- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30869 -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This High Speed USB 2.0 Extender Cable eliminates the USB length constraints and allows for extended USB connections.Part No. UC-50240 -
Our USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A female. This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. This extension cable is fully backwards compatible with previous USB versions. USB 3.0 increases power output from 500 mA to 900 mA, for faster charging of attached devices and support of more robust peripherals. The cable color is blue.Part No. 10U3-02101E -
8 Inch USB Type C Male to USB3.0 (G1) A-Female Cable -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5m to 3m
Part No. 31950 -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679 -
This adapter will convert a USB Type A Female into a USB Type B Female. This is ideal if you need a USB A M/M cable, but you only have a USB A to B M/M cable available.Part No. 30U1-03400 -
This adapter will allow you to plug a Type A USB cable into a Type B USB port. This way you can connect your host to any USB Type B port.Part No. 30U1-03300 -
Our black 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106EBK -
Our blue 6 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106 -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 9 pin connector on one end and a 6 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports power/charging via FireWire.Part No. 10E3-96006BK -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connectors on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports powering/charging over FireWire.Part No. 10E3-01106 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 1m
- 10 year warranty
Part No. 30785 -
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 10 Foot -
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 6 Foot
-
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 3 Foot
-
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 1 Foot
-
USB 2.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 10 Foot -
USB 2.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 8 Foot
-
USB 2.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 6 Foot
-
USB 2.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 3 Foot
-
USB 2.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 1 Foot
-
USB 2.0 High Speed Active Extension Cable, USB Type A Male to Type A Female, 50 foot -
USB 3.0 Active Extension Cable, Type A Male / Type A Female, CMR, 50 Feet, Black -
USB 3.0 Active Extension Cable, Type A Male / Type A Female, CMR, 35 Feet, Black
-
USB 3.0 Active Extension Cable, Type A Male / Type A Female, CMR, 25 Feet, Black
-
USB 2.0 Type A Male to Type C Male - 480mb - 1 Meter (3.28ft) -
2 PC to 1 USB Device, Manual Switch. USB2.0Part No. 40U1-01002 -
USB3.1 TYPE C Male TO VGA Female ADAPTERPart No. 30U3-34660 -
USB 2.0 Active Extension Cable, High Speed USB Type A Male to Type A Female, Blue, 5 meter (16.5 foot)Part No. UC-502BL -
USB-C 3.1 to Gigabit (10/100/1000Mbps) Ethernet Adapter, whitePart No. 30U3-30010 -
Sonix USB Web Camera with built-in Microphone. This HD webcam records 1080p resolution at 30 frames per second for an excellent high-quality video feed. The built-in microphone offers great sound to ensure you are heard loud and clear. Rock your online presentations during the workday and let grandma get a good look at her babies during the evening for the family zoom meeting.Specifications:
Image Sensor 1/2.7 2MP Best image range 5 - 16 feet / 1.5 - 5 meters Lens 3.6mm Encoding format MJPEG Video resolution 1920*1080 Video frame rate 30 fps Microphone Built-in Microphone Pickup distance 16 feet / 5 meters Audio encoding PCM Audio bit rate 32 kbp Dimensions 109 mm length x 40 mm width x 167 mm height Power USB direct power DC 5V Mounting Can be placed horizontally on Monitor or TV, TV Cabinet Part No. 70U2-07510 -
