Part No. 100021C
-
The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs. -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details- For use with CAT5e/6+ shielded cable
- For solid round or stranded wire cables.
- Max Cable OD: 7.11mm (0.280")
- Max Insulated wire OD: 1.016mm (0.040")
- UL Rated, FCC compliant
- TAA Compliant
Part No. 105022 -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details- EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
- Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
- For solid round or stranded wire cables.
- Made in the USA
- TAA Compliant
Part No. 105020 -
The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.Part No. 100023C -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
- Max Outer Diameter: 0.305” (7.75mm)
- Solid or Stranded 23-22 AWG
- 50 micron gold plated contacts
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105029 -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 - 1.22mm)Part No. 202052J -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame and EXO-EX Die (100061C). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.028” (7.1mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105027 -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.305” (7.75mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105028 -
Platinum Tools ezEX-RJ45 shielded connectors with internal ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part] This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.280"(7.1mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (0.99 - 1.12mm)Part No. 202050J -
This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100028C -
Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)Part No. 202048J -
This ezEX48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6a and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100029C -
Get your cables together the quick and professional way with Platinum Tools Heavy Duty Cable Tie Gun. This tool works with both standard and heavy duty cable ties, giving you a tailored look every time. Comes in clamshell packaging.Part No. 10200C -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
This Platinum Tools PRO 6-in-1 Screwdriver is designed to be used for extended periods of time without causing hand fatigue. Multiple bits: Phillips: 1,2, Slotted: 3/16, Nut Drivers 1/4.Part No. 19002C -
This Platinum Tools Pro Drywall Saw has teeth that are precision ground for fast and effortless cutting in both directions, push and pull. This saw is ideal for cutting drywall, plaster board, plastic paneling, plywood, wallboard and ceiling tile.Part No. 10711C -
This Platinum Tools PRO-Strike Punchdown Tool will provide precise and reliable terminations that will ensure that your installations pass certification the first time, every time. Comes in clamshell packaging.Part No. 13156C -
This Platinum Tools PRO-Strike Punchdown Tool w/Combo Blade at is designed for all telecom and datacom installers working with 110, 66, Krone and BIX style cross connects. For use with: Coax CCS, Coax, CAT5E UTP/STP, CAT6 UTP/STP, CAT6A UTP/STP, Shipboard, Battery, Messenger, Antenna, DBS, Drop, Ground.Part No. 13159C -
Ideal for electrical, telephone and datacom projects and applications. These scissors easily cut 12 AWG stranded wire, 16 AWG solid wire, and kevlar such as that found in fiber optic cable. The blade is notched for stripping 19 to 23 AWG wire and features a serrated edge for cleaning binding posts and wire.Part No. 10525C -
This Platinum Tools ProStrip 10/20 Wire Stripper is color-coded for quick identification and delivers reliable results. The tools can be used left or right handed - wire sizes are marked on both sides. Curved cutting blades ensure cleaner, precise cuts. Comes in clamshell packaging.Part No. 15003C -
This Platinum Tools ProStrip 16/30 Wire Stripper will cut and strip 16-30 AWG solid and 18-32 AWG stranded, as well as cutting and chasing threads on a 16/32 & 8/32 bolt.Part No. 15005C -
This Platinum Tools Replacement Blade Cassette for PN 15041C is a cable and wire stripper/cutter, and works with most cable types/sizes. Comes with clamshell packaging.Part No. 15042C -
The primary tool for all telecom and network installers working with RJ45, RJ11, RJ12 & RJ22(Handset) modular plugs. Three crimp cavities for 4, 6 & 8 position modular plugs. Rugged PVC handles and all steel frame with rust resistant oxide finish will ensure years of usability. Built-in cable strippers for both flat cable and round cable help to make this a great all-in-one tool for the professional telecom or network installer and the ease of use is great for the DIYer in your life.Part No. 12503C -
Platinum Tools shielded Cat6a RJ45 Crimp Connectors are designed for use with solid shielded Cat6a cable. So when you are ready to deploy a shielded 10 Gigabit network or merely the infrastructure for one look no further. These connectors are composed of two pieces, the RJ45 modular plug and a wire guide insert which helps keep the individual conductors in the appropriate alignment. Please be advised that this connector is only compatible with the Platinum Tools Tele-TitanXg and Tele-TitanXg 2.0 Crimp Tool. Details- Max cable OD: 8.5mm/0.335"
