Connectors & Boots » The Connectivity Center

Platinum Tools, EZ RJ45 Cat5e Crimp Plugs, 500 Pieces

$499.95 105003

These Platinum Tools EZ RJ45 Cat5e Crimp Plugs (Slide Through Wires) are designed to be used with CAT5e cables, both solid and stranded. Comes in 500 Pieces. Details

Max Cable Outer Diameter: 0.240” (6.09mm)
Max Insulation Diameter (Conductors): 0.040” (1.016mm)
Meets ANSI/EIA/TIA/TAA specifications
Solid or Stranded, 24 – 23 AWG
UL Listed and RoHS/FCC compliant
50 micron gold plated contacts
Color: Clear/Transparent
Made in USA

Part No. 105003

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Cat6 crimp Plugs 500 pieces

$513.95 105004

The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details

Max Cable Outer Diameter: 0.275” (6.98mm)
Max Insulation Diameter (Conductors): 0.040” (1.016mm)
Meets ANSI/EIA/TIA/TAA specifications
Solid or Stranded, 24 – 23 AWG
UL Listed and RoHS/FCC compliant
50 micron gold plated contacts
Color: Clear/Transparent
Made in USA

Part No. 105004

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs, 100 Pieces

$233.95 105020

These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details

EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
For solid round or stranded wire cables.
Made in the USA
TAA Compliant

Part No. 105020

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs, 100 Pieces

$269.95 105022

These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details

For use with CAT5e/6+ shielded cable
For solid round or stranded wire cables.
Max Cable OD: 7.11mm (0.280")
Max Insulated wire OD: 1.016mm (0.040")
UL Rated, FCC compliant
TAA Compliant

Part No. 105022

Add to cart Details Quick View

Platinum Tools ezEX-RJ45 Shielded Cat5e/6 Crimp Plugs

$319.95 105027

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with CAT6 and is terminated with EXO Crimp Frame and EXO-EX Die (100061C). Details

Hi-Lo stagger to isolate each conductor
Simple one piece/pass through design, no bars or liners
Shielded 5e/6/6A compliant
Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
Max Outer Diameter: 0.028” (7.1mm)
50 micron gold plated contacts
Solid or Stranded 24-22 AWG
TAA, TIA, RoHS, UL & FCC compliant
Made in the USA

Part No. 105027

Add to cart Details Quick View

Platinum Tools ezEX-RJ45 Shielded Cat5e/6 Crimp Plugs

$319.95 105028

This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details

Hi-Lo stagger to isolate each conductor
Simple one piece/pass through design, no bars or liners
Shielded 5e/6/6A compliant
Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
Max Outer Diameter: 0.305” (7.75mm)
50 micron gold plated contacts
Solid or Stranded 24-22 AWG
TAA, TIA, RoHS, UL & FCC compliant
Made in the USA

Part No. 105028

Add to cart Details Quick View

Platinum Tools ezEX-RJ45 Cat6a Shielded Ext Ground 100 piece

$406.95 105029

Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details

Hi-Lo stagger to isolate each conductor
Simple one piece/pass through design, no bars or liners
Shielded 6/6A compliant
Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
Max Outer Diameter: 0.305” (7.75mm)
Solid or Stranded 23-22 AWG
50 micron gold plated contacts
TAA, TIA, RoHS, UL & FCC compliant
Made in the USA

Part No. 105029

Add to cart Details Quick View

RJ22 Phone/Data Crimp Connectors, 4P4C, Flat Cable, 500 pcs

$46.95 106100

Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 500 pieces

Part No. 106100

Add to cart Details Quick View

Platinum Tools EZ-RJ45 cat5e Crimp Plugs 50 pieces

$48.95 100003C

The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].

Part No. 100003C

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Cat6 crimp Plugs 10 pieces

$14.95 100009C

The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details

Max Cable Outer Diameter: 0.275” (6.98mm)
Max Insulation Diameter (Conductors): 0.040” (1.016mm)
Meets ANSI/EIA/TIA/TAA specifications
Solid or Stranded, 24 – 23 AWG
UL Listed and RoHS/FCC compliant
50 micron gold plated contacts
Color: Clear/Transparent
Made in USA

Part No. 100009C

Add to cart Details Quick View

Platinum Tools EZ-RJ45 cat6 crimp Plugs 50 pieces

$53.95 100010C

The Platinum Tools EZ-RJ45 cat5e crimp connectors are a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].

