- Provides a VGA socket with screw connection.
- Two double nuts are optional. These can be screwed onto the screws on the connector side where needed.
- Gold-coated contacts and housing for optimum signal transfer and exceptional long-term stability
- All pins connected 1:1
- 10 year warranty
-
This 90 degree bracket adapter allows you to connect VGA cables to the rear of your device in parallel in order to save space. It can be screwed onto the VGA socket and is only a few centimetres deep. It is angled (upwards) across the long edge of the VGA connector.Part No. 70318
-
- Perfect for using older VGA equipment with a HDMI display
- Converts and combines VGA and analog audio signals into a HDMI signal
- Supports resolutions up to 1080p
- Supports stereo analog audio
- Simple plug and play installation
- Supports 12bit per channel (36 bit total) deep Color
- Supports 225MHz/2.25Gbps per channel (6.75Gbps total) bandwidth
- Multi country power supply included
- 2 year warranty
Please Note: This product is a format converter, from analog to digital, there is no resolution scaling.Part No. 38095 -
- Can be used with PCs, Macs, DVD players, PVR HDD recorders, set top box, games consoles etc
- Automatically detects the mode and resolution of the PC/HDTV input signal
- On-screen display menu system for output resolution and refresh rate selection
- 48MB frame buffer for frame rate conversion
- 2 year warranty
Part No. 32563 -
The Vesta Pro 600 uninterruptible power supply (UPS) is designed with the small home office and/or home theater in mind. It is compatible with any hardware you are looking to protect from computers like Windows/Linux PCs or Apple/Macs to DVRs, Blu-ray players, TVs, cable boxes, and so much more. In the event of a power outage, you will have enough backup battery to save important files and properly shut down your system/equipment. Not only do you receive protection from an initial spike/outage, but your devices are also protected should the power surge when it is restored by your electric company. Additional information
- Capacity: 600 Volt Amp / 300 Watt
- LCD indicators for battery and load capacities, faults, and more
- Supports direct communication to PC/Mac via the USB Device port (USB Type-B)
- Included software supports Win 7/8/10, Server 2008 R2/2012 R2, Linux, and Mac
- RJ11/RJ45 ports provide protection to a standard modem, fax, phone, or network cable
- 3 outlets provide both surge protection and battery protection
- 3 outlets provide surge protection
- A warranty card is included in the box with purchase and is covered by the manufacturer.
- 1 year coverage on the batteries.
- 2 years coverage on remaining parts.
Part No. 91W1-30600 -
The Vesta Pro 2000 uninterruptible power supply (UPS) is designed with the small home office and/or home theater in mind. It is compatible with any hardware you are looking to protect from computers like Windows/Linux PCs or Apple/Macs to DVRs, Blu-ray players, TVs, cable boxes, and so much more. In the event of a power outage, you will have enough backup battery to save important files and properly shut down your system/equipment. Not only do you receive protection from an initial spike/outage, but your devices are also protected should the power surge when it is restored by your electric company. Additional information
- Capacity: 2000 Volt Amp / 600 Watt
- LCD indicators for battery and load capacities, faults, and more
- Supports direct communication to PC/Mac via the USB Device port (USB Type-B)
- Included software supports Win 7/8/10, Server 2008 R2/2012 R2, Linux, and Mac
- RJ11/RJ45 ports provide protection to a standard modem, fax, phone, or network cable
- 4 outlets provide both surge protection and battery protection
- 4 outlets provide surge protection
- A warranty card is included in the box with purchase and is covered by the manufacturer.
- 1 year coverage on the batteries.
- 2 years coverage on remaining parts.
Part No. 91W1-32000 -
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.Please note: these doublers are sold as single units not pairs.
