Part No. 301-2-9
-
If you are thinking about running a serial or VGA video signal through your house / office, this wall plate will work to terminate at any wall site. To complete your VGA wall plate you will need one of the following gender changers: 31H1-05100, 31H1-05200 or 31H1-05400. -
This white single gang brush style cable pass-through plate features a half moon cover for those installations where a standard brush plate is undesirable for aesthetic reasons. Once installed one can push the cables through the opening in the cover and then through the brush behind it for an impeccable entry to the inner wall.Part No. 301-6001 -
1-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0001-BK -
1-Gang Recessed Low Voltage Cable Plate, BrownPart No. 45-0001-BR -
1-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0001-LA -
1-Gang Recessed Low Voltage Cable Plate, WhitePart No. 45-0001-WH -
Split Plate with Flexible Opening, BlackPart No. 45-0017-BK -
Split Plate w- Flexible Opening, Lite Almond<-p>.
Use the lite almond split plate to install low voltage cables behind your HDTV, amplifier or other audio video devices. With the split design, this Cable Plate can be installed around existing low voltage cables run through the wall, eliminating the need to re-pull wires keeping the opening in the wall covered. The Flexible Split Plate holds up to 6 cables and mounts to our standard 1-gang low voltage mounting bracket 3031-11100.<-p>
Part No. 45-0017-LA -
Split Plate w- Flexible Opening, White<-p>.
Use the white split plate to install low voltage cables behind your HDTV, amplifier or other audio video devices. With the split design, this Cable Plate can be installed around existing low voltage cables run through the wall, eliminating the need to re-pull wires keeping the opening in the wall covered. The Flexible Split Plate holds up to 6 cables and mounts to our standard 1-gang low voltage mounting bracket 3031-11100.<-p>
Part No. 45-0017-WH -
Easy Mount Recessed Low Voltage Cable Plate, Lite Almond<-p>.
Our lite almond Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-LA -
Easy Mount Recessed Low Voltage Cable Plate Slim Fit, Lite Almond<-p>.
Our lite almond Slim Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. These slim plates require a wall depth between 3-4 and 1 inch. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0009-LA -
Easy Mount Recessed Low Voltage Cable Plate Slim Fit White<-p>.
Our white Slim Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. These slim plates require a wall depth between 3-4 and 1 inch. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0009-WH -
- RJ-45 Female to punchdown, Unshielded
- Fully compatible with Gigabit ethernet
- For use with our range of keystone patch panels
- Color: Blue
Part No. 60367 -
These Platinum Tools UY Gel-Filled Connectors (22-26 AWG) use an insulation displacement contact design for simple and reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include butt splicing two or three wires of the same or different gauges.Part No. 18121-1 -
2-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0002-BK -
2-Gang Recessed Low Voltage Cable Plate, BrownPart No. 45-0002-BR -
2-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0002-LA -
2-Gang Recessed Low Voltage Cable Plate, WhitePart No. 45-0002-WH -
Hole Saw Plate, White<-p>.
1 3-4 inch Hole Saw Plate is used to conceal low voltage cables behind smaller home theater and security equipment. The Hole Saw Plate's low profile design is ideal for concealing connections to components such as speakers, cameras, and other similar applications. Metal mounting wings are molded into the plate, creating a secure hold and eliminating the need for a mounting bracket.<-p>
Part No. 45-0006-WH -
Easy Mount Recessed Low Voltage Cable Plate, Black<-p>.
Our black Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-BK -
Easy Mount Recessed Low Voltage Cable Plate, White<-p>.
Our white Easy Mount Recessed Low Voltage Cable Plates are designed to be installed without low voltage mounting plates. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall.<-p>
Part No. 45-0008-WH -
Decora Wall Plate Insert, Brush Style Pass Through, White<-p>.
