Part No. 71F1-101SC
-
RJ45 (100Base-TX) / Fiber-SC (100Base-FX) Converter multimode 2km. We provide a complete series of media conversion solutions for flexible network extensions. The ET-9103SC media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km. Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed. The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant. Use with SC Multi-Mode - 62.5/125um or 50/125um (support up to 2km) -
Ethernet to Single Mode Fiber Optic Converter, RJ45 (100Base-TX) to Fiber-SC (100Base-FX) 20km.The 71F1-112SC SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The 71F1-112SC is able to operate in temperatures from -10 up to 55 Celsius. The converter can be used as a standalone unit or as a module.
Features- Transfers data from 10/100Base-TX copper to fiber interfaces
- Single-mode fiber with SC connector for transmission of up to 20km
- Built-in LFP (Link Fault Pass-through) (LLCF/LLR) Technology
- IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
- Dip switches for customized configuration
- Supports low-time lag transmission
- Supports the transmission of extra-long packets up to 1.6KB
- -10C to 55C operating temperature range
Part No. 71F1-112SC -
10/100/1000BASE-T to 1000BASE-SX Multi-Mode Fiber Converter (SC) Gigabit. The 72X6-02104 media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling. This Media Converter provides a 10/100/1000BaseT auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology (Link Lost Forwarding) enables the switch to shut down data transmission when the link connection has failed.Part No. 71F1-201SC -
100TX to 100FX-SC MM Converter w/PS (power source). Use this 100TX to 100FX SC Converters with PoE Injectors to allow users to connect to different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments. The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. ?The converter includes PD signature sensing and power monitoring features. ?Other advantages include over-current protection, under-current detection and fault protection input. ?The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. ?The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.Part No. 71F1-301SC -
Gigabit Ethernet LC Transceiver, 1000Base-SX- LC Duplex connection, for fiber-glass/glass fiber connections up to 500m with Multimode 62.5/125µm or 50/125µm fibers
- Compatible with IEEE-802.3z Gigabit Ethernet and ANSI specifications for Fiber Channel applications
- Compatible with all Gigabit Ethernet Switches with Mini-GBIC/SFP slots, e.g. tested with LINDY Switch 25012 und 25004 , D-Link, Extreme Networks, Coretek, Finisar, Sanway, Copleynetworks, Allnet, Foxcon, Modultek, ….
Part No. 25015 -
- 1000Base-T (copper) to 1000Base-SX/LX (fiber)
- Standards: IEEE 802.3, 802.3u, 802.3x
- Connectors: LC (fiber), RJ-45 (copper)
- fiber Type: Multi-mode
- Maximum fiber cable distance - 550m using 50/125µm multi-mode cable, 220m using 62.5/125µm multi-mode cable
- Network data transfer rate: 2000Mbps (Full-duplex)
- Auto MDI-X support for RJ-45 port connection
- Status LED for Speed, Link/Activity, Full-duplex, Power
- External power supply 5V DC, 2A
- Dimensions: 74 x 102 x 22mm (WxDxH)