- 1 x 10/100Base-T device and 1 x Voice or Token Ring device to 1 port
- Low cost solution for adding extra connections
- Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
- No performance loss
- Saves adding additional cable runs
- Ideal for existing installations where additional cables cannot be installed easily
Part No. 34003 -
Did you get that fancy new MacBook only to discover it's solitary USB-C port is supposed to do everything, including charging. Do you remember when you would get USB ports, an HDMI or maybe a VGA out and even an Ethernet port? Perhaps it's the latest toy from Lenovo, Dell, or any other of the laptop manufacturers looking to cut costs. Maybe you got the latest Samsung Galaxy or other device that supports DisplayPort over USB-C. We have some good news for you, our USB-C adapter, powered by DisplayPort over USB-C gives you an SVGA out no typo DP carries the SVGA signal, a USB 3.0 Type-A Port the old rectangle for expansion and a handy USB-C charge back port so you can keep your devices ticking while getting work done.
Part No. 30U3-32000 -
Did you get that fancy new MacBook only to discover it's solitary USB-C port is supposed to do everything, including charging. Do you remember when you would get USB ports, an HDMI or maybe a VGA out and even an Ethernet port? Perhaps it's the latest toy from Lenovo, Dell, or any other of the laptop manufacturers looking to cut costs. Maybe you got the latest Samsung Galaxy or other device that supports DisplayPort over USB-C. We have some good news for you, our USB-C adapter, powered by DisplayPort over USB-C gives you a 4K @30Hz HDMI out no typo DP carries the HDMI signal, a USB 3.0 Type-A Port the old rectangle for expansion and a handy USB-C charge back port so you can keep your devices ticking while getting work done.
Part No. 30U3-33000 -
- This cable works in conjunction with Vista's 'Windows Easy Transfer' software to quickly and easily copy data between two computers. It's ideal for XP users who have purchased a new Vista equipped PC and need to transfer their email messages and settings, program data, photos, files etc. It's also especially useful in an IT support environment as a link between two Vista PCs to copy files and settings.
-
- Works automatically with Vista's built-in 'Windows Easy Transfer' software
-
- Allows connection between an XP PC and a Vista PC, or between two Vista PCs
-
- Much neater, more convenient solution than using CDs, DVDs, Flash Drives or external hard drives to transfer data
-
- Very quick and easy to setup and use; allows you to transfer:
-
- User accounts
-
- Files and Folders
-
- Email messages, settings and contacts
-
- Photos, music and videos
-
- Program data, files and settings
-
- Internet settings
-
- USB 2.0 compliant
-
- Compatible with Windows XP/Vista and 7
-
- Length: 2.6m
Please note:- This cable can be used to connect a Vista PC to either an XP PC or another Vista PC only. It cannot be used to connect two XP PCs together.
Part No. 42951 -
-
- Connects to any serial RS422 device via USB Type A
- 9 Way D Male to USB A Male connectors
- Plug & Play - USB bus-powered with no external power supply required
- Compatible with Windows, Mac and Linux operating systems
- 2 year warranty
The Lindy USB to Serial Converter allows simple connection of peripheral devices featuring 9 Way Serial RS422 to a USB Type A port. With both USB Type A and serial connectors, this device is a perfect solution for connecting legacy RS422 equipment such as barcode scanners and industrial devices to notebooks and Macbooks, in retail, IT and digital signage scenarios.
This converter is compatible with Windows, Mac and Linux operating systems. It supports hot-swapping so the user can quickly switch serial devices without shutting down their computer. The converter is USB bus-powered, it can be installed quickly and simply with no need for additional power supplies.
" -
Add an extra HDMI monitor to a computer and/or laptop via an available USB A port. Use this handy adapter and avoid needing to install a second video card to gain an additional display.
- Compliant with USB 3.0 Specification
- Backward Compatible with USB 2.0 Specification
- HDMI Output Supports 1920 x 1080
- 1.65 Gbps / 165 MHz / 24 bit Bandwidth
- Support all Function of Primary, Extended, Mirror & Rotate
- Support OS : Windows XP / Vista / 7 / 8 / 10, Mac OS X 10.7 and above
Part No. 41V3-30110 -
- Ideal for USB printer sharing
- Combine with a USB hub to share multiple devices e.g. printers, scanners, etc.