Add an extra HDMI monitor to a computer and/or laptop via an available USB A port. Use this handy adapter and avoid needing to install a second video card to gain an additional display.- Compliant with USB 3.0 Specification
- Backward Compatible with USB 2.0 Specification
- HDMI Output Supports 1920 x 1080
- 1.65 Gbps / 165 MHz / 24 bit Bandwidth
- Support all Function of Primary, Extended, Mirror & Rotate
- Support OS : Windows XP / Vista / 7 / 8 / 10, Mac OS X 10.7 and above
Part No. 41V3-30110 -
USB 3.0 Super Speed Desktop Hub, White, 4 Port, Self PoweredPart No. 41U3-32004 -
Keystone Insert, White, USB 2.0 Type A Female Coupler. This White Keystone Jack with a USB 2.0 A Female to A Female Coupler is for use with in wall USB 2.0 applications. It is designed for use with all Keystone style wall plates and standard USB 2.0 cables. Attach any USB 1.1 or 2.0 cable with ease and simplicity. It features gold plated contacts for maximum connectivity.Part No. 333-320 -
Keystone Insert, White, USB 2.0 Type A Female To Type B Female Adapter (Reversible). This white keystone insert coupler allows you to convert back and forth between a USB 2.0 type A female plug to a type B female adapter - attach any USB 1.1 or 2.0 cable with ease. This reversible adapter is designed to use with all keystone-style wall plates and standard USB 2.0 cables. It is housed in high-impact ABS resin (acrylonitrile butadiene styrene) and is UL 94 V-0 rated. This USB 2.0 connector's shell is made from copper alloy and is plated with nickel -expect exceptional performance with this coupler's contacts that are made from phosphor bronze, plated gold and nickel.Part No. 333-310 -
Placement of USB devices can be difficult, especially when longer runs are required, because normal USB specifications limit connections to a maximum run of only 16ft. This high-speed USB 2.0 extender cable eliminates the USB length constraints and allows for extended USB connections. You can combine up to four of our 16ft. cables for a maximum length of 64ft.Part No. UC-50200 -
This is a pair of USB A ports on a bracket that you can connect to your motherboard to add additional USB ports.Part No. 31U1-02408 -
This adapter connects a USB C equipped computer or smartphone to a TV, monitor, or projector with an HDMI input. The USB C device must support DP Alt Mode or Thunderbolt 3. This adapter measures 6 inches in length and is white in color. Details- USB C device must support DP Alt Mode or Thunderbolt 3
- Supports HDMI resolutions up to 4K@60Hz
- Supports HDCP 2.2
- Supports HDMI bandwidth up to 18 Gbps
- No external power required
Part No. 30U3-34260 -
Did you get that fancy new MacBook only to discover it's solitary USB-C port is supposed to do everything, including charging. Do you remember when you would get USB ports, an HDMI or maybe a VGA out and even an Ethernet port? Perhaps it's the latest toy from Lenovo, Dell, or any other of the laptop manufacturers looking to cut costs. Maybe you got the latest Samsung Galaxy or other device that supports DisplayPort over USB-C. We have some good news for you, our USB-C adapter, powered by DisplayPort over USB-C gives you a 4K @30Hz HDMI out no typo DP carries the HDMI signal, a USB 3.0 Type-A Port the old rectangle for expansion and a handy USB-C charge back port so you can keep your devices ticking while getting work done.
Part No. 30U3-33000 -
Did you get that fancy new MacBook only to discover it's solitary USB-C port is supposed to do everything, including charging. Do you remember when you would get USB ports, an HDMI or maybe a VGA out and even an Ethernet port? Perhaps it's the latest toy from Lenovo, Dell, or any other of the laptop manufacturers looking to cut costs. Maybe you got the latest Samsung Galaxy or other device that supports DisplayPort over USB-C. We have some good news for you, our USB-C adapter, powered by DisplayPort over USB-C gives you an SVGA out no typo DP carries the SVGA signal, a USB 3.0 Type-A Port the old rectangle for expansion and a handy USB-C charge back port so you can keep your devices ticking while getting work done.
