Part No. 13X8-59103
-
This 3-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference. -
This 5-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-59105
-
This 7-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-59107
-
This 15-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.Part No. 13X8-59115
-
Plenum Cat6a Orange Ethernet Cable, Solid, CMP, UTP (Unshielded Twisted Pair), 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-031NH -
Plenum Cat6a Green Ethernet Cable, Solid, CMP, UTP (Unshielded Twisted Pair), 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-051NH -
Our blue plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated blue UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 14X6-061NH -
Plenum Cat6a Yellow Ethernet Cable, Solid, CMP, UTP (Unshielded Twisted Pair), 500Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-081NH -
Our white plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 14X6-091NH -
Plenum Shielded Cat6a Bulk Black Ethernet Cable, Solid, CMP, 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-522NH -
Plenum Shielded Cat6a Bulk Blue Ethernet Cable, Solid, CMP, 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-561NH -
Plenum Shielded Cat6a Bulk Yellow Ethernet Cable, Solid, CMP, 500 Mhz, 23 AWG, Spool, 1000 footPart No. 14X6-581NH -
Our white plenum shielded solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white shielded bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.Part No. 14X6-591NH -
This Platinum Tools ProStrip 10/20 Wire Stripper is color-coded for quick identification and delivers reliable results. The tools can be used left or right handed - wire sizes are marked on both sides. Curved cutting blades ensure cleaner, precise cuts. Comes in clamshell packaging.Part No. 15003C -
This Platinum Tools ProStrip 16/30 Wire Stripper will cut and strip 16-30 AWG solid and 18-32 AWG stranded, as well as cutting and chasing threads on a 16/32 & 8/32 bolt.Part No. 15005C -
This economical tool strips the cable jacket from Cat5/5e/6 twisted pair cables with professional results. Features a long life blade specifically designed to self-adjust to prevent nicks to the inner conductors. Works with cable diameters from 0.18" to 0.25" (4.5mm - 6.3mm).Part No. 15015C -
This Platinum Tools Double Ended Coaxial Stripper will strip a broad range of coax cables in a single step.Part No. 15020C -
This Platinum Tools BR1 Multi-Stripper is adjustable for stripping multiple cables, such as twisted Pair (Data) PVC & Plenum: Cat5e shielded; Cat6; Cat6 shielded; Cat6A shielded. Comes in clamshell packaging.Part No. 15041C -
This Platinum Tools Replacement Blade Cassette for PN 15041C is a cable and wire stripper/cutter, and works with most cable types/sizes. Comes with clamshell packaging.Part No. 15042C -
This Platinum Tools SealSmart II Compression Crimp Tool works with all compression connectors on the market today and will crimp all standard F, RCA, BNC, and right-angle compression style connectors.Part No. 16220C -
This Platinum Tools PRO 6-in-1 Screwdriver is designed to be used for extended periods of time without causing hand fatigue. Multiple bits: Phillips: 1,2, Slotted: 3/16, Nut Drivers 1/4.Part No. 19002C -
This Platinum Tools 8-in-1 Ratcheted Stubby Screwdriver fits perfectly in small, cramped spaces. This screwdriver features a six piece bit storage unit built directly into the handle, allowing you to simply unscrew the top cap and swap bits out as needed. Bits Included: Phillips 1, 2 and 3, Slotted 3/16", 1/4", Torx T15, T20 Nut Driver 1/4".Part No. 19120C -
This is a blank wall plate to cover any hole or receptacle box in your wall. These can also be used as an extra safety measure when an outlet is not in use.Part No. 200-258WH -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202003J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202010J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool [part]100054C[/part] to trim the end. The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202016J -
Platinum Tools EZ-RJ45 Cat5e Strain Relief, Clear, 100 pieces -
The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202036J -
Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)Part No. 202044J -
Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)Part No. 202048J -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)Part No. 202051J -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 - 1.22mm)Part No. 202052J -
This device will filter any noise from a phone/DSL line. Without a filter like this, your DSL or phone connection can be affected by interference and may not even work.Part No. 300-10200 -
This is a standard white phone-jack wall plate for use in home or office. It is a single gang wall plate that supports 2 lines via a single RJ11 jack (4 conductors).Part No. 300-204WH -
This white surface mount box sports two Cat5e jacks (RJ45 Female). The unit comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools. This unit can support 2 unshielded Cat5e Ethernet connections.Part No. 300-313DE -
This white surface mount box sports one Cat5e jack (RJ45 Female). The unit comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools. This unit can support 1 unshielded Cat5e Ethernet connection.Part No. 300-313SE -
This white surface mount box is designed to house up to 4 keystones of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-3144E -
This white surface mount box is designed to house up to 2 keystones of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-3146E -
This white surface mount box is designed to house up to 2 keystones of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-314DE -
This white surface mount box is designed to house 1 keystone of any type. Keystones come in many different varieties, from network jacks to HDMI couplers, BNC couplers and beyond. Networking, Home Theater and security/surveillance is all covered by this simple to install and highly dynamic surface mount box. Now your installation can a professional appearance and structure.Part No. 300-314SE -
Use this unshielded Cat6 duplex surface mount box to tidy up network installations in the home or office where wall plates are not an option. This device features two Cat6 jacks/ports. In order to install this part correctly a 110 punch down tool is suggested. The box features two cable ties to help secure the incoming Cat6 cables. Color: WhitePart No. 300-613DE -
Use this unshielded Cat6 single surface mount box to tidy up network installations in the home or office where wall plates are not an option. This device features one Cat6 jack/port. In order to install this part correctly a 110 punch-down tool is suggested. The box features one cable tie to help secure the incoming Cat6 cable. Color: WhitePart No. 300-613SE -
This white single gang surface mount box is designed for use with keystone wall plates, Decora-style wall plates, pass-through wall plates for low voltage cables, and more. This surface mountable junction box is a perfect solution when one can not or does not want to install flush mount boxes. Our product includes threaded brass inserts for the faceplate, mounting screws to secure the box to a wall or surface, and a double-sided adhesive pad if drilling holes is not an option. The back of the box features knockout patterns for feeding cables into the surface mount box.Part No. 300-626WH -
This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools.Part No. 300-66FF -
This white surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools.Part No. 300-66FF-WH -
This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools. For phone use only (Note: the color coding on the internal connections does not match Cat5e or Cat6).Part No. 300-88FF-WH -
Struggling to punch down keystones is a thing of the past when you use this handy punch down stand. Keystones can rock when trying to punch down on a flat surface and that can cause you to damage the keystone. This punch down stand provides a secure and sturdy platform to punch down on. The three different positions will hold standard keystones, 180° keystones, and Australian-type keystones.Part No. 3010-00100 -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert is a blank to be used for future planned wiring. This merely fills the hole in a Decora Plate.Part No. 301-1005