- "Plug & Play"
- Supports high speed (480Mbit/sec), full speed (12Mbit/sec) and low speed (1.5Mbit/sec)
- Bus-powered with no external power supply required
- Electronic switching via push button or from the PC keyboard hotkeys (hotkey switching is not available for Mac and SUN computers)
- Connectors: 1 x USB Type A Female (USB Device) and 4 x USB Type B Female (Computer)
- Maximum cable lengths: 2m (input), 2m (output)
- A Type A to Type B USB cable (not included) is required for each computer and device connection
- Compatible with Windows 95(OSR2.1)/98/ME/2000/XP/Vista, Mac OS 8.6 to 9.2 & 10 and SUN computers
2 Port USB 2.0 Switch also availablePart No. 42904 -
- Sits inline to measure current and voltage output from any USB port
- Wide voltage and amperage range (up to 24 Volts / 6 Amps)
- 6 Digit LED display for clear and accurate readings
- Compatible with QC 1.0, 2.0 and 3.0
- 2 year warranty
The LINDY USB Power Meter plugs directly into any powered USB port. It allows for easy, convenient monitoring of output voltage and operating current. It quickly tells you if your USB socket is providing power normally and if devices are receiving enough power to operate. A LED display allows you to instantly read the information without affecting the performance of the device.
It is ideal for monitoring the power usage of an external drive or other USB peripherals as well as checking the power demands of your smartphone, tablet etc. It can also be used to check the different power outputs of your computers USB Ports, wall charger, battery pack, or even a USB enabled solar panel. Compatible with Quick Charge technology it can easily read any voltage up to 24 volts or measure any current up to 6 amps.Depending on the orientation of your USB Ports combining the USB Power Meter with one of our Passive Type A Male to Female USB Extension Cables or 90 Degree Male to Female L-Adapters, will allow for easier positioning and viewing of the LCD display.
Please note - USB sockets will only output as much power as is demanded by the device you are charging, the USB Power Meter will show the voltage and amperage being delivered from the USB port. It will not show the maximum possible power output from the USB socket.Part No. 43032 -
This adapter can be used with many micro B phones and tablets, basically adding a USB port. OTG stands for On-the-Go, meaning this plug is ultra-portable and can be used anywhere. This device will allow the tablet or phone to hook up to a mouse, keyboard, flash drive or an external hard-drive by a standard USB connection. Micro USB male plug on one end and USB type A female on the other. The cable length is 4.5 inches and comes in black.Part No. 30U2-21100
-
- Add additional Ports to your mobile device
- USB OTG Micro-B connection for mobile devices
- 3 x USB Type A Female for connecting accessories
- Supports keyboards, mice and external storage
- Full size SD and Micro SD slots
- Supports SDXC*, SDHC and SD formats
- 2 Year Warranty
* Please note SDXC may not be supported by all mobile devices, please refer to the device's manufacturer
This simple to USB hub with card reader can be attached to your mobile device to add 3 USB ports which can be used to connect USB peripherals such as a keyboard, mouse or external storage. In addition the integrated card reader allows you to transfer data to/from popular memory cards and your mobile device.
Part No. 42626 -
- Stylish miniature 4 port USB 2.0 Hub with integrated cable
- Space saving design - ideal for use with desktop and notebook computers
- Easy "Plug & Play" installation and operation
- 4 downstream ports with automatic connectivity and speed detection
- Bus powered from the computer, or self powered using an optional power supply
- Compatible with all USB 2.0 and USB 1.1 enabled computers and devices
- Dimensions: 40 x 70 x 25mm (WxDxH)
If you have a USB 1.1 interface in your PC or Mac, this hub is fully backwards compatible, allowing you to use your existing peripherals whilst remaining 'future proof' when you upgrade to a high speed USB 2.0 interface.Part No. 42998 -
- Extends a single USB port up to 50m using low cost Cat.5/5e/6 network cable (not included)
- Supports data transfer rates of up to 12Mbps
- Plug and Play Installation, OS independant
- Powered by the USB Bus
- 2 year warranty
The Lindy Cat.5 USB Extender can be used to extend the distance between a USB device and a host computer by up to 50m. It consists of a local unit, which can be connected to the computer or laptop and a remote unit which connects to USB devices including webcams and storage devices, perfect for long distance access to files or in video conferencing scenarios.
