Part No. 10XR-01415
-
Our 15 foot 3-Pin XLR Male to 1/4 Inch Mono Male Audio Cables are built with high quality XLR and 1/4 inch connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise. -
Our 15 foot 3-Pin XLR Audio Cables are built with high quality XLR connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise.Part No. 10XR-01215 -
This 15ft Cat6 4-Pair SSTP (double shielded) Outdoor Ethernet Patch Cable is designed for even the harshest industrial environments. This cable's water resistant caps allow the cable to be run though environments with both water and dirt. This patch cable features a 26AWG pure copper stranded wire and is filled with a CMX rated gel. RoHS compliant.Part No. 10X8-72215 -
This Aqua Blue jacketed 15 meter (~49 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31015 -
- Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control
- HDMI Full HD 1080p and HEC compatible
- HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p@30hz
- For connecting longer lengths up to 45m use with LINDY Premium Gold HDMI Cables
- 2 year warranty
Please note: Some projectors have recessed HDMI sockets.
You should make sure they can accommodate the connector used on this cable.
- The connector dimensions are 19 x 38 x 11mm (WxDxH)
- High Speed HDMI Active Cables cannot be connected together or 'daisy chained'
- HDMI - The Standard for Connecting HDTV
- All Digital
- No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard
- One Cable
- All of your HD video and audio in one cable
- Say goodbye to cable clutter
- One HDMI cable can replace up to 8 audio and 5 video cables
The new HDMI High Speed specification offers benefits over the previous version:
HDMI Ethernet Channel (HEC)
The High Speed HDMI HEC Cable specification has an additional data channel that enables high speed bidirectional communication.
Connected devices that include this feature will be able to send and receive data via 100mb/sec ethernet, making them instantly ready for any IP based application.
It will also allow internet enabled HDMI devices to share their internet connection with other HDMI devices without the need for a separate ethernet cable.
This new feature will also provide the connection platform to allow HDMI enabled devices to share content between devices.
Audio Return Channel (ARC)
The new specification will add an Audio Return Channel that will reduce the number of cables required to deliver audio upstream for processing and playback.
In cases where HDTV's are directly receiving audio and video content, this new Audio Return Channel allows the HDTV to send the audio stream to the A/V receiver over the HDMI cable, eliminating the need for an extra cable.
3D
The new specification will define common 3D formats and resolutions for HDMI-enabled devices.
The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.
4K
The new specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p.
Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.
Formats supported include:
- 3840 x 2160 @ 24Hz/25Hz/30Hz
- 4096 x 2160 @ 24Hz
Content Type
Content Type enables, automated picture setting selection with no user intervention.
The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new contect cource is selected.
Content Type supports content profiles for gaming, movie, photograph and text viewing modes.
Audio Formats
HDMI supports multi channel digital audio on a single cable.
It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional suopport for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accomodate future enhancements and requirements.
The following formats are supported:
- SA-CD
- DTS-HD Master AudioTM
- DVD-Audio
- Dolby TrueHD
- Dolby Digital / Plus
- MPEG1 Layer I / II
- MPEG2
- MP3
- AAC LC
- DST / DSD (as used in SA-CD)
- DTS
- ATRAC
- WMA Pro
- MLP (as used in DVD-Audio)
Expanded Support for color Spaces
HDMI technology now supports color spaces designed specifically for digital still cameras.
By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colors when connected to a digital still camera.
Part No. 41052 -
- 3.5mm Stereo Jack Male to 2 x Phono Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35495 -
- High-performance video cable for use with VCRs, TVs, DVD players etc.
- Delivers superb clarity, definition and detail
- Connectors: 3 x Phono Male to 3 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37535 -
-
- Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control functions
-
- Compatible with HDTV and HDCP (High-Bandwidth Digital Content Protection) - the content scrambling standard for modern, advanced digital video displays and DVD players
-
- Connectors: HDMI Male/Male, Type A
-
- 10 year warranty
Note:- Some projectors have recessed HDMI sockets. The dimensions of the recess need to be large enough to accommodate the HDMI connector used on this cable. The connector dimensions are 23 x 36 x 14mm (WxDxH).
Part No. 41147 -
-
This Aqua Blue jacketed 15 meter (~49 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. (Not for Home Theater)Part No. LCLC-31015-PL -
- Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male
- 24K gold plated connectors for improved signal quality and resistance to tarnishing and corrosion
- Triple shielded, low attenuation cable design
- The patented, unique RF-BLOK full metal connector greatly reduces interference and provides increased EMC shielding without the need for a ferrite core
- Supports DVI resolutions up to 2560x1600 (WQXGA)
- Supports HDTV resolutions up to 1080p
- Available in lengths up to 25m
- Also available as a standard DVI-D Cable in lengths up to 10m
- 25 Year Warranty
Part No. 37006 -
- Connectors: DVI-D Single Link Male to DVI-D Single Link Female
- 24K gold plated connectors for improved signal quality and resistance to tarnishing and corrosion
- Triple shielded, low attenuation cable design
- The patented, unique RF-BLOK full metal connector greatly reduces interference and provides increased EMC shielding without the need for a ferrite core
- Supports DVI resolutions up to 1920x1200 (WUXGA)
- Supports HDTV resolutions up to 1080p
- Available as a Premium Gold DVI-D Super Long Distance cable
- 25 Year Warranty
Part No. 37071 -
Our Premium Gold HDMI cable features advanced design and construction for the highest quality and maximum reliability.The triple shielded, low attenuation cable provides superb clarity, definition and detail, even over longer distances, while the 24K gold plated connectors allow for excellent, consistent signal transfer.It's the perfect choice for home cinema and professional display installations.Part No. 37407 -
- VI-D Single Link Male to DVI-D Single Link Male
- For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
- UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
- RF-BLOK shielded design
- 10 Year Warranty
LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).
Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.
Features of the RF-BLOK shielded design:- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
" -
- 2 x SC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125?m multimode fiber
- Zip twin 2.8mm
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.5db (max)
- Includes insertion loss test report
- Color: Orange
- 10 year warranty
Part No. 46085 -
16 Port 10/100 Fast Ethernet Switch, Black. The 71X5-00316 switch provides an ideal solution for small businesses that demand a reliable network switch that provides a high bandwidth interface between file servers and workgroups, departments and offices.Part No. 71X5-00316 -
16 Port 10/100/1000 Gigabit Ethernet Switch, Matte Grey. The 71X6-00316 is equipped with 16 Gigabit ports that lead you to a real Gigabit connections. Users are able to transfer large and high bandwidth-needed files faster, and hence get a real improvement of efficiency.Part No. 71X6-00316 -
16 Port 10/100/1000 Gigabit Ethernet Switch, Matte Grey. 71X6-00416 is a 16-port Gigabit Ethernet Switch that gives you a high-performance, low-cost, easy-to-use, seamless upgrade to boost your network to 1000Mbps. Increase the speed of your network backbone to a massive 32Gbps and bring Gigabit speeds all the way to your computers.Part No. 71X6-00416 -
16/2 (16AWG 2C) Solid FPLR Fire Alarm / Security Cable, Red, 500 ft, Pullbox -
This 16 foot HDMI cable is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio in resolutions higher than 1080p. HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with any device with HDMI such as HDTVs, DVD players, Blu-ray players, game consoles (PS3, Xbox 360), cable and satellite set top boxes, DVRs, computers, etc. This cable also features a plenum (CMP) rated jacket. This means the plastics used to create the jacket are designed to burn less than non-plenum rated cables thus reducing the chances for fires to be spread. This cable meets the strictest requirements for any building codes.Part No. 11V3-41116 -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This high-speed USB 2.0 extender cable eliminates the USB length constraints and allows for extended USB connections. You can combine up to four of our 16ft. cables for a maximum length of 64ft.Part No. UC-50200 -
V Line Fixed Wall Rack, 16U. The V-Line Open Frame Fixed Wallmount racks are the perfect low cost solution that IT Installers and AV Technicians use every day. The knockdown 16U Fixed Wall Racks are incredibly easy to assemble and install. Providing a 300 pound capacity for equipment, the bolt together assembly has a self-squaring design to make assembly easy. When a simple open frame wallmount rack is needed, the V-Line Open Frame Fixed Wallmount rack is a great option.Part No. 61R1-21216 -
LC OM3 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Multimode 50/125, Aqua Jacket, Beige Connector, 17 meter (55.8 ft) -
Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Spool, 500 foot -
Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Pullbox, 500 foot -
Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CM / Inwall rated, Pullbox, 500 foot -
Rackmount Fixed Wall Mount Cabinet, Glass Door, 18U -
19 Inch Cable Management, D Ring, 1U, Metal, Black -
19 Inch Rackmount Cable Management, 12 Slot, 1U, Metal, Black -
19 Inch Rackmount Cable Management, 24 Slot, 1U, Metal, Black -
Our 1 foot 3.5mm mini stereo cables will connect to 3.5-mm jacks from portable CD players, PC sound card, multimedia speakers, MP3 players, iPod, iPad or any audio device using 3.5-mm jacks. You can also connect mp3 players and more to the 3.5mm input available in many new vehicles. These cables feature a spiral shield for rejection of interfering noise and molded connectors to ensure a lasting, durable connection.Part No. 10A1-01101 -
This 1ft Cat6a Black Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications.Part No. 13X6-62201 -
This black 1 foot HD15 (SVGA) Male to BNC (5 Male) Breakout cable is used for connecting a PC to a monitor that utilizes BNC connectors. Our cable features a molded boot, a ferrite bead, and double-shielding to insure minimal signal loss and reduce interference.Part No. 10H1-18101BK -
This 1ft black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02101EBK -
This is a black 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02201BK -
This 1ft Cat6a Blue Slim Ethernet Patch Cable is perfect for installations that are in a tight-spot, and require a thinner cable than the typical thick Cat6a cable. Cat6a is the fastest Ethernet cable available on the market that meets TIA/EIA standards. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss can be seen and heard. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6 specifications.Part No. 13X6-66101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a black UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12201 -
This one foot black shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This is a black shielded patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-52201 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-16101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-12101 -
This one foot gray shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This gray patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-52101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a orange UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-13101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a purple UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-14101 -
Cat5e Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-19101