Part No. 30U3-32000 -
USB, On The Go, USB OTG, 12 inchPart No. 30U3-10200 -
This adapter can be used with many micro B phones and tablets, basically adding a USB port. OTG stands for On-the-Go, meaning this plug is ultra-portable and can be used anywhere. This device will allow the tablet or phone to hook up to a mouse, keyboard, flash drive or an external hard-drive by a standard USB connection. Micro USB male plug on one end and USB type A female on the other. The cable length is 4.5 inches and comes in black.Part No. 30U2-21100 -
This USB adapter will convert an A female USB to a micro B male USB connector. This works for older devices and devices that have a micro B male USB connector.Part No. 30U1-06100 -
This USB A to USB Mini-B 5 pin adapter features a female A type connector and a mini-b 5 pin male connector. It allows one to convert any male USB type A cable end into a USB Mini-B 5 pin male.Part No. 30U1-05300 -
This adapter will convert a USB A male into a USB A female. This coupler is for type A females to type A females and will extend your USB cable.Part No. 30U1-02400 -
Normally USB specifications limit connections to a maximum run of only 15ft. This can make placement of USB devices difficult, especially when longer runs are required in schools, conference rooms and other spaces that require a plenum cable. This 25 foot Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. This Plenum USB Extender Cable eliminates the USB length constraints and allows for extended USB connections in plenum space.Part No. 11U2-51075 -
This 50 foot plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Normally USB specifications limit connections to a maximum run of only 15ft. This can make placement of USB devices difficult, especially when longer runs are required in schools, conference rooms and other spaces that require a plenum cable. Local building codes may require all cables run inside the walls or ceiling be plenum rated. This Plenum USB extender cable eliminates the USB length constraints and allows for extended USB connections in plenum space.Part No. 11U2-51050 -
Normally USB specifications limit connections to a maximum run of only 15ft. This can make placement of USB devices difficult, especially when longer runs are required in schools, conference rooms and other spaces that require a plenum cable. This 35 foot Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. This Plenum USB Extender Cable eliminates the USB length constraints and allows for extended USB connections in plenum space.Part No. 11U2-51035 -
Normal USB specifications limit connections to a maximum run of only 15ft. This can make placement of USB devices difficult, especially when longer runs are required in schools, conference rooms and other spaces that require a plenum cable. This 25 foot Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. This Plenum USB Extender Cable eliminates the USB length constraints and allows for extended USB connections in plenum space.Part No. 11U2-51025 -
Our 15 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02115BK -
Our 10 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02110BK -
Our 6 foot USB mini cable features a USB type A male connector on one end and a Mini-B 4 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02106BK-4 -
Our 6 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02106BK -
Our 3 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02103BK -
Our 1 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02101BK -
Our 3 foot USB A to C cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any computer, laptop, wall wartt/charging block or other device which uses the older style rectangular port that is known as the USB A port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 3.1 specification.Part No. 10U3-32003 -
Our black 10 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03110BK -
Our blue 10 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03110 -
Our black 6 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03106BK -
Our blue 6 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers, card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03106 -
Our black 3 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03103BK -
Our blue 3 foot micro USB 3.0 SuperSpeed Type A male to micro Type B Male cables offer the next great leap in data transfer speeds for your devices that require a male Micro B connection. Examples of products that use this cable type are portable USB 3.0 hard drives, USB 3.0 hubs, USB 3.0 Bluetooth speakers (charging), USB 3.0 flash card readers, card readers and more. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-03103 -
This 10ft black USB 3.0 SuperSpeed printer/device cable offers the next great leap in data transfer speeds for your peripherals. These USB 3.0 cables feature a type-A Male (Computer/Tablet/Laptop/Hub side) to type-B Male (device side, looks square). This USB SuperSpeed cable has the ability to connect a printer, scanner an external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification features awesome performance improvements while still supplying full backwards compatibility with previous USB versions. The new Sync-N-Go technology minimizes user wait time (devices detect and sync faster) and USB 3.0 is bi-directional allowing information transfers in both directions at the same time. The 3.0 specification features awesome performance improvements while still supplying full backwards compatibility with previous USB versions. The new Sync-N-Go technology minimizes user wait time (devices detect and sync faster) and USB 3.0 is bi-directional allowing information transfers in both directions at the same time.Part No. 10U3-02210BK -
