Part No. 66050
-
Screws, spacers, bolts, nuts and jumpers for PC installation personnel -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
" -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Accommodates 6 face plate modules
- Supplied with 4 x blank face plate modules
- Flip up cover with identification label
- Suitable for surface mounting
- Multiple cable entries
- Dimensions: 170 x 205 x 55mm (WxDxH)
- Color: White
- Warranty: 2 years
Note: picture shown for illustration only, the shown modules are not included.Part No. 60549 -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation" -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60391 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60390 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388 -
- RJ-45 Female to punchdown, Unshielded
- Fully compatible with Gigabit ethernet
- For use with our range of keystone patch panels
- Color: Blue
Part No. 60367 -
- Twisted Pair Patch Cable with RJ45 connectors
- Cat.6 S/FTP PIMF
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
These cables feature a crossover connection allowing two devices of the same type (PC’s, network switches) to connect to each other. Intentionally crossed wiring in the cable connects the transmission signals at one end of the cable to the receiving end.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
" -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 47034 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 47002 -
- LSOH cable
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: Grey
- 10 year warranty
Part No. 46921 -
- LSOH cable
- Full CAT6 specification with molded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: White
- 10 year warranty
Part No. 46902 -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45963 -
- Full CAT5e specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45962 -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 45926 -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 45870 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45848 -
- Full CAT6 specification with moulded snagless boots
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45815 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45804 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45800 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45788 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45787 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45786 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45785 -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45773 -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45772 -
- Full CAT6 specification with moulded snagless boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45771 -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45770 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45759 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45758 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45757 -
- Full CAT6 specification with molded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45675 -
-
- Full CAT6 specification with moulded snagless boots
-
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- 10 year warranty
Part No. 45661 -
-
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45555 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
1m CAT6 FTP LS0H Network Cable, GreyPart No. 45322 -
- Full CAT6 specification with molded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Cross Over
- 1000Base-T supported
- Color: gray cable with red connector
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 45102 -
- Full CAT6 specification with molded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Cross Over
- 1000Base-T supported
- Color: gray cable with red connector
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 45100 -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44945 -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44941 -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44940 -
10m CAT6 UTP Network Cable, RedPart No. 44852 -
-
- Full CAT6 specification with molded boots
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- 10 year warranty
Part No. 44845 -
-
-
- Full CAT6 specification with molded boots
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- 10 year warranty
Part No. 44833 -
-
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44747 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44745 -
-
- Full CAT5e specification with molded boots
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- 10 year warranty
Part No. 44723 -
-
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 44309 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 44302 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 44301 -
-
- Full CAT5e specification with moulded boots
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
-
- 10 year warranty
Part No. 44125 -
-
-
- Full CAT5e specification with moulded boots
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
-
- 10 year warranty
Part No. 44091 -
-
- Configuration/administration:
via Web interface
- Operating systems/network environments:
Win ME/NT4.0/2000/XP/Vista,7, SCO-Unix and Linux, Novell Netware(Bindery and NDS), Mac OS
- Network protocols:
TCP/IP, IPX/SPX, NetBEUI, LPR, RAW TCP, SMB over TCP/IP and AppleTalk.
- Administration protocols
HTTP, DHCP (as client), SNMP
Part No. 42395 -
- RJ12 Cable 6P6C
- RJ12 Male (6 pin) to RJ12 Male (6 pin)
- Flat Cable 6 core, Connection 1:1
- Used for telecommunication connections
- 10 year warranty
The Lindy RJ12 Cable is a high-quality cable that allows users to connect telecommunication devices with a
RJ12 6/6 Port
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time.
The cables are packaged individually in a polybag.
RJ-12 cables are available in lengths from 2m to 50m.
