web analytics
  • Shielded Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Shielded Cat6 Gray Ethernet Patch Cable, Snagless/Molded Boot, 14 foot
    Part No. 10X8-52114
  • This 8 inch HD15 Male to HD15 Female monitor cable splitter will split a low resolution video signal coming from a computer so that you can display the same image on 2 monitors. This cable is good for resolutions only up to 800 x 600. It is recommended to keep the cable runs from this splitter to 15 ft or less. If you are looking to go farther than 15 ft, you will need to use one of the following distribution amplifiers or you may lose quality of signal: 41H1-14812, 41H1-14814, 41H1-14818 or 41H1-148116.
    Part No. 10H1-27708
  • This 7 foot gray shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This particular cable is a gray shielded patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
    Part No. 10X6-52107
  • This 7 foot blue shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This is a blue shielded patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
    Part No. 10X6-56107
  • This 75ft Cat6 4-Pair SSTP (double shielded) Outdoor Ethernet Patch Cable is designed for even the harshest industrial environments. This cable's water resistant caps allow the cable to be run though environments with both water and dirt. This patch cable features a 26AWG pure copper stranded wire and is filled with a CMX rated gel. RoHS compliant.
    Part No. 10X8-72275
  • This 75 foot gray shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This is a gray patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
    Part No. 10X6-52175
  • Our 6 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03206
  • This high quality 6 foot Serial extension cable has male and female DB37 ends. It features 37 conductors in a 1 to 1 pin-out, molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.
    Part No. 10D4-01206
  • Our 6 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.
    Part No. 10D3-01206
  • Our 6 foot high quality serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB9 male to DB25 male supporting 9 conductors. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 9 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-02106
  • Our 6 foot high quality RS-232 serial cable features molded male DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to male (1:1) serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03106
  • Our 6 foot high quality RS-232 serial cable features molded female DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This female to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03406
  • This high quality 6 foot DB37 Male to DB37 Male 37 conductor(1:1) serial cable features molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.
    Part No. 10D4-01106
  • Our 6 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male supporting 25 conductors in a 1:1 configuration. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 25 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D3-01106
  • This is a 6 foot VHDCI 68 to HPDB68 SCSI III cable with gold-plated connectors for superior data transfer and thumb screws to securely attach the cable between the host and the device.
    Part No. 10N3-01106
  • This is a 6 foot high quality external SCSI II device cable that features gold-plated connectors on 25 twisted pairs for superior data transfer. This particular cable features a Half Pitch DB50 (HPDB50) male connector on one end and a DB50 male on the other end.
    Part No. 10P1-02106
  • This 6 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.
    Part No. 10M2-01106
  • This 6 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.
    Part No. 10M2-01206
  • This is a 6ft parallel cable with the following connectors. The Type A connector is a DB25 male. The Type C connector is an HPCN36 / HPCentronics 36 male. This cable has 18 pairs.
    Part No. 10E2-02106
  • Our 6 foot high quality null modem serial cable features molded female DB9 and male DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This male to female 8 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-20206
  • This 6ft DB9 Female to DB25 Male null modem cable is usually used to transfer data from one PC directly to another PC and features molded connectors and gold-plated contacts for optimal signal transfer.
    Part No. 10D1-21306
  • This 6ft DB9 Female to DB25 Female null modem cable is usually used to transfer data from one PC directly to another PC and features molded connectors and gold-plated contacts for optimal signal transfer.
    Part No. 10D1-21406
  • Our 6 foot high quality null modem serial cable features molded female DB9 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This female to female 8 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-20406
  • Our 6 foot high quality null modem serial cable features molded male DB25 and female DB25 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This male to female 8 conductor serial cable is solidly constructed, ROHS compliant. Pin Outs: 1-1, 2-3, 3-2, 4-5, 5-4, 6+8-20, 7-7, 20-6+8, G-G.
    Part No. 10D3-08206
  • This 6 foot Mini Displayport to HDMI cable will allow you to connect a HDMI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.
    Part No. 10H1-62306
  • This 6 foot Mini Displayport to VGA cable will allow you to connect a VGA monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.
    Part No. 10H1-62406
  • This 6 foot Mini Displayport to DVI cable will allow you to connect a DVI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses DVI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.