Standard, low cost Cat.5e/6 cable (not included) is used to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables.
A power supply can be connected optionally for use with high current USB devices.
" -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679
-
- USB Type A Male to USB Mini 8 Pin Male
- Fully moulded
- 10 year warranty
IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.LINDY also supply a range of USB Card Readers, perfect for use with digital cameras.Part No. 31676 -
- USB Type A Male to USB Mini 4 Pin Male
- Fully moulded
- 10 year warranty
IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.LINDY also supply a range of USB Card Readers, perfect for use with digital cameras.Part No. 31675 -
- Upgrade your computer or add additional high speed ports with this 32 Bit PCI Card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 480Mbit/sec
-
- Chipset: Via VT 6212
-
- Easy "Plug & Play" installation
-
- Silicon fuses provide protection for each port
-
- EHCI based 480Mbit/sec USB 2.0 Hi-Speed compliant
-
- OHCI based 12Mbit/sec USB 1.1 compliant
-
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
-
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista
Part No. 51060 -
-
- Bus Type: 32 Bit PCI
- Speed: Up to 480Mbps
- Chipset: Via VT 6212L
- Silicon fuses provide protection for each port
- USB 2.0 and USB 1.1 compliant
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
- Software Compatibility: Windows ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51063 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.
- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5 m to 3m
Part No. 31952 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.
- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5 m to 3m
Part No. 31951 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.
- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5 m to 3m
Part No. 31953 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.
- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5m to 3m
Part No. 31950 -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
-
This adapter connects a USB C equipped computer or smartphone to a TV, monitor, or projector with an HDMI input. The USB C device must support DP Alt Mode or Thunderbolt 3. This adapter measures 6 inches in length and is white in color. Details
- USB C device must support DP Alt Mode or Thunderbolt 3
- Supports HDMI resolutions up to 4K@60Hz
- Supports HDCP 2.2
- Supports HDMI bandwidth up to 18 Gbps
- No external power required
Part No. 30U3-34260 -
- USB 3.0 SuperSpeed up to 5Gbps
- USB 2.0 and 1.1 compatible
- Suitable for 2.5″ and 3.5″ SATA lII HDDs/SSDs* and 5.25″ ODD drives
- Compliant to SATA III Specification
- Plug and Play
- Compatible with Windows XP/Vista/7, Mac OSX 10.8 and Linux
* Please Note: This product does not directly support 3.3V HDD/SSD, to use drives which require 3.3V please use our SATA/Micro SATA AdapterPart No. 43119 -
- 5 Slots to provide access to the most popular types of memory card
- Slot 1: Compact Flash (including CF UDMA)
- Slot 2: Memory Stick
- Slot 3: SD & Mini-SD
- Slot 4: MicroSD & TransFlash
- Slot 5: xD
- Supports the fastest card variants such as SDHC, SDXC and CF UDMA
- Supports maximum of SDXC or CF UDMA 64GB
- SuperSpeed USB 3.0 data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0/1.1
- Includes a 50cm USB 3.0 Cable
- Dimensions: 74 x 60 x 18mm (WxDxH)
Part No. 43150 - 5 Slots to provide access to the most popular types of memory card
-
- Bus Type: PCI Express (x1)
- Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
- Compliant with USB 3.0 Rev. 1.0 specification
- Compliant with PCIe 2.0 Specification
- Each USB port supplies +5VDC/900mA
- Supports USB 3.0, USB 2.0, and USB 1.1 devices
- Connectors: USB 3.0 Type A Female (3 x External, 1 x Internal) & 15 Way SATA Power
- Chipset: TI
- All ports are silicon fused
- Software Compatibility: Windows 7 (32/64bit), Vista, XP, Linux 2.6.32
- Includes standard and low profile brackets
- 2 Year warranty
Part No. 51121 -
- USB 3.0 Type A connector to Type A connector
- Suitable for data transfer rates of up to 5.0 Gbit/s
- Superspeed USB 3.0 cable: Double-shielded
- Connector: gold-plated, LINDY Design, anthracite
- Color: anthracite
- Lengths from 0.5 m to 5 m
- Note: These USB 3.0 cables are compatible with USB 2.0 and can also be used with the latest USB 2.0 Type A sockets.