Our blue 10 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02210 -
Our black 6 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02206BK -
Our blue 6 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02206 -
This 3 foot USB 3.0 SuperSpeed printer/device cable offers the next great leap in data transfer speeds for all of your peripherals. These feature a Type A Male (Computer/Tablet/Laptop/Hub to Type B Male (squared device side). This USB SuperSpeed cable enables connection from a computer, laptop, netbook or notebook to a printer, scanner or external hard drive. This cable is compatible with Windows, Mac, Android and Linux. USB 3.0 is fully backwards compatible. This cable comes in standard black.Part No. 10U3-02203BK -
Our blue 3 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02203 -
Our black 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110EBK -
Our blue 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110E -
Our black 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110BK -
Our blue 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110 -
Our blue 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106E -
Our black 6 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106BK -
Our black 3 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103EBK -
Our blue 3 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103E -
Our black 3 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103BK -
This 3 foot cable allows you to connect a device with a USB C output to a display with a DisplayPort input. Supports resolutions up to 1080p and transmission speeds using USB 3.1 Gen1 specifications.Part No. 10U2-36003 -
This 6 foot cable allows you to connect a device with a USB C output to a display with a DVI input. Supports resolutions up to 1080p and transmission speeds using USB 3.1 Gen1 specifications.Part No. 10U2-35006 -
This 3 foot cable allows you to connect a device with a USB C output to a display with a DVI input. Supports resolutions up to 1080p and transmission speeds using USB 3.1 Gen1 specifications.Part No. 10U2-35003
-
This cable takes advantage of the latest USB standard, USB Type-C Alternate Modes, to bring you a simple video cable for your device, be it the newest Galaxy, Android tablet, MacBook, or PC laptop. If your device has a USB-C port look for the USB trident. Next to the trident will be the DP symbol (the P will be in the D.) With this port, streaming on a big screen is as easy as plugging the USB-C end into your device and the HDMI end into your display. There are no drivers to install, it just works! For those interested in technical details, the cable works because VESA decided to release DisplayPort over USB-C in order to make the newest connector on the universal serial bus even more universal. This standard that they developed keeps all the good of USB SuperSpeed and augments it with DisplayPort A/V which includes 4K HDMI! Please note that not all USB C equipped devices allow video out via a cable like this. Please check the specifications on your device to ensure it is capable. Hint look for the USB trident logo with DisplayPorts D logo next to it. If that does not work you can always check the manual for DisplayPort over USB-C or use the Google, you can try asking in over live chat or by phone but please be prepared to supply the make and model of your device.Part No. 10U2-34010 -
This cable takes advantage of the latest USB standard, USB Type-C Alternate Modes, to bring you a simple video cable for your device, be it the newest Galaxy, Android tablet, MacBook, or PC laptop. If your device has a USB-C port look for the USB trident. Next to the trident will be the DP symbol (the P will be in the D.) With this port, streaming on a big screen is as easy as plugging the USB-C end into your device and the HDMI end into your display. There are no drivers to install, it just works! For those interested in technical details, the cable works because VESA decided to release DisplayPort over USB-C in order to make the newest connector on the universal serial bus even more universal. This standard that they developed keeps all the good of USB SuperSpeed and augments it with DisplayPort A/V which includes 4K HDMI! Please note that not all USB C equipped devices allow video out via a cable like this. Please check the specifications on your device to ensure it is capable. Hint look for the USB trident logo with DisplayPorts D logo next to it. If that does not work you can always check the manual for DisplayPort over USB-C or use the Google, you can try asking in over live chat or by phone but please be prepared to supply the make and model of your device.Part No. 10U2-34006 -