Part No. 100010C

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs

$27.95 100021C

The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.

Part No. 100021C

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Shielded Cat65e Crimp Plugs

$32.95 100023C

The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.

Part No. 100023C

Add to cart Details Quick View

Platinum Tools ezEX44-RJ45 Cat5e/6 Crimp Plugs

$53.95 100028C

This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).

Part No. 100028C

Add to cart Details Quick View

Platinum Tools ezEX48-RJ45 Cat6a Crimp Plugs

$71.95 100029C

This ezEX48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6a and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).

Part No. 100029C

Add to cart Details Quick View

RJ22 Phone/Data Crimp Connectors, 4P4C, Flat Cable, 100 pcs

$14.95 106103J

Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 100 Pieces/Jar

Part No. 106103J

Add to cart Details Quick View

EZ-RJ45 Cat5e Crimp Plugs 100 Pieces

$93.95 202003J

This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.

Part No. 202003J

Add to cart Details Quick View

EZ-RJ45 Cat6 Crimp Plugs 100 Pieces

$105.95 202010J

This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.

Part No. 202010J

Add to cart Details Quick View

Platinum Tools EZ-RJ45 Cat6/5e 50/50 Combo, Jar of 50 and 50

$79.95 202016J

This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool [part]100054C[/part] to trim the end. The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.

Part No. 202016J

Add to cart Details Quick View

Platinum Tools Cat5e/6 ezEX44-RJ45 Crimp Plugs, 100 pc

$114.95 202044J

Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)

Part No. 202044J

Add to cart Details Quick View

Platinum Tools ezEX48 RJ45 Cat6a Crimp Plugs. 100 pieces

$136.95 202048J

Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)

Part No. 202048J

Add to cart Details Quick View

Platinum Tools ezEX-RJ45 Cat5e/6 Shielded Crimp Plugs, 50 pc

$163.95 202051J

Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)

Part No. 202051J

Add to cart Details Quick View

Platinum Tools ezEX-RJ45 Cat6a Shielded Ext Ground 50 piece

$218.95 202052J

Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 - 1.22mm)

Part No. 202052J

Add to cart Details Quick View

Phone/Data RJ22 Crimp Connectors Flat Cable 4P4C

$7.95 31D0-440HD

These RJ22 4P4C Crimp Connectors are for flat telephone cables and come in bags of 100 pieces. The color is clear.

Part No. 31D0-440HD

Add to cart Details Quick View

Shielded Cat5e RJ45 Crimp Connectors 50 Piece

$16.95 31D0-51007

These crimp connectors are used to terminate a CAT-5 or CAT-5E cable. The connectors are shielded and come in a bag of 50 pieces.

Part No. 31D0-51007

Add to cart Details Quick View

Cat6 RJ45 Crimp Connectors Solid/Stranded Cable 100 Piece

$38.95 31D0-580HD

These crimp connectors are used to terminate a CAT-6 cable. The wire insertion guide is fixed inside of the connectors and cannot be removed. It features a staggered insertion as the individual wires of CAT6 are too thick to be arranged in a straight line as with CAT5E connectors.

Part No. 31D0-580HD

Add to cart Details Quick View

Cat6a RJ45 Ends, wire guide, spacer bar, for stranded 50 Pcs

$20.95 31D0-62050

These three piece Cat6a connectors make the task of terminating a stranded cable to TIA/EIA standards easy. Each bag of 50 modular connectors includes 50 spacer bars and 50 wire guides. The spacer bar exists to help maintain the twist of each pair as close to the crimp as possible. The wire guide insert helps maintain the individual conductor/wire order.

Part No. 31D0-62050

Add to cart Details Quick View

CAT6a Shielded Crimp Connectors for Stranded Cable (100 Pcs Per Bag)

$77.95 31D0-650HD

These RJ45 Cat6A Shielded Crimp Connectors work for stranded cables. These come 100 pieces per bag.