    Part No. 10H1-62206
  • This 6 foot high quality DB9 female to DB25 male serial cable is for hooking up an HP (Hewlett Packard) plotter printer to your PC. This serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This female to male 8 conductor serial cable is solidly constructed.
    Part No. 10D1-13306
  • This cable extends out a DisplayPort male to DisplayPort female cable by six feet. This is perfect when you need a longer length, but don't want to replace the whole cable. Just extend it out with this DisplayPort extension cable until you get it exactly where you need it.
    Part No. 10H1-60206
  • This 6 foot high quality serial / modem cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. Our cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion / interface cards that have a 9 pin serial port. This female to male 9 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-02306
  • Our 6 foot black high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03206BK
  • Our 6 foot high quality DB25 Male to Centronics 36 (CN36) Male bidirectional parallel printer cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The cable sports 25 conductors. This cable is ideal for connecting 25 pin bidirectional printer ports on laptops, computers and expansion/interface cards to printers and devices have a 36 pin Centronics bidirectional parallel port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant. There are 3 basic types of Printer Connectors; Type A, Type B, and Type C. Type A is a DB25. Type B is a CN36. Type C is an HPCN36.
    Part No. 10E2-01106
  • Our 6 foot bidirectional printer cable features DB25 Male connectors on both ends. This is a A to A printer cable with 18 twisted pairs. In order to make use of the bidirectional capability of this cable the printer and printer port must be configured to support bidirectional communication.
    Part No. 10E2-05106
  • This 6 foot cable is referred to as a Din 5 (male). It is an older AT keyboard cable. This cable's pinout is straight through which means pin 1 on one end is connected to pin 1 on the other end. It is round and larger than the more recent MiniDin6 connector that replaced it for a time in keyboards and Mice. USB has since replaced the MiniDin6 (PS/2) connector which would then make Din5 a Grandfather. Congrats to Din5!
    Part No. 10I5-02106
  • This 6 foot DB15 Male to DB15 Female Apple/Mac monitor extensions cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.
    Part No. 10D2-01206
  • This 6 inch cable is designed to adapt newer PS/2-style keyboards to older DIN5 (AT) motherboard connections. Just plug the male DIN5 end into the appropriate port on your computer, and plug your PS2 keyboard into that. You can now use your newer keyboard on your older computer.
    Part No. 10I5-012HF
  • This 6 inch cable is designed to convert older DIN5 (AT)-style keyboards to the newer PS/2 connection. Just plug the male PS2 end into the appropriate port on your computer, and plug your DIN5 keyboard into that. You can now use your older keyboard on your newer computer.
    Part No. 10I5-013HF
  • Our 6 foot MiniDin8 Apple/Mac serial extension cable features a MiniDin8 male and female ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.
    Part No. 10M3-04206
  • Our 6 foot MiniDin8 Apple/Mac serial cable features MiniDin8 male ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.
    Part No. 10M3-04106
  • This 6 foot DB15 Male to DB15 Male Apple/Mac monitor cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.
    Part No. 10D2-01106
  • Shielded Cat6 Ethernet cables are typically used for networking, data transfer and for connecting phone lines. Cat6 cables can connect a cable or DSL modem to a router/switch in the home or office, or inside a server/network room. Cat6 cables were designed specifically for Gigabit Ethernet applications. These cables perform at high-data transfer rates; and exceed the EIA/TIA-568-C standard. Cat6 has stricter specifications for noise restriction and crosstalk than its Cat5 predecessor. This cable includes a spline to help ensure separation between the pairs which limits crosstalk. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. These cables are shielded, which protects them from outside electromagnetic interference.
    Part No. 10X8-52105
  • Shielded Cat6 Blue Ethernet Patch Cable, Snagless/Molded Boot, 5 Foot
    Part No. 10X8-56105
  • This 5 foot gray shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This gray shielded patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
    Part No. 10X6-52105
  • This 5 foot blue shielded Cat5e cable will retain a high quality signal when passing near/parallel to high voltage or power cables. It is ideal for noisy environments and/or environments where interference is expected. This particular cable is a blue STP (Shielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.
    Part No. 10X6-56105
  • Our 50 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D1-03250
  • Our 50 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.
    Part No. 10D3-01250
  • Our 50 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male supporting 25 conductors in a 1:1 configuration. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 25 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10D3-01150
Go to Top