-
Our Black 1.5 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03101.5BK -
Our black 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106EBK -
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- Gold Plated connectors to prevent oxidisation for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- Color: Transparent
- Length: 4.5m
- 10 year warranty
-
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 0.3m
- 10 year warranty
Part No. 30784 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 2m
- 10 year warranty
Part No. 30786 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 3m
- 10 year warranty
Part No. 30787 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 4.5m
- 10 year warranty
Part No. 30788 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 7.5m
- 10 year warranty
Part No. 30789 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30870 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30873 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30874 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30875 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30877 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30880 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30881 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30882 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30883 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30885 -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB Type A Male
- Fully shielded cable with moulded connectors
- color: black/additional red USB plug (current only)
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Type A Female connector for connecting to your device.
" -
- For bus-powered USB devices with power consumption requirements of up to 1.4A
- USB 3.0 SuperSpeed interface for data transfer rates of up to 5Gbps
- Can also be used with either USB 1.1 or USB 2.0 peripherals
- 2 x USB Type A Male (1 x USB 3.0, 1 x USB 2.0) to USB 3.0 Micro-B
- Fully shielded cable with moulded connectors
- 10 year warranty
This USB dual power cable is perfect for connecting a PC to a bus-powered external USB device which has power consumption requirements up to 1.4A. It is ideal for use with USB 3.0 devices such as a USB 3.0 hard drive enclosure.
It features two USB Type A connectors, one of which is a USB 3.0 Type A, the other being USB 2.0. The USB 3.0 connection provides 900mA of current whilst allowing SuperSpeed data transfer rates of up to 5 Gbps, while the USB 2.0 connection provides up to 500mA power only. The cable terminates in a Micro-B connector for connecting to your device.
" -
- USB 3.0 Type A connector to Type A connector
- Suitable for data transfer rates of up to 5.0 Gbit/s
- Superspeed USB 3.0 cable: Double-shielded
- Connector: gold-plated, LINDY Design, anthracite
- Color: anthracite
- Lengths from 0.5 m to 5 m
- Note: These USB 3.0 cables are compatible with USB 2.0 and can also be used with the latest USB 2.0 Type A sockets.
Part No. 31276 -
This high quality USB extension lead complies fully with the USB 3.0 specification allowing data transfer speeds of up to5Gbps.- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to5Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Female
- Length: 0.5m
- 10 year warranty
Part No. 31480 -
This high quality USB extension lead complies fully with the USB 3.0 specification allowing data transfer speeds of up to5Gbps.- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to5 Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Female
- Length: 2m
- 10 year warranty
Part No. 31482 -
- 15 Way HD Male to BNC Male x 5
- Fully moulded
- 10 year warranty
-
Can be used with either USB 1.1 or USB 2.0 devices. Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec. Stylish transparent cable. Ideal for use as a replacement USB lead for your printer, scanner etc. USB Type Mini-A Male to USB Type B Male. Fully moulded. Length: 0.5m. 10 year warranty.Part No. 31627 -
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Mini-A Male to USB 2.0 Type B Male
- Oval, semi-transparent white Mini-A connector, in accordance with the USB OTG standard
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31630 -
This high quality cable complies with USB 1.1, USB 2.0 and USB On-The-Go (OTG) specifications. Supporting data transfer speeds up to 480Mbit/sec, it is fully compatible with all USB and USB OTG devices.- USB 2.0/OTG Type Mini-A Male to USB 2.0 Type B Male
- Oval, semi-transparent white Mini-A connector, in accordance with the USB OTG standard
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31631 -
- USB 2.0/OTG Type Mini-A Male to USB 2.0 Type Mini-B Male
- Oval, semi-transparent white Mini-A connector, in accordance with the USB OTG standard
- Transparent cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Part No. 31636 -
- Can be used with either USB 1.1 or USB 2.0 devices
- USB Type A Male to USB Type A Male
- Fully moulded
- Length: 5m
- 10 year warranty
Part No. 31642 -
This high quality USB extension lead complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.- Can be used with either USB 1.1 or USB 2.0 devices
- Ideal for extending the cable length of smaller USB devices such as Memory Sticks, WLAN and Bluetooth Dongles, MP3 Players etc.
- USB Type A Male to USB Type A Female
- Fully moulded and shielded
- 10 year warranty
Part No. 31653 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Extends cable length between USB devices such as keyboards, mice, printers, scanners, etc
- USB Type A Male to USB Type A Female
- Fully moulded
- 10 year warranty
Part No. 31654 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Extends cable length between USB devices such as keyboards, mice, printers, scanners, etc
- USB Type A Male to USB Type A Female
- Fully moulded
- 10 year warranty
Part No. 31655 -
- USB Type A Male to USB Micro B Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
Part No. 31663 -
- USB Type A Male to USB Micro B Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
Part No. 31664 -
- USB Type A Male to USB Micro B Male
- USB 2.0 and USB 1.1 compatible
- Supports data transfer speeds of up to 480Mbps
- Fully moulded
- 10 year warranty
Part No. 31665 -
- USB Type A Male to USB Mini 8 Pin Male
- Fully moulded
- 10 year warranty
IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.LINDY also supply a range of USB Card Readers, perfect for use with digital cameras.Part No. 31676 -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Stylish transparent cable
- Ideal for use as a replacement USB lead for your printer, scanner etc.
- USB Type A Male to USB Type B Male
- Fully moulded
- Length: 0.2m
- 10 year warranty
Part No. 31703 -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
Premium cable for use with USB OTG devices.
• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Micro-B Male
• Red Micro-B is the OTG Host connector
• Black cable
• Fully shielded cable with moulded connectors
• Cable length: 0.5m
• 10 year warranty
" -
Premium cable for use with USB OTG devices.
• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Micro-B Male
• Red Micro-B is the OTG Host connector
• Black cable
• Fully shielded cable with moulded connectors
• Cable length: 1m
• 10 year warranty
" -
Premium cable for use with USB OTG devices.
• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Micro-B Male
• Red Micro-B is the OTG Host connector
• Black cable
• Fully shielded cable with moulded connectors
• Cable length: 2m
• 10 year warranty
"
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