This cable takes advantage of the latest USB standard, USB Type-C Alternate Modes, to bring you a simple video cable for your device, be it the newest Galaxy, Android tablet, MacBook, or PC laptop. If your device has a USB-C port look for the USB trident. Next to the trident will be the DP symbol (the P will be in the D.) With this port, streaming on a big screen is as easy as plugging the USB-C end into your device and the HDMI end into your display. There are no drivers to install, it just works! For those interested in technical details, the cable works because VESA decided to release DisplayPort over USB-C in order to make the newest connector on the universal serial bus even more universal. This standard that they developed keeps all the good of USB SuperSpeed and augments it with DisplayPort A/V which includes 4K HDMI! Please note that not all USB C equipped devices allow video out via a cable like this. Please check the specifications on your device to ensure it is capable. Hint look for the USB trident logo with DisplayPorts D logo next to it. If that does not work you can always check the manual for DisplayPort over USB-C or use the Google, you can try asking in over live chat or by phone but please be prepared to supply the make and model of your device.Part No. 10U2-34003
-
Our 3 foot USB C to Micro USB cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any device that uses the micro USB port that is known probably known as the phone charger port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 2.0 specification.Part No. 10U2-33003 -
Our Black 15 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backwards compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03115BK -
Our Black 6 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03106BK -
Our 3ft Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro type-B male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB micro B connection is a very commonly used connection on cell phones, GPS units, and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03103BK -
Our Black 1 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03101BK -
Our Black 6 inch Micro USB Cable is perfect for the purse or the pocket and goes well with portable battery-based chargers. It meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03100.5BK -
This is a black 15 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02215BK -
This is a 15 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02215 -
This is a black 10 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02210BK -
This is a 10 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02210 -
This is a black 6 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02206BK -
This is a 6 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02206 -
This is a black 3 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02203BK -
This is a 3 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02203 -
This is a black 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02201BK -
This is a 1 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02201 -
This Black 15 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02115EBK -
This 15 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02115E -
This is a 15 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02115 -
This 10 foot black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02110EBK -
This 10 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02110E -
This is a black 10 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02110BK -
This is a 10 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02110 -
This 6 foot black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02106EBK -
This 6 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02106E -
This is a black 6 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02106BK -
This is a 6 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02106 -
This 3 foot black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02103EBK -
This 3 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02103E -
This is a black 3 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02103BK -
This cable has matching A-Type USB 2.0 connectors on both ends. This style is typically found on the backs of PCs, and not the standard configuration for a USB cable. Please double check and make sure the device you are connecting to requires Type A Male cables, as the port should be a Type-A female. USB 2.0 cables are backwards compatible. This cable is usually used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, and network connections.Part No. 10U2-02103 -
This 1ft black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02101EBK -
This 1 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02101E -
This device provides a simple and easy way to connect serial devices to a USB port. With the advantage of a USB port, users have the capability to utilize a peripheral with a serial port interface and are plug and play and feature hot swap functions. This adapter is perfect for connections to serial devices with over a 1 Mbps data transfer rate. Cable is 3 feet long.Part No. 10U1-06103 -
This 3 foot black FireWire 800 (IEEE-1394b) cable features a 9 pin connector on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 800 Cables meet the specifications outlined in the IEEE-1394b standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: 3200 Mbit/s (400 megabytes/s) and the older S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-99003BK -
