Part No. 3502-009
-
DB9 / HD15 (Serial / VGA) Snap on Plastic Hood. Add this DB9/HD15 (serial/VGA) snap-on plastic hood to ensure extra protection to your VGA plug when building your custom VGA cable. This beige-colored plastic hood will add a sturdy layer of protection to your VGA port to help protect the ends of your cables from any damage that may occur - you can be confident that they are secure after installation. Our DB9 snap-on plastic hood includes the necessary hardware for installation and comes with a lifetime product warranty. -
Telephone Cord (Data), RJ11, 6P / 4C, Silver Satin, Straight, 7 foot. This 7 foot flat silver satin telephone cable is designed for data use, straight / 1 to 1 pin out. It is ideal for connecting modems and fax machines where a medium length cord is needed to reach the wall jack. These telephone cords feature 6 position 4 conductor RJ11 connectors and four 28 AWG (American Wire Gauge) wires in each cord.Part No. 8101-64107 -
Telephone Cord (Data), RJ11, 6P / 4C, Silver Satin, Straight, 14 foot. This 14 foot flat silver satin telephone cable is designed for data use, straight / 1 to 1 pin out. It is ideal for connecting modems and fax machines where a medium length cord is needed to reach the wall jack. These telephone cords feature 6 position 4 conductor RJ11 connectors and four 28 AWG (American Wire Gauge) wires in each cord.Part No. 8101-64114 -
Telephone Cord (Voice), RJ11, 6P / 4C, Silver Satin, Reverse, 7 foot. This 7 foot Silver Satin RJ11 Telephone cable is used to connect your phone to your wall. It is the flat variety and has 6 pins on the RJ11 plugs and features 4 conductors. The cable is reversed for voice applications.Part No. 8101-64207 -
Telephone Cord (Data), RJ12, 6P / 6C, Silver Satin, Straight, 1 foot. This 1 foot Silver Satin RJ12 Telephone cable is used to connect your phone to your wall. It is the flat variety and has 6 pins on the RJ12 plugs and features 6 conductors.Part No. 8102-66101 -
Telephone Cord (Voice), RJ12, 6P / 6C, Silver Satin, Reverse, 7 foot. This 7 foot Silver Satin RJ12 Telephone cable is used to connect your phone to your wall. It is the flat variety and has 6 pins on the RJ12 plugs and features 6 conductors. The cable is reversed for voice applications.Part No. 8102-66207 -
Slim Mold Aux Cable, 3.5mm Stereo Male to 3.5mm Stereo Male, 3 footPart No. 10A1-02103 -
Slim Mold Aux Cable, 3.5mm Stereo Male to 3.5mm Stereo Male, 6 footPart No. 10A1-02106
-
Slim Mold 3.5mm Stereo Extension Cable, 3.5mm Male to 3.5mm Female, 6 footPart No. 10A1-02206 -
3.5mm Stereo to Dual RCA Audio Adapter Cable, 3.5mm Female to Dual RCA Male (Red/White), 6 inchPart No. 30S1-01261 -
Modular Adapter, Gray, DB25 Male to RJ12Part No. 31D3-36210 -
TV Wall Plate with 1 F-pin Coupler, 3GHz WhitePart No. ASF-20351WH -
3.5mm Stereo to Dual RCA Audio Adapter Cable, 3.5mm Male to Dual RCA Female (Red/White), 6 inch -
DC Power Plug to 19AWG Bare Wire, DC Male to Open Ends, 1 foot -
DC Power Socket to 19AWG Bare Wire, DC Female to Open Ends, 1 foot -
USB Coupler / Gender Changer, Type A Female to Type A Female, Black -
Cat6 Yellow Copper Ethernet Patch Cable, Snagless/Molded Boot, POE Compliant, 2 foot -
Cat6a White Copper Ethernet Patch Cable, 10 Gigabit, Snagless/Molded Boot, POE Compliant, 500 MHz, 1 foot -
Phone Splitter (Straight), RJ45 8P8C Male to 2 RJ45 8P8C Female, Beige -
Phone Splitter (Straight), RJ45 8P8C Male to 2 RJ45 8P8C Female, White -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
Modular system This adapter comprises:- RJ45 coupling with 8 connected Crimp connectors, Color-coded.
