Part No. 100003C
-
The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. -
The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202036J -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an external ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202022J -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an internal ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202020J -
The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.Part No. 100021C -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details- For use with CAT5e/6+ shielded cable
- For solid round or stranded wire cables.
- Max Cable OD: 7.11mm (0.280")
- Max Insulated wire OD: 1.016mm (0.040")
- UL Rated, FCC compliant
- TAA Compliant
Part No. 105022 -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details- EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
- Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
- For solid round or stranded wire cables.
- Made in the USA
- TAA Compliant
Part No. 105020 -
The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.Part No. 100023C -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)Part No. 202051J -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
- Max Outer Diameter: 0.305” (7.75mm)
- Solid or Stranded 23-22 AWG
- 50 micron gold plated contacts
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105029 -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.043" - 0.048" (1.09 - 1.22mm)Part No. 202052J -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.305” (7.75mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105028 -
Platinum Tools ezEX-RJ45 shielded connectors with internal ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part] This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.280"(7.1mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (0.99 - 1.12mm)Part No. 202050J -
The primary tool for all telecom and network installers working with RJ45, RJ11, RJ12 & RJ22(Handset) modular plugs. Three crimp cavities for 4, 6 & 8 position modular plugs. Rugged PVC handles and all steel frame with rust resistant oxide finish will ensure years of usability. Built-in cable strippers for both flat cable and round cable help to make this a great all-in-one tool for the professional telecom or network installer and the ease of use is great for the DIYer in your life.Part No. 12503C -
These Platinum Tools EZ RJ45 Cat5e Crimp Plugs (Slide Through Wires) are designed to be used with CAT5e cables, both solid and stranded. Comes in 500 Pieces. Details- Max Cable Outer Diameter: 0.240” (6.09mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 105003 -
Purple RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-PU -
These crimp connectors are used to terminate a CAT-5 or CAT-5E cable. The connectors are shielded and come in a bag of 50 pieces.Part No. 31D0-51007 -
Platinum Tools EZ-RJ45 Cat5e Strain Relief, Clear, 100 pieces -
Yellow RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-YL