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connector on one end and a 4 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-02106 -
This 15 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connectors on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports powering/charging over FireWire.Part No. 10E3-01115 -
- 5 Slots to provide access to the most popular types of memory card
- Slot 1: Compact Flash (including CF UDMA)
- Slot 2: Memory Stick
- Slot 3: SD & Mini-SD
- Slot 4: MicroSD & TransFlash
- Slot 5: xD
- Supports the fastest card variants such as SDHC, SDXC and CF UDMA
- Supports maximum of SDXC or CF UDMA 64GB
- SuperSpeed USB 3.0 data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0/1.1
- Includes a 50cm USB 3.0 Cable
- Dimensions: 74 x 60 x 18mm (WxDxH)
Part No. 43150 - 5 Slots to provide access to the most popular types of memory card
-
- For installation on the front of your computer in an available 3.5″drive bay
- No driver installation required - Plug & Play
Part No. 43146 -
- USB 3.0 SuperSpeed up to 5Gbps
- USB 2.0 and 1.1 compatible
- Suitable for 2.5″ and 3.5″ SATA lII HDDs/SSDs* and 5.25″ ODD drives
- Compliant to SATA III Specification
- Plug and Play
- Compatible with Windows XP/Vista/7, Mac OSX 10.8 and Linux
* Please Note: This product does not directly support 3.3V HDD/SSD, to use drives which require 3.3V please use our SATA/Micro SATA AdapterPart No. 43119 -
- Stylish miniature 4 port USB 2.0 Hub with integrated cable
- Space saving design - ideal for use with desktop and notebook computers
- Easy "Plug & Play" installation and operation
- 4 downstream ports with automatic connectivity and speed detection
- Bus powered from the computer, or self powered using an optional power supply
- Compatible with all USB 2.0 and USB 1.1 enabled computers and devices
- Dimensions: 40 x 70 x 25mm (WxDxH)
If you have a USB 1.1 interface in your PC or Mac, this hub is fully backwards compatible, allowing you to use your existing peripherals whilst remaining 'future proof' when you upgrade to a high speed USB 2.0 interface.Part No. 42998 -
- 5 Slots for over 80 types of memory cards
- Slot 1: Compact Flash
- Slot 2: Memory Stick
- Slot 3: SD & Mini-SD
- Slot 4: MicroSD & TransFlash
- Slot 5: xD
- Supports maximum of SDHC 32GB
- Dedicated SIM Card Slot
- High speed USB 2.0 data transfer rate up to 480Mbit/s
- Integrated USB A plug
- USB Extension Cable (AM-AF), approx. 90cm
- Supports PC & Mac* Software to edit the data stored on the SIM card
- Dimensions: 67 x 40 x 13mm (WxDxH)
*SIM maps are not supported by MacPart No. 42982 - 5 Slots for over 80 types of memory cards
-
- Installs into a standard 3.5" floppy drive bay and connects to the motherboard's USB connection
- USB 2.0 interface, backwards compatible with USB 1.1
- Supplied with 3 mobile data trays
- 2.5" IDE HDD Enclosure (drive not included)
Part No. 42977 -
- USB 2.0 to Fast Ethernet Adapter (also known as a USB to Cat5 / USB to RJ-45 adapter)
- Converts a USB 2.0 port into an auto-sensing 10Base-T or 100Base-TX Fast Ethernet port
- Easy plug & play installation
- Backwards compatible with USB 1.1 and 1.0 host controllers
- Both full and half duplex modes supported
- Bus-powered from USB port
- Activity LED
- Compatible with ME/2000/XP/Vista/7/8, Mac OS X, Linux
- 2 year warranty
Part No. 42974 -
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
Part No. 42961 -
- This cable works in conjunction with Vista's 'Windows Easy Transfer' software to quickly and easily copy data between two computers. It's ideal for XP users who have purchased a new Vista equipped PC and need to transfer their email messages and settings, program data, photos, files etc. It's also especially useful in an IT support environment as a link between two Vista PCs to copy files and settings.
-
- Works automatically with Vista's built-in 'Windows Easy Transfer' software
-
- Allows connection between an XP PC and a Vista PC, or between two Vista PCs
-
- Much neater, more convenient solution than using CDs, DVDs, Flash Drives or external hard drives to transfer data
-
- Very quick and easy to setup and use; allows you to transfer:
-
- User accounts
-
- Files and Folders
-
- Email messages, settings and contacts
-
- Photos, music and videos
-
- Program data, files and settings
-
- Internet settings
-
- USB 2.0 compliant
-
- Compatible with Windows XP/Vista and 7
-
- Length: 2.6m
Please note:- This cable can be used to connect a Vista PC to either an XP PC or another Vista PC only. It cannot be used to connect two XP PCs together.
Part No. 42951 -
-
More InformationThis card reader supports the following memory cards:Compact Flash (CF), Micro Drive (MD), Smart Media (SM), xD Picture Card (xD), MultiMediaCard (MMC), MMC Plus, Secure Digital (SD), Secure Digital High Capacity (SDHC), High Speed SD, Memory Stick (MS), High Speed MS, MS-Pro, High Speed MS-Pro, Mini SD, MS Duo, MS Pro-Duo, RS-MMC, MMC mobile, T-Flash*, MMC-ROM, MMC Plus ROM, MMC Mobile ROM, MS ROM, MS-Pro ROM, SM ROM* An adapter is required which is not included. Usually supplied with the memory card.Part No. 42939 -
- Ideal for USB printer sharing
- Combine with a USB hub to share multiple devices e.g. printers, scanners, etc.
