Part No. 10H1-62310
-
This 10 foot Mini Displayport to HDMI cable will allow you to connect a HDMI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio. -
This 10 foot HDMI male to Mini HDMI male was designed to be used with your camera or tablet, allowing the transfer of digital audio and video in a single cable. This is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multichannel digital audio in any resolution. This cable conforms to the latest HDMI high-speed with Ethernet specifications. Even with its small form factor, this cable supports full HDMI specifications including: high speed 18 Gbps data rate, Ethernet over HDMI, 4k x 2k support, audio return channel, 3D and deep color support. This cable is CL2 rated for in-wall installations. Comes in black.Part No. 10V3-43110 -
This Cat5e 10 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-33110 -
This Cat5e 10 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-33710 -
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09110 -
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-08110 -
This 10 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.Part No. 10W1-13210 -
Our 10 foot high quality null modem serial cable features molded female DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This female to female 8 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-20410 -
This 10ft DB9 Female to DB9 Female null modem cable is usually used to transfer data from one PC directly to another PC and features gold-plated contacts for optimal signal transfer.Part No. 10D1-21410 -
This 10ft DB9 Female to DB25 Male null modem cable is usually used to transfer data from one PC directly to another PC and features molded connectors and gold-plated contacts for optimal signal transfer.Part No. 10D1-21310 -
Our 10 foot high quality null modem serial cable features molded female DB9 and male DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This male to female 8 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-20210 -
This 10ft Bootless Plenum Cat5e Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties. The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X6-12110 -
This is a 10 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04210-16 -
This 10 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.Part No. 10M2-01210 -
This 10 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.Part No. 10M2-01110 -
This 10ft Cat6a Red Slim Ethernet Patch Cable comes with a Snagless/Molded Boot and is the perfect solution to all of your Cat6a needs. The smaller diameter makes for a slimmer, more flexible cable that will fit well into cluttered data centers and other places where space is tight. With speeds up to 500 MHz, this cable twice as fast as regular Cat6. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6a specifications.Part No. 13X6-67110 -
Our 10 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male supporting 25 conductors in a 1:1 configuration. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 25 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D3-01110 -
This high quality 10 foot DB37 Male to DB37 Male 37 conductor(1:1) serial cable features molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.Part No. 10D4-01110 -
Our 10 foot high quality RS-232 serial cable features molded male DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to male (1:1) serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-03110 -
Our 10 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.Part No. 10D3-01210 -
This high quality 10 foot Serial extension cable has male and female DB37 ends. It features 37 conductors in a 1 to 1 pin-out, molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.Part No. 10D4-01210 -
Our 10 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-03210 -
Shielded Cat6 Blue Ethernet Patch Cable, Snagless/Molded Boot, 10 footPart No. 10X8-56110 -
This cable is a blue STP (Shielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.Part No. 13X6-56110 -
This gray 10 foot snagless Cat6a cable is ideal for situations with higher environmental noise than normal. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a gray shielded patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.Part No. 13X6-52110 -
Our 10 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.Part No. 10H1-29110 -
Our 10 foot black Slim HD15 video cable, more commonly referred to as a SVGA male to male cable, is typically used to connect a computer to a computer monitor. This specific cable is a slim version, composed of 32 AWG (American Wire Gauge) coaxial wires, which is easier to route and manage. Ferrite Cores are small magnetic cores wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. Slim SVGA Monitor Cables are smaller diameter than normal SVGA cables. Slim SVGA Cables also have a smaller hood and ferrite's to fit where other SVGA Cables will not. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-11110 -
This 10 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20210 -
This 10 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02110E -
This is a 10 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02210 -
This is a 10 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02110 -
USB 2.0 Type A Male to Type A Male Cable, Black, 10 foot -
Our black 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110BK -
Our blue 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110 -
Our black 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110EBK -
Our blue 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110E -
Our 10 foot 3-Pin XLR Female to 1/4 Inch Mono Male Audio Cables are built with high quality XLR and 1/4 inch connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise.Part No. 10XR-01510 -
Our 10 foot 3-Pin XLR Male to 1/4 Inch Mono Male Audio Cables are built with high quality XLR and 1/4 inch connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise.Part No. 10XR-01410 -
Our 10 foot 3-Pin XLR Audio Cables are built with high quality XLR connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise.Part No. 10XR-01210 -
This 10ft Bootless Plenum Cat6 Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties. The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X8-12110 -
Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 1 meter -
Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 2 meter -
Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 3 meter -
This Aqua Blue jacketed 10 meter (~33 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31010 -
- High-performance audio cable for connecting Hi-Fi separates, audio, and home cinema equipment
- Delivers superb clarity, definition and detail
- Connectors: 2 x Phono Male to 2 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37524 -
- Ideal for use as a replacement phono lead for hi-fi's and music equipment etc.
- 2 x Phono Male to 2 x Phono Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35474 -
- 3.5mm Stereo Jack Male to 2 x Phono Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35494
