-
Platinum Tools - UR-Gel Splice Connector, 19-26 AWG, Red, 50pc clamshell -
Platinum Tools - UY-Gel Splice Connector, 22-26 AWG, Yellow, 100 piece box -
Decora Wall Plate Insert, White, XLR Male to Solder Type -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291SF -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
This white 14 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-291SF -
This white 14 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-491SF -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF -
This black 14 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-722SF -
This 500 foot 12 AWG, 2 conductor copper speaker wire is ideal for wiring the speakers in your home theater or house to your receiver. Featuring pure copper, this speaker cable is sure to deliver all the nuances in your audio media. Cable is dispensed in a convenient pullbox.Part No. 10G4-291SF -
These Platinum Tools UR Gel-Filled Connectors (19-26 AWG) utilize an insulation displacement contact design for fast, simple, reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are Gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include Butt Splicing two or three wires of the same or different gauges. Perfect for pigtail and load coil splice applications. This eliminates cutting or opening of cable pairs. Comes 100 to a box.Part No. 18110-1 -
These Platinum Tools UY Gel-Filled Connectors (22-26 AWG) uses an insulation displacement contact design for simple and reliable terminations. No wire stripping is required and connectors will accept wire of different gauges. All connectors are gel filled to provide moisture resistance and inhibit corrosion. For use with solid copper conductors only. Typical uses include butt splicing two or three wires of the same or different gauges.Part No. 18122C -
This wall plate is used at the end of an F-Pin coax cable coming out of the wall for a clean F-Pin connection you can place anywhere.Part No. 200-253WH -
This is a blank wall plate to cover any hole or receptacle box in your wall. These can also be used as an extra safety measure when an outlet is not in use.Part No. 200-258WH -
Decora wall plate inserts are used to build a clean bridge between in-wall cable runs and their destinations. This particular insert converts in-wall coaxial cabling to a female F-Pin coupler. This is particularly useful in cable TV/Satellite in-wall installations between rooms and floors.Part No. 301-1000 -
Cleanly bridge between in-wall cable runs and their origins or destinations. Our white decora wall plate inserts feature an XLR female port in order to convert in-wall wiring to transmit XLR audio to devices using XLR style audio inputs and outputs. The back of the XLR connection is solder based - this means that it will be necessary for you to solder your in-wall wiring to the decora wall plate connections. This product will provide a lifetime of consistent sound and quality, dependable use. This wall plate insert is RoHS compliant and features a lifetime warranty.Part No. 301-1003 -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert is a blank to be used for future planned wiring. This merely fills the hole in a Decora Plate.Part No. 301-1005 -
This white decora brush style cable pass-through makes an excellent wall exit/entry for routing cables when one does not want or can not use coupler type Decora inserts. The brush closure allows for a fairly large cable end to be passed through into a wall or other contained space in an attractive manner, helping keep installations clean and professional.Part No. 301-1009 -
This dual gang Keystone wall plate features spaces for up to 12 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-12K-W -
This single gang Keystone wall plate features spaces for up to one keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean and professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics. The color is beige.Part No. 301-1K -
This white single gang Keystone wall plate features spaces for up to 1 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-1K-W -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall RCA stereo cables to devices in the following situations. Conversion from in-wall RCA cables to RCA audio sources and destinations.Part No. 301-2002 -
Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall cabling to devices in the following situations. Conversion from in-wall VGA cables to a computer/laptop or other VGA source. Or conversion from a VGA destination to in-wall wiring.Part No. 301-2004 -
Keystone Wall Plate, Black, 1 Port, Single Gang -
Keystone Wall Plate, Black, 3 Port, Single Gang -
Keystone Wall Plate, Black, 4 Port, Single Gang -
These solder type Decora wall plate inserts are used to cleanly bridge between in-wall cable runs and their origin and destinations. This particular insert converts in-wall wiring for transmitting XLR audio to devices utilizing XLR style audio inputs and outputs. The back of the XLR connection is solder based so you will need to be able to solder your in wall wiring to the decora wall plates connections.Part No. 301-2006 -
Keystone Wall Plate, Black, 6 Port, Single Gang -
Keystone Wall Plate, Brown, 1 Port, Single Gang -
Keystone Wall Plate, Brown, 3 Port, Single Gang -
Keystone Wall Plate, Brown, 6 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 1 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 2 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 3 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 4 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 6 Port, Single Gang -
This beige single gang Keystone wall plate features spaces for up to 2 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-2K -
This white single gang Keystone wall plate features spaces for up to 2 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-2K-W -
This white RCA Decora Wall Plate Insert has three RCA Composite Video/Audio male jacks. Will fit any standard wall plate.Part No. 301-3000 -
This beige single gang Keystone wall plate features spaces for up to 3 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-3K -
This white single gang Keystone wall plate features spaces for up to 3 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-3K-W -
This white Decora Wall Plate Insert is designed with a VGA coupler and three RCA couplers. It is used with a Decora style wallplate (not included).Part No. 301-4001 -
This beige single gang Keystone wall plate features spaces for up to 4 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-4K -
This white single gang Keystone wall plate features spaces for up to 4 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.Part No. 301-4K-W -
This white Decora wall plate insert works with VGA/HD15, 3.5mm and three red/white/yellow RCA couplers.Part No. 301-5000 -
This white single gang brush style cable pass-through plate features a half moon cover for those installations where a standard brush plate is undesirable for aesthetic reasons. Once installed one can push the cables through the opening in the cover and then through the brush behind it for an impeccable entry to the inner wall.Part No. 301-6001
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