Part No. 31D0-650HD

Add to cart Details Quick View

RJ11 6P4C Modular Plug for Stranded Wire Bag of 50

$3.95 31D0-6P4CS

RJ11 plugs are a type of plug typically used for carrying telephone signals. 6P4C means that the contacts on these plugs have 6 positions in which are placed 4 gold plated contacts, a standard for RJ11 jacks. These plugs are also designed for use with stranded wire. These come in a bag of 50.

Part No. 31D0-6P4CS

Add to cart Details Quick View

RJ12 6P4C Modular Plug for Flat Wire Bag of 50

$4.95 31D0-6P6CF

RJ12 plugs are a type of plug typically used for carrying telephone and data signals. 6P6C means that the contacts on these plugs have 6 positions in which are placed 6 gold plated contacts, a standard for RJ12 jacks. These plugs are also designed for use with stranded wire. They come in a bag of 50.

Part No. 31D0-6P6CF

Add to cart Details Quick View

Cat6 Shielded Crimp Connector Stranded Cable 100 Pieces

$65.95 31X8-580HD

CAT6 Shielded Crimp Connector for Stranded Cable w/guides (100 Pcs Per Bag). These Shielded Cat6 Crimp Connectors for Stranded Cables come in bags of 100 pieces and come with guides.

Part No. 31X8-580HD

Add to cart Details Quick View

Black RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-BK

Black RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-BK

Add to cart Details Quick View

Blue RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-BL

Blue RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-BL

Add to cart Details Quick View

Gray RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-GY

Gray RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-GY

Add to cart Details Quick View

Orange RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-OR

Orange RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-OR

Add to cart Details Quick View

Purple RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-PU

Purple RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-PU

Add to cart Details Quick View

Red RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-RD

Red RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-RD

Add to cart Details Quick View

White RJ45 Strain Relief Boots, 50 Pieces / Bag

$5.95 SR-8P8C-WH

White RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.

Part No. SR-8P8C-WH

Add to cart Details Quick View

UTP Port Doubler, 1 x 10/100Base-T + 1 x Voice/Token Ring to 1 Port

$6.55 34003

Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.

Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.

Please note: these doublers are sold as single units not pairs.

1 x 10/100Base-T device and 1 x Voice or Token Ring device to 1 port
Low cost solution for adding extra connections
Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
No performance loss
Saves adding additional cable runs
Ideal for existing installations where additional cables cannot be installed easily

Part No. 34003

Add to cart Details Quick View

RJ-45 Female to Female, UTP CAT6 (Line Coupler)

$3.19 34009

RJ-45 Female to RJ-45 Female, Unshielded

"

Add to cart Details Quick View

STP Port Doubler, 2 x Voice/Token Ring to 1 Port

$8.57 34014

Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.

Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.

Please note: these doublers are sold as single units not pairs.

2 x Voice or Token Ring devices to 1 port
Low cost solution for adding extra connections
Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
No performance loss
Saves adding additional cable runs
Ideal for existing installations where additional cables cannot be installed easily

Part No. 34014

Add to cart Details Quick View

6 Way RJ-12 Cable, 50m

$20.81 34229

RJ12 Cable 6P6C
RJ12 Male (6 pin) to RJ12 Male (6 pin)
Flat Cable 6 core, Connection 1:1
Used for telecommunication connections
10 year warranty

The Lindy RJ12 Cable is a high-quality cable that allows users to connect telecommunication devices with a

RJ12 6/6 Port

The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.

The cables are packaged individually in a polybag.

RJ-12 cables are available in lengths from 2m to 50m.

"

Add to cart Details Quick View

Post-assembly RJ-45 Male Strain Relief Boot, Green (10 per pack)

$2.38 60388

Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
For cable diameters up to 6mm
Great for identification at patch panels

Part No. 60388

Add to cart Details Quick View

Post-assembly RJ-45 Male Strain Relief Boot, Yellow (10 per pack)

$2.56 60389

Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
For cable diameters up to 6mm
Great for identification at patch panels

Part No. 60389

Add to cart Details Quick View

ACCOUNT

RESOURCES

INFO

Title