- "Plug & Play"
- Supports high speed (480Mbit/sec), full speed (12Mbit/sec) and low speed (1.5Mbit/sec)
- Bus-powered with no external power supply required
- Electronic switching via push button or from the PC keyboard hotkeys (hotkey switching is not available for Mac and SUN computers)
- Connectors: 1 x USB Type A Female (USB Device) and 4 x USB Type B Female (Computer)
- Maximum cable lengths: 2m (input), 2m (output)
- A Type A to Type B USB cable (not included) is required for each computer and device connection
- Compatible with Windows 95(OSR2.1)/98/ME/2000/XP/Vista, Mac OS 8.6 to 9.2 & 10 and SUN computers
2 Port USB 2.0 Switch also availablePart No. 42904 -
- Connects to any serial RS422 device via USB Type A
- 9 Way D Male to USB A Male connectors
- Plug & Play - USB bus-powered with no external power supply required
- Compatible with Windows, Mac and Linux operating systems
- 2 year warranty
The Lindy USB to Serial Converter allows simple connection of peripheral devices featuring 9 Way Serial RS422 to a USB Type A port. With both USB Type A and serial connectors, this device is a perfect solution for connecting legacy RS422 equipment such as barcode scanners and industrial devices to notebooks and Macbooks, in retail, IT and digital signage scenarios.
This converter is compatible with Windows, Mac and Linux operating systems. It supports hot-swapping so the user can quickly switch serial devices without shutting down their computer. The converter is USB bus-powered, it can be installed quickly and simply with no need for additional power supplies.
" -
Print from your USB ready PC to a parallel printer! This USB to Parallel adapter allows any Windows compatible PC with USB support to print to any bi-directional printer equipped with a 36 way Centronics Female parallel port.Part No. 42813 -
- Extends a single USB port up to 50m using low cost Cat.5/5e/6 network cable (not included)
- Supports data transfer rates of up to 12Mbps
- Plug and Play Installation, OS independant
- Powered by the USB Bus
- 2 year warranty
The Lindy Cat.5 USB Extender can be used to extend the distance between a USB device and a host computer by up to 50m. It consists of a local unit, which can be connected to the computer or laptop and a remote unit which connects to USB devices including webcams and storage devices, perfect for long distance access to files or in video conferencing scenarios.
Standard, low cost Cat.5e/6 cable (not included) is used to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables.
A power supply can be connected optionally for use with high current USB devices.
" -
- High performance hub with active cable that provides an extended 12m connection between a computer and up to 4 USB 2.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This hub features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- High performance, active cable that provides an extended 12m connection between a computer and USB 2.0 device
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Cable Pro is a high performance active cable that allows access to USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension cable can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m
.
The 8m and 12m cable, and the 8m and 12m hub, feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- High performance hub with active cable that provides an extended 8m connection between a computer and up to 4 USB 2.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension hub is perfect for transferring data volumes quickly and reliably.
This 8m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable, and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- Easy to install smart card reader compatible with a variety of computer operating systems
- Supports smart card operations for digital signature, authentication security etc.
- Compatible with corporate ISO 7816 smart card applications
- USB 2.0 High Speed data rates up to 480Mbps
- 2 year warranty
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
" -
- Compliant with USB 2.0 specification
- Can be used as mirror or extended desktop
- Resumes from hibernation and suspend modes
- Supports up to 6 additional connections
- DisplayLink Chipset
- Easy to install - no need to open the computer case
- Supports resolutions up to 1080p (see full list below)
- Bus powered
- Compatible with Windows 2000/XP/Vista/ 7 (32/64bit) & 8, Mac OS 10.4
- 2 year warranty
Part No. 42744 -
- Supports DVI and VGA Displays
- USB 2.0 Compliant (USB 1.1 not supported)
- Up to 6 adapters can be connected to one PC
- Bus Powered
- Displaylink chipset
- Supports Resolutions up to 2048 x 1152 (32 Bit)
- Supports video playbck up to 1080p
- Requires a minimum 1.2GHz single core processor
- Supports up to 6 USB displays simultaneously
- Hot plug: easily add or remove displays without the need for system reboot
- Windows XP/Vista/7/8 compatible
- 2 year warranty
Part No. 42728