Part No. 31276 -
- USB Type A Male to USB Type B Male
- Features 28AWG for Data and 24AWG for Power
- Fully moulded with double shielded construction
- Length: 0.5m
- 10 year warranty
This high quality USB cable has been designed to provide optimum performance when connected to USB 3.0 equipped PCs and peripherals. Fully compliant with the USB 3.0 specification, the cable supports data transfer speeds of up to 5Gbps, and benefits from double shielded construction and fully moulded connector hoods for maximum strength and total reliability. The cable is also fully compatible with the USB 3.1 Gen 1 specification.
Part No. 41810 -
- High performance hub with active cable that provides an extended 10m connection between a computer and up to 4 USB 3.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used)
- Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5Gbps
- Easy to use – connects to the device’s existing USB cable (5m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 3.0 SuperSpeed peripherals over long distances. With support for data transfer speeds of up to 5Gbps this extension hub is perfect for transferring large data volumes quickly and reliably.
This 10m extension hub can be used standalone or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 3.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to about 40m (depending on the cable configurations used).
Please note that only the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229) can be connected directly to your computer. If you are creating an extension using multiple units from the Extension Pro System then the first unit must always be the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229). Once the first cable has been connected, you can then cascade further cables to achieve a maximum distance of 40m. The final part of the extension can be any of the three parts of the Extension Pro System. If you need to extend multiple devices or if you connect a USB device with high power requirement, then you should use the 10m Hub Pro unit (Nr. 43159) with it’s power supply as the final part of the extension.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
Information about USB 3.0, 3.1 & 3.2
USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps. -
- Gives you better access to USB 3.0 ports
- Connectors: USB 3.0 Type A Male, USB 3.0 Type A Female
- USB 3.0 SuperSpeed Compliant
- Ideal for situations where space or access is limited such as the rear of PC towers
- Use to redirect ports and connecting cables for a neater installation
- Projects 27mm from ports when connected
- color: Black
- Dimensions (WxDxH) 20 x 40 x 23 mm
- 10 Year Warranty
-
USB 3.0 Type A Male to Type A connector. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 5m. Note: This USB 3.0 cable is compatible with USB 2.0 .Part No. 31873
-
USB 3.0 Type A Male to Type A connector. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 5m. Note: This USB 3.0 cable is compatible with USB 2.0 .Part No. 31872
-
- Compliant with USB 2.0 specification
- Can be used as mirror or extended desktop
- Resumes from hibernation and suspend modes
- Supports up to 6 additional connections
- DisplayLink Chipset
- Easy to install - no need to open the computer case
- Supports resolutions up to 1080p (see full list below)
- Bus powered
- Compatible with Windows 2000/XP/Vista/ 7 (32/64bit) & 8, Mac OS 10.4
- 2 year warranty
Part No. 42744 -
- Compliant with USB 2.0 specification
- Easy to install - no need to open the computer case
- Bus Powered - supplied with an 90cm USB power cable (no external power supply required)
- Compact design, easy to carry and store
- Supports 3D and resolutions up to 1080p, for both video playback and high resolution desktop (see below for more information)
- HDCP Compliant
- Supports stereo audio over HDMI
- Can be used as a mirrored or extended desktop
- Compatible with Windows XP/Vista/7 (32/64bit) & 8 and Mac OS 10.4.11, 10.5.5 and 10.6
- 2 year warranty
Note: An HDMI cable is not included, why not choose your required length from our range of HDMI Cables?Part No. 42698 -
- Supports DVI and VGA Displays
- USB 2.0 Compliant (USB 1.1 not supported)
- Up to 6 adapters can be connected to one PC
- Bus Powered
- Displaylink chipset
- Supports Resolutions up to 2048 x 1152 (32 Bit)
- Supports video playbck up to 1080p
- Requires a minimum 1.2GHz single core processor
- Supports up to 6 USB displays simultaneously
- Hot plug: easily add or remove displays without the need for system reboot
- Windows XP/Vista/7/8 compatible
- 2 year warranty
Part No. 42728 -
- Easy to install smart card reader compatible with a variety of computer operating systems
- Supports smart card operations for digital signature, authentication security etc.
