Part No. 10E3-96006BK
-
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 9 pin connector on one end and a 6 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports power/charging via FireWire. -
Our blue 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110 -
Our blue 10 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02210 -
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 6 Foot -
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Mini-A Male to USB 2.0 Type B Male
- Oval, semi-transparent white Mini-A connector, in accordance with the USB OTG standard
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31631 -
- USB 2.0/OTG Type Mini-A Male to USB 2.0 Type Mini-B Male
- Oval, semi-transparent white Mini-A connector, in accordance with the USB OTG standard
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31636 -
Data- and power supply cable for USB peripherals! This cable provides power to a bus-powered USB peripheral with an amperage of up to 1A (e.g. disk drive enclosure or USB 2.0 hubs). A USB type A connection provides 500 mA and a data connection; the second USB Type A connection supplies an additional 500 mA when needed.Part No. 31779 -
This 3 foot black FireWire 800 (IEEE-1394b) cable features a 9 pin connector on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 800 Cables meet the specifications outlined in the IEEE-1394b standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: 3200 Mbit/s (400 megabytes/s) and the older S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-99003BK -
Our blue 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110E -
USB, On The Go, USB OTG, 12 inchPart No. 30U3-10200 -
2 PC to 1 USB Device, Manual Switch. USB2.0Part No. 40U1-01002 -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- For bus-powered USB devices with power consumption requirements of up to 1A
- Can be used with either USB 1.1 or USB 2.0 peripherals
- 2 x Type A USB Male to USB Type mini B Male
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- USB 2.0/OTG Type Mini A Male to USB 2.0 Type Micro B Male
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31807 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30881 -
USB 3.0 Type A Male to Type Micro-B plug. Suitable for data transfer rates up to 5.0Gbit/s. SuperSpeed USB 3.0 Cable: Double shielded, 5.0Gbit/s. LINDY design, with red boot. Color: transparent. Lengths from 0.5m to 3m. Note: The USB 3.0 Micro-B connector type is not compatible with the USB 2.0 Micro-B type connectorPart No. 31862 -
USB 3.0 Type A Male to Type A connector. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 5m. Note: This USB 3.0 cable is compatible with USB 2.0 .Part No. 31872 -
This 15 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connectors on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports powering/charging over FireWire.Part No. 10E3-01115 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- 15 Way HD Male to BNC Male x 5
- Fully moulded
- 10 year warranty
-
- For bus-powered USB devices with power consumption requirements of up to 1A
- Can be used with either USB 1.1 or USB 2.0 peripherals
- 2 x Type A USB Male to USB Type mini B Male
- Fully shielded cable with moulded connectors
- Length: 1m
- 10 year warranty
-
USB 3.0 Type A Male to Type A Female. Suitable for data transfer rates up to 5,0Gbit / s. SuperSpeed USB 3.0 Cable: Double shielded, design approval, to 5,0Gbit / s. LINDY design, transparent with red boot. Color: transparent. Lengths from 0.5m to 3m. Note: This USB 3.0 cable is compatible with USB 2.0 and can also be used as USB 2.0 extension.Part No. 31879 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Double shielded construction
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 31990 -
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 10 Foot
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
- Fully shielded cable with moulded connectors
- color: black/additional red USB plug (current only)
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.
" -
This high quality USB extension lead complies fully with the USB 3.0 specification allowing data transfer speeds of up to5Gbps.- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to5 Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Female
- Length: 2m
- 10 year warranty
Part No. 31482 -
- For bus-powered USB devices with power consumption requirements of up to 1A
- Can be used with either USB 1.1 or USB 2.0 peripherals
- 2 x Type A USB Male to USB Type mini B Male
- Fully shielded cable with moulded connectors
- Length: 2m
- 10 year warranty
Part No. 31787 -
- Compact moulded plastic construction
- DVI-D Male to DVI-I Female
- Gold plated connectors
- Dimensions: 42 x 27 x 16mm (WxDxH)
- Color: Black
- 10 Year warranty
-
- Compact moulded plastic construction
- DVI-I Male to DVI-I Female
- Gold plated connectors
- Gold plated contacts
- Dimensions: 42 x 27 x 16mm (WxDxH)
- Color: Black
- 10 Year warranty
-
- USB 2.0 High Speed compliant
- Backwards compatible with USB 1.1/1.0 computers
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41593 -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This high-speed USB 2.0 extender cable eliminates the USB length constraints and allows for extended USB connections. You can combine up to four of our 16ft. cables for a maximum length of 64ft.Part No. UC-50200 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5Gbps
- Double shielded construction
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 1m
- 10 year warranty
Part No. 31991 -
- USB 2.0 High Speed Compliant
- 480 Mbps transfer rates
- Backwards compatible with USB 1.1/1.0 computers
- Upgraded 99.99% OFC copper conductors
- Gold plated connectors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type B Male
- Length: 1m
- Color: anthracite
- 10 year warranty
Part No. 41581 -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB 3.0 Micro-B
- Fully shielded cable with moulded connectors
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Micro-B connector for connecting to your device.
