-
1U Finger Duct Cable Manager, Cold Rolled Steel, Black -
Rackmount 12 Port Cat5e Patch Panel, 12 Port, Horizontal, 110 Type, 568A & 568B Compatible, 1U. This 1U rackmount patch panel has 12 Cat5E ports and is used for setting up complex high-speed LANs.Part No. 68PP-03012 -
Rackmount 16 Port Blank Keystone Patch Panel, 1U. This blank keystone patch panel is perfect for creating your own patch panels and has 16 ports. This blank patch panel is nineteen inches.Part No. 68PB-01016 -
Rackmount 24 Port Cat5e Patch Panel, Horizontal, 110 Type, 568A & 568B Compatible, 1U. This 1U 24-port rackmount Cat5e patch panel is used for setting up complex high-speed LANs. This is an 110 type and is compatible with 568A&568B.Part No. 68PP-03024 -
Rackmount 5X D Ring Cable Manager, 1U. 1U Tool-less 5 D-Ring Cable Manager makes it easy to manage cables in any type of network rack or enclosure. Get the convenience of a cable routing blank, a 5 D-ring minder, and our tool-less spacer blank all in one! This unique cable manager has snap-in clips that lock in place with any cage-nut-style rail. It can also be screwed in place for racks with tapped rails using the standard mounting holes. The dual design allows the 1U Tool-less 5 D-Ring Cable Manager to mount in two different ways. Face the D-rings toward the front of the rack to easily manage and support patch cables or face them toward the back of the rack where the open design provides easy support of trunk cables. The seven large routing holes provide the convenience you need to run cables from the back of the rack to the front. Ease of installation and multiple mounting options make this one of the most versatile cable managers on the market today!Part No. 61CR-04101 -
Rackmount Component Shelf, 19 inch Rack 12 inch deep, 1U. The 1U 12 inch Component Rack Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs.Part No. 61S2-11201 -
Rackmount Flat Spacer Blank, 1U. These Spacer Blanks are a cut above the rest. Most people think of spacers or filler panels as just that, something to fill gaps in server racks and cabinets. Spacer Blanks/Filler Panles make racks and cabinets look neat, clean, and organized.Part No. 61B2-21101 -
Rackmount Spacer Blank, 1U. Spacer Blanks are a cut above the rest. Spacer Blanks or Filler Panels are often thought of as a way to fill in any gaps in a rack. Filler Panels make racks looks neat, clean, and organized. When installed properly, the rack not only looks good but the added strength you get from using Spacer Blanks protect your equipment. These Spacer Blanks have two 1/4 inch flanges to make them more rigid and shore up a server rack or cabinet. Flanged Spacer Blanks/Filler Panels provide the most added strength, and are often used to help manage air flow. They can easily be installed with any rack hardware or use the Tool-less snap in clip provided. The Tool-less feature makes installation a breeze with any cage nut Style Rail.Part No. 61B2-11101 -
Rackmount Vented 4 Point Adjustable Shelf, 19 inch Rack 1U. The 1U Vented 4-Point Adjustable Rack Shelves are the most versatile vented adjustable shelf available. This shelf adjusts from 22 inch to 36 inch and therefore it is no longer necessary to figure out the depth of the rails in the rack. This shelf will work with every 19 inch EIA compliant 4-post rack or server cabinet on the market today. The 1U Vented 4-Point Adjustable Shelf allows the full depth of the rack to be used because the entire shelf plate adjusts rather than just the mounting flanges. The Unique ventilation pattern allows for maximum airflow.Part No. 61S2-23101 -
Rackmount Vented Component Shelf, 19 inch Rack 12 inch deep, 1U. The 1U 12 inch Vented Component Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs.The 1U 12 inch Vented Component Shelf has the strength you need and the venting pattern will allow for maximum air flow.Part No. 61S1-21201 -
Rackmount Hinged Wall Mounting Bracket, 1U, Dimensions: 1.75 (H) x 19 (W) x Expandable Depth 9-14 inches. This expandable patch panel mounting brackets are ideal for small spaces. These brackets mount to the wall, saving valuable floor space. They come with a hinged mount to allow easy access to the backside of the patch panel. The bracket is expandable from 9 inch to 14 inch deep allowing enough room to mount most switches and patch panels. They are available in 1U, 2U, 4U and 8U sizes. This model is 1U.Part No. 68BP-3001U -
1U Swing Out Fiber Optic Patch Panel, Capacity 2 LGX Adapter Plates / Cassettes / Modules, Unloaded, Black Powder Coat. Our 1U Swing Out Patch Panel accommodates 2 LGX adapter plates, modules or cassettes. It is designed to house fiber terminations and accommodate patching of fiber links. The swing-out design offers easy access to cable and splices located in the patch and splice bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. These units can be flush mounted or mounted with 3.5 inch protrusion from the rack with no additional accessories. Rack mount installs into a standard 19 inch rack with included mounting hardware. Adapter panels and 23 inch telco rack mounting brackets are sold separately. Details- Swing Out Shelf
- Holds 2 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Flush Mount or 3.5 inch Protrusion; No Accessories Required
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 11.5in D x 1.75in H
Part No. 68F2-10210 -
2 inch Magnetic Bridle Ring, 90 lbs pull strength, 1/4-20 threading, 10 pieces/bagPart No. 30MA-01303 -
2 inch Magnetic J-Hook rated to 17 lbs, Top Mounted, 360 Degree Rotation, UL Listed, 10 Pieces/BagPart No. 30MA-01103 -