- 9-pin Sub-D connector,
- Contacts are pluggable in any arrangement
Part No. 70246 -
- 6 Pin Mini DIN Male to 6 Pin Mini DIN Female
- Fully moulded
- 10 year warranty
-
The Smart Keeper USB Port Lock Essential is a physical cybersecurity device that prevents unauthorized connection to an unused USB port. It is the best USB port blocker available. USB port lock key NOT included Requires one Smart Keeper Lock Key Essential for removal. Key and USB port blockers must be the same color.- Easy to Use: The Smart Keeper USB Port Lock Essential can be installed by hand.
- Various Patterns: Multiple color patterns for these USB port blockers are available.
- All-Purpose Key: A common USB port lock key can be used to unlock 10 different products within the Essential series, including these USB port blockers.
- USB Cable Lock
- Keyboard | Mouse Lock
- Lockable Flash Drive
- Smart Data Blocker
- RJ45 Port Lock
- LAN Cable Lock
- Network Module Lock (4P | 8P | 12P)
- Serial, DVI, Parallel Port Locks
- Enhanced Security: Each USB port lock has four security holes for the most secure fit of these USB port blockers.
- Click here to compare the Smart Keeper USB Port Lock Essential with the rest of your Smart Keeper items.
Part No. UL03 -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Data and power cable
- SATA 7 Pin Male to SATA 7 Pin Male data cable, 50cm
- SATA 15 Pin Male to 5.25" Male power cable, 15cm
- 10 Year warranty
-
- 3.5mm Stereo Jack Male to 3.5mm Stereo Jack Female
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35464 -
-
- Full CAT5e specification with moulded boots
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
-
- 10 year warranty
Part No. 44125 -
-
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Ideal for use as a replacement USB lead for your digital camera, MP3 player, DV Camcorder etc.
- USB Type A Male to USB Type mini B Male
- Fully moulded
- 10 year warranty
Important: Please check before you purchase this cable that the USB device you intend to connect has a mini B type connector.Part No. 31887 -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5 m to 3m
Part No. 31952 -
- 3 x Phono Male to 3 x Phono Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35540 -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
This USB dual power cable can be used to connect a PC to a bus-powered external USB device which has power consumption requirements greater than 500mA (e.g. hard drive enclosures, USB 2.0 hub). It features two USB Type A connectors, one for data and power and one for power only. The cable terminates in a mini B connector for connecting to the device. For bus-powered USB devices with power consumption requirements of up to 1A. Can be used with either USB 1.1 or USB 2.0 peripherals. 2 x Type A USB Male to USB Type mini B Male. Fully shielded cable with moulded connectors. 10 year warranty.Part No. 31781 -
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Micro A Male to USB 2.0 Type Mini B Male
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31962 -
- An easy way to convert the gender of a cable connection
- Can save wear and tear on expensive ports
Part No. 70092 -
- 2 x ST Female to 2 x SC Female, Duplex
- Multi-mode
- Snap-in mounting
- Metal ferrule
- Plastic housing
Part No. 70461 -
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Micro A Male to USB 2.0 Type Mini B Male
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31960 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 31980 -
- SATA 1.0a and SATA II compatible
- Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports
- Can also be used with standard non-latching SATA ports
- 10 year warranty
-
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44745 -
- Saves wear and tear on your expensive ports
Part No. 70073 -
- Internal to External Adaptor Cable (including PC Back Plate)
- 1 x Type A USB 2.0 Female to Type A USB 2.0 Male
- Compatible with USB 2.0/1.1
- Cable length: 30cm
- 10 year warranty
-
- Quality, high performance cable from one of the world's leading brands
- Represents excellent value for money
- Triple shielded cable construction for optimum RF and EMI protection
- Solid core construction
- 1080p over HDMI ready
- Supports resolutions up to 1080p,
- ARC and CEC compatible
- Deep Color capable, x.v.Color and xvYCC ready
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41370 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45804 -
Premium cable for use with USB OTG devices.
• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Micro-B Male
• Red Micro-B is the OTG Host connector
• Black cable
• Fully shielded cable with moulded connectors
• Cable length: 2m
• 10 year warranty
" -
- USB Type A Male to USB Micro-B 90 Degree Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
-
- 2 x SC Female to 2 x SC Female, Duplex
- Multi-mode
- Snap-in mounting
- Metal ferrule
- Plastic housing
Part No. 70464