" -
Connects Smartphones, Tablets and digital cameras in a single USB port
- USB 2.0 Type A connector to USB 2.0 Type Micro-B connector
- Connector: gold-plated
- Suitable for data transfer rates of up to 480 MBits/s
- High/Full/Low Speed USB 2.0 cable: Double-shielded, high-quality cable material, type approved, up to 480 MBit/s.
- Color: anthracite
- Lengths from 0.5 m to 5 m
Important!Manufacturers use different interfaces on their products. Therefore, make sure your device also has a standard USB Micro-B type connection.Part No. 41594 -
- Allows you to easily transfer data between two computers, laptops or different operating systems
- Ideal for copying documents, movies, music, photos, email etc
- Integrated software provides an easy to use interface for data transfer
- Fast data transfer of up to 16MBs
- Plug & Play- easy to setup and use
- USB 1.1 and 2.0 compatible
- Length: 1.8m
- Compatible with Windows 2000, XP, Vista, 7
Part No. 42615 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 0.3m
- 10 year warranty
Part No. 30784 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30882 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Double shielded construction
- LINDY USB 3.0 Pro Cables use a higher quality construction for a better quality, more durable cable
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 31890 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5Gbps
- Double shielded construction
- Fully moulded
- USB 3.0 Type A Male to USB Micro-B Male
- Length: 2m
- 10 year warranty
Part No. 31992 -
- This cable works in conjunction with Vista's 'Windows Easy Transfer' software to quickly and easily copy data between two computers. It's ideal for XP users who have purchased a new Vista equipped PC and need to transfer their email messages and settings, program data, photos, files etc. It's also especially useful in an IT support environment as a link between two Vista PCs to copy files and settings.
-
- Works automatically with Vista's built-in 'Windows Easy Transfer' software
-
- Allows connection between an XP PC and a Vista PC, or between two Vista PCs
-
- Much neater, more convenient solution than using CDs, DVDs, Flash Drives or external hard drives to transfer data
-
- Very quick and easy to setup and use; allows you to transfer:
-
- User accounts
-
- Files and Folders
-
- Email messages, settings and contacts
-
- Photos, music and videos
-
- Program data, files and settings
-
- Internet settings
-
- USB 2.0 compliant
-
- Compatible with Windows XP/Vista and 7
-
- Length: 2.6m
Please note:- This cable can be used to connect a Vista PC to either an XP PC or another Vista PC only. It cannot be used to connect two XP PCs together.
Part No. 42951 -
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30885 -
- USB 2.0 High Speed compliant
- Backwards compatible with USB 1.1/1.0 computers
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 2m
- 10 year warranty
Part No. 41595 -
- Add additional Ports to your mobile device
- USB OTG Micro-B connection for mobile devices
- 3 x USB Type A Female for connecting accessories
- Supports keyboards, mice and external storage
- Full size SD and Micro SD slots
- Supports SDXC*, SDHC and SD formats
- 2 Year Warranty
* Please note SDXC may not be supported by all mobile devices, please refer to the device's manufacturer
This simple to USB hub with card reader can be attached to your mobile device to add 3 USB ports which can be used to connect USB peripherals such as a keyboard, mouse or external storage. In addition the integrated card reader allows you to transfer data to/from popular memory cards and your mobile device.
Part No. 42626 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 41600 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41617 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 1m
- 10 year warranty
Part No. 30785