- Max conductor OD: 1.35mm/0.053"
- Individual conductor OD range: 0.042” - 0.053” (1.07mm-1.35mm)
- Wire gauge range (AWG) 24—22
- Designed for both shielded and unshielded cabling
- 50µ Gold Contacts
- UL and RoHS compliant
Part No. 106190 -
This Platinum Tools SealSmart II Compression Crimp Tool works with all compression connectors on the market today and will crimp all standard F, RCA, BNC, and right-angle compression style connectors.Part No. 16220C -
These Platinum Tools EZ RJ45 Cat5e Crimp Plugs (Slide Through Wires) are designed to be used with CAT5e cables, both solid and stranded. Comes in 500 Pieces. Details- Max Cable Outer Diameter: 0.240” (6.09mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 105003 -
Fast data transfers and high reliability come with this CMP-rated Cat6 gray Ethernet patch cable. This 50-foot bootless UTP patch cable will easily connect a Cat6 male plug to a Cat6 male plug. This cable meets TIA/EIA-568-B.2 standards, is UL-rated and RoHS compliant. Our Cat6 Ethernet patch cable also comes with peace of mind in its CMP-rated polyvinyl chloride (PVC) outer jacket that has fire-retardant properties to minimize the spread of flames in the event of a fire.Part No. 11X8-12150 -
Plenum Shielded Cat6a Bulk Black Ethernet Cable, Solid, CMP, 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-522NH -
Our white plenum shielded solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white shielded bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 14X6-591NH -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60390 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60391 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- IEEE 802.3af compliant
- Input: 100-240V AC 50/60Hz 0.4A
- Output: 48V DC 16W (Max)
- LED indicators for Link, Activity, and Error
- Autosensing, detects when a compatible device is connected and turns on
- Protection circuit detects short circuit, overload and automatically turns off
- Uses standard RJ45 connections
- Operating distance: Up to 90m
- Operating distances may vary depending on the cable type used and the power requirements of the connected device
- Ideal for use with existing installations where additional power cables cannot be installed easily
- 2 Year warranty
Note: This POE Injector may also be used in conjunction with our POE Splitter (sold separately) for powering non POE devices such IP cameras, access points and wireless routers.Part No. 25052 -
Premium 5 inch Flush Cutter Tool For Wires Up To 18AWG -
- Configuration/administration:
via Web interface
- Operating systems/network environments:
Win ME/NT4.0/2000/XP/Vista,7, SCO-Unix and Linux, Novell Netware(Bindery and NDS), Mac OS
- Network protocols:
TCP/IP, IPX/SPX, NetBEUI, LPR, RAW TCP, SMB over TCP/IP and AppleTalk.
- Administration protocols
HTTP, DHCP (as client), SNMP
Part No. 42395 -
ProSeries Heavy Duty RJ45 Crimp Tool for all S45 brand UTP & STP RJ45 Modular Plugs -
ProSeries Pass Through Cat6/6a STP Starter Kit, 1ea (S45-1750P, S45-C101, S45-801, S45-S01YL , S45-B003) -
ProSeries Pass Through Cat6/6a UTP Starter Kit, 1ea (S45-1700P, S45-C101, S45-801, S45-S01YL , S45-B002) -
Punch Down Impact Tool For 66 and 110 Type Blocks, Adjustable, Yellow -
Struggling to punch down keystones is a thing of the past when you use this handy punch down stand. Keystones can rock when trying to punch down on a flat surface and that can cause you to damage the keystone. This punch down stand provides a secure and sturdy platform to punch down on. The three different positions will hold standard keystones, 180° keystones, and Australian-type keystones.Part No. 3010-00100 -
Purple RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-PU -
Rackmount 24 Port Shielded Cat6a Patch Panel, Horizontal, 110 Type, 568A & 568B Compatible, 1UPart No. 69BK-56024 -
Rackmount Fixed Wall Mount Cabinet, Solid Door, 12UPart No. 61C3-11212 -
Rackmount Patch Panel Hinged Wall Bracket, 7U, 12.5 (H) x 19 (W) x 12 (D) inches. This 7U Rackmount Patch Panel Hinged Wall Bracket has dimensions of 12.5 (H) x 19 (W) x 12 (D) inches and is the perfect addition to any rackmount set-up.Part No. 68BP-2107U -
Rackmount Stationary Keyboard Tray 19 inch Rack 8 inch deep. Stationary Keyboard Trays are a great way to mount keyboards to any 19 inch EIA Compliant open rack system. It is 8" deep and 1.7" high. This strong and lightweight unit keeps the keyboard stable when in use, and the low profile design saves space. The Stationary Keyboard Tray mounts to the front of any 19 inch rack and allows quick easy access to the keyboard. It is perfect for our portable modular racks, 4-post open frame racks, and our 2-Post Cable Cove Rack.Part No. 61S2-16101 -
Rackmount Telco Shelf, 19 inch Rack 22 inch deep 2 Piece. The 2 Piece Telco Rack Shelves are part of the medium duty line of rack shelves. This shelf is specially made to be a perfect fit for any 2-post rack. Simply bolt one shelf to each side of any 2-post rack. These 2 Piece Telco Rack Shelves have 4 mounting holes per U space, rounded corners, and a 200 pound total weight capacity.Part No. 61S2-14101 -
Cat5e Keystone Jack, Red, RJ45 Female to 110 Punch Down
