- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388
-
-
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation" -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
- Accommodates 6 face plate modules
- Supplied with 4 x blank face plate modules
- Flip up cover with identification label
- Suitable for surface mounting
- Multiple cable entries
- Dimensions: 170 x 205 x 55mm (WxDxH)
- Color: White
- Warranty: 2 years
Note: picture shown for illustration only, the shown modules are not included.Part No. 60549 -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
" -
- 10 pack
Part No. 62050 -
5 packPart No. 62051 -
- 10 pack
- Crimp Type
Part No. 62201 -
- 10 pack
- Crimp type
Part No. 62202 -
- 10 Pack
Part No. 62270 -
-
-
- 50 Pack
Part No. 66002 -
- 50 Pack
Part No. 66021 -
- Allows you to internally attach a Premium Gold cable to our VGA Face Plate
- Post: # 4-40 UNC, 14mm
- Nut: # 4-40 UNC, 5mm
- Each pack contains 10 nuts and 10 posts
Pack of 50 also availablePart No. 66026 -
Screws, spacers, bolts, nuts and jumpers for PC installation personnelPart No. 66050 -
This USB to PS/2 adapter cable allows you to connect a USB combo mouse to your computers PS/2 mouse port. Please note this feature is not supported on all USB mice.
- USB Type A Female to 6 Pin Mini DIN Male
- Compatible only with USB/PS/2 combo mice
- Cable length: 15cm
-
- Moulded
- 10 year warranty
Part No. 70015 -
-
- 5 Pin DIN Female to 6 Pin Mini DIN Male
-
- Fully moulded
Part No. 70029 -
-
- Moulded
- 10 year warranty
Part No. 70030 -
- Saves wear and tear on your expensive ports
Part No. 70069 -
- Saves wear and tear on your expensive ports
-
- Saves wear and tear on your expensive ports
-
- Saves wear and tear on your expensive ports
Part No. 70073 -
- Saves wear and tear on your expensive ports
Part No. 70074 -
- Saves wear and tear on your expensive ports
Part No. 70082 -
- An easy way to convert the gender of a cable connection
- Can save wear and tear on expensive ports
Part No. 70092 -
- Saves wear and tear on your expensive ports
Part No. 70093 -
- An easy way to convert the gender of a cable connection
- Can save wear and tear on expensive ports
-
- 5 Pin DIN Female to 6 Pin Mini DIN Male
- Fully moulded
Part No. 70129 -
- 6 Way RJ-11/RJ-12 Female to 6 Way RJ-11/RJ-12 Female
Part No. 70171 -
- 40 Way IDC Male & 5¼" Power Male to 44 Way IDC Female
Part No. 70199 -
- Configurable wiring
- Any pin to any pin
- 10 year warranty
Part No. 70245 -
Modular system This adapter comprises:- RJ45 coupling with 8 connected Crimp connectors, Color-coded.
- 9-pin Sub-D connector,
- Contacts are pluggable in any arrangement
Part No. 70246 -
This 90 degree bracket adapter allows you to connect VGA cables to the rear of your device in parallel in order to save space. It can be screwed onto the VGA socket and is only a few centimetres deep. It is angled (upwards) across the long edge of the VGA connector.- Provides a VGA socket with screw connection.
- Two double nuts are optional. These can be screwed onto the screws on the connector side where needed.
- Gold-coated contacts and housing for optimum signal transfer and exceptional long-term stability
- All pins connected 1:1
- 10 year warranty
Part No. 70318 -
- Mini version
- 10 year warranty
Part No. 70345 -
- Mini version
- 10 year warranty
Part No. 70346 -
- 4 Pin FireWire Male (Camcorder, etc.) to 6 Pin FireWire Female
- IEEE 1394 compliant
- Color: Black
Part No. 70395 -
- Converts a standard TosLink plug to a mini optical Plug
- Ideal for use with MD players etc.
Part No. 70412 -
- Converts a mini optical plug to a standard TosLink plug
- Ideal for use with MD players etc.
Part No. 70413 -
- Connects two TosLink cables together
- For use with DVD players, CD players, Home Cinema and professional audio devices etc.
-
- Connects two mini optical cables together
- For use with DVD players, CD players, Home Cinema and professional audio devices etc.
Part No. 70415 -
- 4 Way Digital Optical Audio Switch
- Supports cables distances of up to 5m in (for each input) and 5m out
- Input ports: 4 x TosLink (Optical fiber)
- Output port: 1 x TosLink (Optical fiber)
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) digital audio signal output
- Supports compressed 2-channel and multi-channel Dolby and DTS audio signals
- Includes 5V DC multi country power supply
- Dimensions: 95 x 85 x 35mm (WxDxH)
- 2 year warranty
Please note: TosLink cables are not included, we recommend you use cables from the LINDY TosLink Cable or Premium Gold TosLink cable range2 Way TosLink Switch, 2 Way TosLink Splitter, SPDIF to analog and analog to SPDIF converters are also available.Part No. 70416 -
- ST Female to ST Female, Simplex
- Multi-mode
- Mounts into a standard 3/8″ 'D' Hole
- Ceramic ferrule
- Metal housing
Part No. 70455
