-
RJ45 (100Base-TX) / Fiber-SC (100Base-FX) Converter multimode 2km. We provide a complete series of media conversion solutions for flexible network extensions. The ET-9103SC media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km. Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed. The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant. Use with SC Multi-Mode - 62.5/125um or 50/125um (support up to 2km)Part No. 71F1-101SC
-
RJ12 plugs are a type of plug typically used for carrying telephone and data signals. 6P6C means that the contacts on these plugs have 6 positions in which are placed 6 gold plated contacts, a standard for RJ12 jacks. These plugs are also designed for use with stranded wire. They come in a bag of 50.Part No. 31D0-6P6CF
-
RJ11 plugs are a type of plug typically used for carrying telephone signals. 6P4C means that the contacts on these plugs have 6 positions in which are placed 4 gold plated contacts, a standard for RJ11 jacks. These plugs are also designed for use with stranded wire. These come in a bag of 50.Part No. 31D0-6P4CS
-
If you have been searching for a reliable keystone jack for your 110 type connections, look no further than the Red Cat5e RJ45 Keystone Jack from . This versatile jack can be used in your home or office network, and it is easy to install due to its toolless design. You can even use this jack with our patch panels, wall plates, and surface mount boxes. Because we only offer high-quality products, you can expect this keystone jack to hold up over time. In fact, it features gold connectors that help prevent against corrosion, as well as thermoplastic ABS housing. With 8 contacts, pure copper conductors, and the ability to work with any type of network, there are more than a couple of reasons why you should order this keystone jack today. Please contact if you need any assistance!Part No. 311-120RD
-
Rackmount Telco Shelf, 19 inch Rack 22 inch deep 2 Piece. The 2 Piece Telco Rack Shelves are part of the medium duty line of rack shelves. This shelf is specially made to be a perfect fit for any 2-post rack. Simply bolt one shelf to each side of any 2-post rack. These 2 Piece Telco Rack Shelves have 4 mounting holes per U space, rounded corners, and a 200 pound total weight capacity.Part No. 61S2-14101
-
Rackmount Stationary Keyboard Tray 19 inch Rack 8 inch deep. Stationary Keyboard Trays are a great way to mount keyboards to any 19 inch EIA Compliant open rack system. It is 8" deep and 1.7" high. This strong and lightweight unit keeps the keyboard stable when in use, and the low profile design saves space. The Stationary Keyboard Tray mounts to the front of any 19 inch rack and allows quick easy access to the keyboard. It is perfect for our portable modular racks, 4-post open frame racks, and our 2-Post Cable Cove Rack.Part No. 61S2-16101
-
Struggling to punch down keystones is a thing of the past when you use this handy punch down stand. Keystones can rock when trying to punch down on a flat surface and that can cause you to damage the keystone. This punch down stand provides a secure and sturdy platform to punch down on. The three different positions will hold standard keystones, 180° keystones, and Australian-type keystones.Part No. 3010-00100
-
- Configuration/administration:
via Web interface
- Operating systems/network environments:
Win ME/NT4.0/2000/XP/Vista,7, SCO-Unix and Linux, Novell Netware(Bindery and NDS), Mac OS
- Network protocols:
TCP/IP, IPX/SPX, NetBEUI, LPR, RAW TCP, SMB over TCP/IP and AppleTalk.
- Administration protocols
HTTP, DHCP (as client), SNMP
Part No. 42395 -
- IEEE 802.3af compliant
- Input: 100-240V AC 50/60Hz 0.4A
- Output: 48V DC 16W (Max)
- LED indicators for Link, Activity, and Error
- Autosensing, detects when a compatible device is connected and turns on
- Protection circuit detects short circuit, overload and automatically turns off
- Uses standard RJ45 connections
- Operating distance: Up to 90m
- Operating distances may vary depending on the cable type used and the power requirements of the connected device
- Ideal for use with existing installations where additional power cables cannot be installed easily
- 2 Year warranty
Note: This POE Injector may also be used in conjunction with our POE Splitter (sold separately) for powering non POE devices such IP cameras, access points and wireless routers.Part No. 25052 -
Our white plenum shielded solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white shielded bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 14X6-591NH
-
Fast data transfers and high reliability come with this CMP-rated Cat6 gray Ethernet patch cable. This 50-foot bootless UTP patch cable will easily connect a Cat6 male plug to a Cat6 male plug. This cable meets TIA/EIA-568-B.2 standards, is UL-rated and RoHS compliant. Our Cat6 Ethernet patch cable also comes with peace of mind in its CMP-rated polyvinyl chloride (PVC) outer jacket that has fire-retardant properties to minimize the spread of flames in the event of a fire.Part No. 11X8-12150
-
These Platinum Tools EZ RJ45 Cat5e Crimp Plugs (Slide Through Wires) are designed to be used with CAT5e cables, both solid and stranded. Comes in 500 Pieces. Details
- Max Cable Outer Diameter: 0.240” (6.09mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 105003 -
Platinum Tools shielded Cat6a RJ45 Crimp Connectors are designed for use with solid shielded Cat6a cable. So when you are ready to deploy a shielded 10 Gigabit network or merely the infrastructure for one look no further. These connectors are composed of two pieces, the RJ45 modular plug and a wire guide insert which helps keep the individual conductors in the appropriate alignment. Please be advised that this connector is only compatible with the Platinum Tools Tele-TitanXg and Tele-TitanXg 2.0 Crimp Tool. Details
- Max cable OD: 8.5mm/0.335"
- Max conductor OD: 1.35mm/0.053"
- Individual conductor OD range: 0.042” - 0.053” (1.07mm-1.35mm)
- Wire gauge range (AWG) 24—22
- Designed for both shielded and unshielded cabling
- 50µ Gold Contacts
- UL and RoHS compliant
Part No. 106190 -
The primary tool for all telecom and network installers working with RJ45, RJ11, RJ12 & RJ22(Handset) modular plugs. Three crimp cavities for 4, 6 & 8 position modular plugs. Rugged PVC handles and all steel frame with rust resistant oxide finish will ensure years of usability. Built-in cable strippers for both flat cable and round cable help to make this a great all-in-one tool for the professional telecom or network installer and the ease of use is great for the DIYer in your life.Part No. 12503C
-
Ideal for electrical, telephone and datacom projects and applications. These scissors easily cut 12 AWG stranded wire, 16 AWG solid wire, and kevlar such as that found in fiber optic cable. The blade is notched for stripping 19 to 23 AWG wire and features a serrated edge for cleaning binding posts and wire.Part No. 10525C
-
This Platinum Tools PRO-Strike Punchdown Tool w/Combo Blade at is designed for all telecom and datacom installers working with 110, 66, Krone and BIX style cross connects. For use with: Coax CCS, Coax, CAT5E UTP/STP, CAT6 UTP/STP, CAT6A UTP/STP, Shipboard, Battery, Messenger, Antenna, DBS, Drop, Ground.Part No. 13159C
-
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C
-
This ezEX48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6a and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100029C
-
Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)Part No. 202048J
-
This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100028C