Insert is used to install low voltage cables behind your HDTV, amplifier or other audio video devices. The Brush Plate Decora Insert is designed to be installed into a low voltage mounting bracket that is installed into the wall.<-p>
Part No. 45-0018-WH -
Let CableWholesale help you set up a legendary home theater system. Our white XLR Decora wall plate male insert converts in-wall wiring for transmitting 3-pin, XLR audio to devices utilizing XLR-style audio inputs and outputs. This quality item is made from tough, durable plastic and will last for years. The back of this XLR connection is solder based - you will need to be able to solder your in-wall wiring to the Decora wall plate connections. Purchase this item with confidence - it has a lifetime warranty.Part No. 301-1004 -
- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
" -
- Single Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
These Platinum Tools UR Gel-Filled Connectors (19-26 AWG) use an insulation displacement contact design for fast and reliable terminations. No wire stripping is required, and connectors will work with wire of all different gauges. All connectors are gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include butt splicing two or three wires of the same or different gauges.Part No. 18111-1 -
This white decora brush style cable pass-through makes an excellent wall exit/entry for routing cables when one does not want or can not use coupler type Decora inserts. The brush closure allows for a fairly large cable end to be passed through into a wall or other contained space in an attractive manner, helping keep installations clean and professional.Part No. 301-1009 -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall RCA stereo cables to devices in the following situations. Conversion from in-wall RCA cables to RCA audio sources and destinations.Part No. 301-2002 -
Cable Plate with Flexible Opening, 1-Gang, BlackPart No. 45-0014-BK -
Cable Plate with Flexible Opening, 1-Gang, Lite AlmondPart No. 45-0014-LA -
Cable Plate with Flexible Opening, 1-Gang, WhitePart No. 45-0014-WH -
Shielded Cat6a Keystone Jack, Toolless, RJ45 Female -
This white Decora Wall Plate Insert is designed with a VGA coupler and three RCA couplers. It is used with a Decora style wallplate (not included).Part No. 301-4001 -
This white Decora wall plate insert works with VGA/HD15, 3.5mm and three red/white/yellow RCA couplers.Part No. 301-5000 -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall wiring for transmitting XLR audio to devices utilizing XLR style audio inputs and outputs. The back of the XLR connection is solder based so you will need to be able to solder your in wall wiring to the decora wall plates connections.Part No. 301-2005 -
These solder type Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall wiring for transmitting XLR audio to devices utilizing XLR style audio inputs and outputs. The back of the XLR connection is solder based so you will need to be able to solder your in wall wiring to the decora wall plates connections.Part No. 301-2006 -
This white RCA Decora Wall Plate Insert has three RCA Composite Video/Audio male jacks. Will fit any standard wall plate.Part No. 301-3000 -
3-Gang Recessed Low Voltage Cable Plate, BlackPart No. 45-0003-BK -
3-Gang Recessed Low Voltage Cable Plate, Lite AlmondPart No. 45-0003-LA -
Cable Plate with Flexible Opening, 2-Gang, BlackPart No. 45-0015-BK -
3-Gang Recessed Low Voltage Cable Plate, WhitePart No. 45-0003-WH -
Cable Plate with Flexible Opening, 2-Gang, WhitePart No. 45-0015-WH -
The HDMI wall plate allows you to easily route HDMI cables in from your HDMI source devices to your HDMI equipped HDTV. Featuring a mounting wall plate that will eliminate messy cables and gaping holes in the wall and provides you with a professional looking wall installation. This HDMI wall plate will fit into a standard wall mount hole, similar to an outlet or light switch. The practical design makes this wall plates an ideal solution for cable extension management.Part No. 301-HD002 -
This Platinum Tools UR Gel-Filled Splicing Connectors utilize an insulation displacement contact design for fast, simple, reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are Gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include Butt Splicing 2 or 3 wires of the same or different gauges. Perfect for pigtail and load coil splice applications.Part No. 18112C -
- USB A to A Female connectors
- Supports USB 1.1 and USB 2.0 devices
- Allows USB cables to be connected to a face plate
- USB Type A Female connections front and rear
- Suitable for use with our range of snap in blocks and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.
" -
- 3 x Phono snap in bezel
- Gold plated female connectors
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation" -
- 3.5mm Stereo keystone female to female connector
- Supplied in a pack of 2
- Suitable for use with our range of snap in bezels and wall plates
- Dimensions: 15mm x 20mm
- 2 year warranty
Please scroll down for more information about installation"