2 inch High Performance J-Hooks, Standard Mount, Black, 25-Pack -
2 inch J-Hook 90° Top Mount, rated to 60lb, 360 Degree Rotation, 25 Pieces/Bag -
2 Inch J-Hook, Wall Mount Style with Retainer Clips, 25 pack -
This is a standard white phone-jack wall plate for use in home or office. It is a single gang wall plate that supports 2 lines via a single RJ11 jack (4 conductors).Part No. 300-204WH -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31002 -
This 2 meter (~6.6 feet) aqua 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41002 -
This 2 meter (6.6 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21002 -
DVI-A cables are designed to carry an analog signal. This 6.6 foot black cable is perfect if you have a newer graphics card with a DVI output and a monitor that only supports VGA. DVI cables are used with newer video cards and monitors for higher resolution. DVI-D (Digital) can not convert to VGA (Analog). Only DVI-A (Analog) can be converted into VGA (Analog).Part No. 10V4-05302BK -
This 2 meter (6.6 foot) Black DVI-D cable will extend an existing dual link DVI-D cable. Connect your computer to your monitor or HDTV and enjoy high definition resolution with this DVI (Digital Video Interface) cable. Single link DVI cables are capable of resolutions of 1920 x 1200 which will cover 1080p - enough to satisfy most HD fans. For even higher resolutions, dual-link DVI cables can support up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of a DVI cable is 5 meters, longer lengths will require an amplifier: Part # 41H1-144DVPart No. 10V2-07202BK -
Our 2 meter (6.6 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 5 meters, longer lengths will require our thicker 24 gauge cable or an amplifier: Part # 41H1-144DV.Part No. 10V2-05302BK-F -
Our 2 meter (6.6 foot) black DVI-D Single Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrite cores and 28 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your monitor or HDTV. Single link DVI cables support high definition resolutions of up to 1920 x 1200 which will cover 1080p (1920 x 1080) - enough to satisfy most HD fans. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 1920 x 1200 resolution displays is 5 meters, longer lengths will require our thicker gauge cable or an amplifier: Part # 41H1-144DV. The maximum length cable for a display with a resolution up to 1280 x 1024 is 15 meters, beyond that you would need an amplifier.Part No. 10V1-05302BK-F -
This 2 meter (6.6 foot) IEEE-488 cable is used to connect certain medical equipment. With a CN24 Male and Female on each end, you can daisy chain multiple cables from one port. With an aluminum foil and braid shielding, this 26 AWG (American Wire Gauge) cable will provide you with the signal you need.Part No. 11E1-01702 -
Hook and Loop Cable Sock, Black, 2 meter length, 1 inch diameter when closed -
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11002 -
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11002 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01202 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202 -
Our 2 meter USB A to C cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any computer, laptop, wall wartt/charging block or other device which uses the older style rectangular port that is known as the USB A port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 2.0 specification.Part No. 10U2-32102 -
USB-C Cable, USB 3.1 Type C Male to Type C Male - 10Gbit - 2 Meter (6.56ft) -
2 PC to 1 USB Device, Manual Switch. USB2.0Part No. 40U1-01002 -
- Can be used with DVI or HDMI equipped high definition set top boxes, satellite receivers, DVD players, computers, HDTVs and projectors
- Supports HDTV resolutions of up to 1080p, 3D and multi-channel digital audio
- HDCP compliant for trouble-free operation
- Supports maximum cable distances of up to 20m (10m in, 10m out)
- Very neat and compact design
- 2 year warranty
Part No. 38026 -
- Connects two serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Fast Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 85 x 115 x 23mm (WxDxH)
- 2 year warranty
4 Port versionalso available, LINDY Part No. 25105Part No. 25104 -
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- Supports PCI Express Specification Revision 1.1
Serial Port:- Speed: Up to 921Kbps
- Card Connector: 2 x 9 Way D Male
Parallel Port:- Speed: Up to 15Mbps
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port) or SPP (Standard Parallel Port)
Part No. 51188 -
-
- Connectors: 2 shielded SATA Female connectors to 2 x internal SATA Male connector
-
- Length: 25cm
Please Note: The connectors used on this backplate are standard SATA connectors which have been specially shielded for use with older external SATA drive housings. They are not eSATA connectors.Part No. 33121 -
-
- Bus Type: PCIe (2.5Gbit/sec)
- Speed: SATA II (3Gbit/sec)
- Internal Connector: 1 x SATA Female
- External Connector: 1 x eSATA Female
- Port Multiplier and Native Command Queuing support
- Supports RAID levels 0, 1, 0+1, 5 and JBOD
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
Part No. 51171 -
- Bus Type: 32 Bit PCI
- Speed: Serial ATA-150
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Internal Connector: 2 x SATA Female
- Supports 2 independent Serial ATA channels
- Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
- Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
- Integrated PCI DMA engines
- RAID Function Level 0 and 1 (Mirror and Stripe Set)
- Standard and Low Profile PC Back Plates included
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51150
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
