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0002-LA -
Cable Plate with Flexible Opening, 2-Gang, WhitePart No. 45-0015-WH -
2-Gang Recessed Low Voltage Cable Plate, WhitePart No. 45-0002-WH -
2 Port USB Wall Travel Charger, USB C w/ USB PD 3.1A, USB A /w QC3 3.1A, 36W, White -
This will convert a 3.5mm headphone-style stereo connection into a 2.5mm male. This is perfect for connecting older devices to a 2.5mm stereo jack.Part No. 30S1-25200 -
Our 20 Meter (~65.5 feet) 10 Gigabit Aqua OM4 Fiber Optic Cable comes terminated with LC / LC connectors on both ends. This multimode fiber is designed to transmit information over long distances with increased speeds and extremely limited electrical interference. This cable is classified as duplex (two fibers) which means it permits simultaneous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41020 -
This 20 meter (~65 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11120 -
This 20 meter (~65 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-01220 -
LC/UPC to SC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 20 meter (65.6 ft) -
LC OM4 Duplex 2.0mm Fiber Optic Patch Cord, OFNR/LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, Spool, 200 meter (656 ft)