- Compatible with corporate ISO 7816 smart card applications
- USB 2.0 High Speed data rates up to 480Mbps
- 2 year warranty
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
" -
- 5 Slots for over 80 types of memory cards
- Slot 1: Compact Flash
- Slot 2: Memory Stick
- Slot 3: SD & Mini-SD
- Slot 4: MicroSD & TransFlash
- Slot 5: xD
- Supports maximum of SDHC 32GB
- Dedicated SIM Card Slot
- High speed USB 2.0 data transfer rate up to 480Mbit/s
- Integrated USB A plug
- USB Extension Cable (AM-AF), approx. 90cm
- Supports PC & Mac* Software to edit the data stored on the SIM card
- Dimensions: 67 x 40 x 13mm (WxDxH)
*SIM maps are not supported by MacPart No. 42982 - 5 Slots for over 80 types of memory cards
-
- USB 2.0 to Fast Ethernet Adapter (also known as a USB to Cat5 / USB to RJ-45 adapter)
- Converts a USB 2.0 port into an auto-sensing 10Base-T or 100Base-TX Fast Ethernet port
- Easy plug & play installation
- Backwards compatible with USB 1.1 and 1.0 host controllers
- Both full and half duplex modes supported
- Bus-powered from USB port
- Activity LED
- Compatible with ME/2000/XP/Vista/7/8, Mac OS X, Linux
- 2 year warranty
Part No. 42974 -
This USB dual power cable can be used to connect a PC to a bus-powered external USB device which has power consumption requirements greater than 500mA (e.g. hard drive enclosures, USB 2.0 hub). It features two USB Type A connectors, one for data and power and one for power only. The cable terminates in a mini B connector for connecting to the device. For bus-powered USB devices with power consumption requirements of up to 1A. Can be used with either USB 1.1 or USB 2.0 peripherals. 2 x Type A USB Male to USB Type mini B Male. Fully shielded cable with moulded connectors. 10 year warranty.Part No. 31781
-
- Allows you to easily transfer data between two computers, laptops or different operating systems
- Ideal for copying documents, movies, music, photos, email etc
- Integrated software provides an easy to use interface for data transfer
- Fast data transfer of up to 16MBs
- Plug & Play- easy to setup and use
- USB 1.1 and 2.0 compatible
- Length: 1.8m
- Compatible with Windows 2000, XP, Vista, 7
Part No. 42615 -
More InformationThis card reader supports the following memory cards:Compact Flash (CF), Micro Drive (MD), Smart Media (SM), xD Picture Card (xD), MultiMediaCard (MMC), MMC Plus, Secure Digital (SD), Secure Digital High Capacity (SDHC), High Speed SD, Memory Stick (MS), High Speed MS, MS-Pro, High Speed MS-Pro, Mini SD, MS Duo, MS Pro-Duo, RS-MMC, MMC mobile, T-Flash*, MMC-ROM, MMC Plus ROM, MMC Mobile ROM, MS ROM, MS-Pro ROM, SM ROM* An adapter is required which is not included. Usually supplied with the memory card.Part No. 42939
-
- Bus Type: ExpressCard/34
- Speed: Up to 480Mbps
- Connectors: 2 x Type A USB Female
- Ideal for connecting extra USB peripherals such as printers, scanners, drive housings etc., to your notebook
- Built-in power jack for optional adapter for use when the connected device require power from the USB port
- For use with computers which feature ExpressCard expansion slots
- Compatible with Windows 2000/XP/Vista/Windows 7/Server 2003, 2008 and Mac OS 8.6
- 2 Year warranty
Part No. 51505 -
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
Part No. 42961 -
USB 3.0 Type A Male to Type A connector. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 5m. Note: This USB 3.0 cable is compatible with USB 2.0 .Part No. 31870
-
- 4 x Voice or Token Ring devices to 1 port
- Only for analogue telephone lines, not VoIP, LAN
- Must be used in pairs by connecting one to a patch panel and the other to a wall outlet
- Low cost solution for adding extra connections
- Existing installations can be expanded quickly and simply
- Additional devices can easily be added temporarily or permanently
- No performance loss
- Saves adding additional cable runs
- Ideal for existing installations where additional cables cannot be installed easily
