Part No. 10X1-022MH
-
This is a bulk reel of 1000 foot RG58 coaxial cable. This cable is primarily used for connecting up Ethernet Coax systems. Each center conductor strand is bare copper for maximum conductivity. -
RG58 / U Solid, 95% Braided, 1000 ft. This is a bulk reel of 1000 ft, no connectors. This cable is primarily used for connecting up Ethernet Coax systems.Part No. 10X1-022NH -
This 1000 foot Black BNC RG59/U 75 Ohm coaxial cable comes in easy to use pull boxes. Its primary use is for custom video runs for CCTV, Surveillance and Security video systems. The cable features a 20 AWG solid copper core.Part No. 10X3-022TH-20 -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
Outdoor runs of RG6 require cable that is specifically designed for that environment. Our direct burial/outdoor rated RG6 cable is UV rated for protection from direct sunlight. Using a cable that is not UV rated would cause the cable to deteriorate over time, and cause the signal to fail eventually. This cable can also be used for direct burial scenarios as well. Just dig a trench, and lay this cable in with the peace of mind that you will receive a reliable signal.Part No. 10X4-622NH -
Our 1000 foot White Siamese/CCTV cables come in easy to deploy spools and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291NH -
This 100 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-011HD -
This 10 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-01110 -
This 15 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-01115 -
This 15 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connectors on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports powering/charging over FireWire.Part No. 10E3-01115 -
This 25 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-01125 -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connector on one end and a 4 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-02106 -
This 3 foot black FireWire 800 (IEEE-1394b) cable features a 9 pin connector on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 800 Cables meet the specifications outlined in the IEEE-1394b standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: 3200 Mbit/s (400 megabytes/s) and the older S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-99003BK -
This 3 foot BNC cable is primarily used for connecting Ethernet coaxial networks. It features a stranded copper center conductor and fully-molded nickel connectors for superior signal retention. Color is black.Part No. 10X1-01103 -
Our 500 foot White Siamese/CCTV cables come in easy to use pull boxes and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291TF -
This 50 foot black BNC cable is primarily used for connecting up Ethernet Coaxial networks and features a stranded copper center conductor and fully molded nickel connectors for superior signal retention.Part No. 10X1-01150 -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 9 pin connector on one end and a 6 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports power/charging via FireWire.Part No. 10E3-96006BK