" -
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.Please note: these doublers are sold as single units not pairs.- 2 x Voice or Token Ring devices to 1 port
- Low cost solution for adding extra connections
- Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
- No performance loss
- Saves adding additional cable runs
- Ideal for existing installations where additional cables cannot be installed easily
Part No. 34014 -
- RJ-45 Female to RJ-45 Female, Unshielded
-
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.Please note: these doublers are sold as single units not pairs.- 1 x 10/100Base-T device and 1 x Voice or Token Ring device to 1 port
- Low cost solution for adding extra connections
- Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
- No performance loss
- Saves adding additional cable runs
- Ideal for existing installations where additional cables cannot be installed easily
Part No. 34003 -
- 1000Base-T (copper) to 1000Base-SX/LX (fiber)
- Standards: IEEE 802.3, 802.3u, 802.3x
- Connectors: LC (fiber), RJ-45 (copper)
- fiber Type: Multi-mode
- Maximum fiber cable distance - 550m using 50/125µm multi-mode cable, 220m using 62.5/125µm multi-mode cable
- Network data transfer rate: 2000Mbps (Full-duplex)
- Auto MDI-X support for RJ-45 port connection
- Status LED for Speed, Link/Activity, Full-duplex, Power
- External power supply 5V DC, 2A
- Dimensions: 74 x 102 x 22mm (WxDxH)
-
- Connects four serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 185 x 108 x 28mm (WxDxH)
- 2 year warranty
2 Port version also available, LINDY Part No. 25104Part No. 25105 -
- Connects two serial devices to a local area network
- Supports: RS-232, RS-422 & RS-485 serial devices
- 10/100 Mbps Auto-sensing Fast Ethernet port
- Configuration via:
- IP Server Management Mode for Windows
- Web Browser
- Telnet
- Tough metal housing, ideal for industrial use
- Compatible with Windows Vista/2003/XP/2000/NT/98/ME
- Dimensions: 85 x 115 x 23mm (WxDxH)
- 2 year warranty
4 Port versionalso available, LINDY Part No. 25105Part No. 25104 -
- IEEE 802.3af compliant
- Input: 100-240V AC 50/60Hz 0.4A
- Output: 48V DC 16W (Max)
- LED indicators for Link, Activity, and Error
- Autosensing, detects when a compatible device is connected and turns on
- Protection circuit detects short circuit, overload and automatically turns off
- Uses standard RJ45 connections
- Operating distance: Up to 90m
- Operating distances may vary depending on the cable type used and the power requirements of the connected device
- Ideal for use with existing installations where additional power cables cannot be installed easily
- 2 Year warranty
Note: This POE Injector may also be used in conjunction with our POE Splitter (sold separately) for powering non POE devices such IP cameras, access points and wireless routers.Part No. 25052 -
Gigabit Ethernet LC Transceiver, 1000Base-SX- LC Duplex connection, for fiber-glass/glass fiber connections up to 500m with Multimode 62.5/125µm or 50/125µm fibers
- Compatible with IEEE-802.3z Gigabit Ethernet and ANSI specifications for Fiber Channel applications
- Compatible with all Gigabit Ethernet Switches with Mini-GBIC/SFP slots, e.g. tested with LINDY Switch 25012 und 25004 , D-Link, Extreme Networks, Coretek, Finisar, Sanway, Copleynetworks, Allnet, Foxcon, Modultek, ….
Part No. 25015 -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
Yellow RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-YL -
Red RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-RD -
Purple RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-PU -
Orange RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-OR -
Gray RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-GY -
Green RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-GR -
Blue RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-BL -
Black RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-BK -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area, where only one jack is available.Part No. PA-6P6C-ST -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area where only one jack is available.Part No. PA-6P4C-ST -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having two phones and a fax machine in the same area where only one jack is available.Part No. PA-6P4C-3 -
This is a female telephone in-line style coupler. Designed to join two 8P8C phone lines together with RJ45 connectors.Part No. MC-8P8C-ST -
Female reverse-style coupler. Designed to join two 8P8C phone lines together. This has 8 pins and will reverse the right to left order of the pins.Part No. MC-8P8C-RE -
This is a straight modular in-line phone line coupler for RJ11 / RJ12. This is for extending a telephone cord and will connect two cords together.Part No. MC-6P6C-ST -
This is a reverse modular in-line phone line coupler for RJ11 / RJ12. This will extend out a telephone cord. Just simply attach to one end and add another cord and you are all set up!Part No. MC-6P6C-RE -
This 5-Port fast Ethernet switch is perfect for a home or small office network. This switch provides your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for as many as 4 users. Just plug in your Ethernet cables, connect a power cord, and you're ready to go there's no software to configure. All ports also automatically sense half or full duplex connections for high-speed server or switch-to-switch configurations.Part No. ES-3105P -
TV Wall Plate with 1 F-pin Coupler, 3GHz WhitePart No. ASF-20351WH -
This 35-Piece Screw Driver Tool Kit has you covered, no matter what the job is. In addition to the variety of screwdrivers, this kit includes: * 5" Needle Nose Pliers * 5" Side Cutter * Flexible Shaft * Stainless Tweezers * Easy Grip Screwdriver Handle Comes in a zippered storage case so you can take your tool kit on the go.Part No. 91T1-10035