Please note: these multipliers are sold as single units not pairs." -
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: PCIe (2.5Gbit/sec)
- Speed: ATA-133
- Internal Connector: 40 Way EIDE Male
- 40 Way IDE Ribbon Cable included (supports two drives)
- Standard and Low Profile PC Back Plates included
- Supports RAID levels 0, 1 and JBOD
- Pin header for drive LED connection
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008
- 2 Year warranty
Part No. 51177 -
Soldering station's 20/40 watt switchable temperature setting allows you to solder electronic circuits or heavier jobs. Whether you are a professional or a DIYer, this is the ideal solder tool for you. Non-slip base has power indicator light, tip cleaning sponge, and heat dissipating coil cradle for the pencil-style soldering iron.Part No. 9005-10270
-
This 6 foot power cord will power UK/English notebook computers that do not require a polarized connection. The device end of this cable is a standard IEC C7 while the UK end is the BS 1363. While this cable is listed as a notebook power cord, it will work with any device that uses an IEC C7 power connection. Ideal for replacing damaged, overused, or missing UK power cords. This cable has a 5A fuse.Part No. 10W1-23406
-
- TosLink Male to Mini Optical Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink or Mini Optical interface
- Immune to electrical interference
- Protective shell, outer diameter 4mm
- Moulded connectors fitted on both ends
This digital optical cable is part of a wide range from LINDY including TosLink, Premium Gold TosLink, Mini Optical and TosLink to Mini Optical cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation.Part No. 35224 -
- TosLink Male to Mini Optical Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink or Mini Optical interface
- Immune to electrical interference
- Protective shell, outer diameter 4mm
- Moulded connectors fitted on both ends
This digital optical cable is part of a wide range from LINDY including TosLink, Premium Gold TosLink, Mini Optical and TosLink to Mini Optical cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation.Part No. 35222 -
- TosLink Male to Mini Optical Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink or Mini Optical interface
- Immune to electrical interference
- Protective shell, outer diameter 4mm
- Moulded connectors fitted on both ends
This digital optical cable is part of a wide range from LINDY including TosLink, Premium Gold TosLink, Mini Optical and TosLink to Mini Optical cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation.Part No. 35221 -
- TosLink Male to TosLink Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink interface
- Immune to electrical interference
- Protective shell, outer diameter 2.2mm
This digital optical cable is part of a wide range from LINDY including , and cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation." -
- TosLink Male to TosLink Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink interface
- Immune to electrical interference
- Protective shell, outer diameter 2.2mm
This digital optical cable is part of a wide range from LINDY including , and cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation." -
- TosLink Male to TosLink Male
- High quality fiber optic cable ensures crystal clear digital audio transmission
- For use with many modern Dolby Digital (Dolby 5.1, 6.1, AC3, Prologic, etc.) and DTS surround sound receivers, DVD players, MD players and recorders, MP3 and DAT recorders, professional Audio Cards for Computer Digital Audio workstations, Outboard AD/DA Converters and satellite dish receivers
- Compatible with all SPDIF (Sony-Philips Digital Interface Format), ADAT's, DAW's and Dolby Digital DTS audio devices using the TosLink interface
- Immune to electrical interference
- Protective shell, outer diameter 2.2mm
This digital optical cable is part of a wide range from LINDY including , and cables.Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation."