Part No. MPMP-31002
-
This 2 meter (6.6 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor. -
This 2 meter (~6.6 feet) aqua 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41002 -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-31002 -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31002 -
1U Swing Out Fiber Optic Patch Panel, Capacity 2 LGX Adapter Plates / Cassettes / Modules, Unloaded, Black Powder Coat. Our 1U Swing Out Patch Panel accommodates 2 LGX adapter plates, modules or cassettes. It is designed to house fiber terminations and accommodate patching of fiber links. The swing-out design offers easy access to cable and splices located in the patch and splice bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. These units can be flush mounted or mounted with 3.5 inch protrusion from the rack with no additional accessories. Rack mount installs into a standard 19 inch rack with included mounting hardware. Adapter panels and 23 inch telco rack mounting brackets are sold separately. Details- Swing Out Shelf
- Holds 2 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Flush Mount or 3.5 inch Protrusion; No Accessories Required
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 11.5in D x 1.75in H
Part No. 68F2-10210 -
1U Fiber Optic Patch Panel, Capacity 3 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 1RU Patch Panel provides many flexible fiber patching configurations in a 1RU form factor. It accommodates (3) LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. Rackmount installs into a standard 19-inch rack. Includes non-flush brackets for 19-inch racks. Adapter plates, 23-inch mounting brackets, and 19-inch flush mount brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low-density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our rack mount enclosures fit standard 19-inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 3 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 1.75in H
Part No. 68F1-10320 -
1U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 1U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 1U Enclosure within a Standard Rack
- Compatible Enclosures- 1U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19010 -
- 2 x ST fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125µm multimode fiber
- Zip twin 2.8 x 5.6mm
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.5db (max)
- Includes insertion loss test report
- Color: Orange
- 10 year warranty
Part No. 46040 -
- 2 x ST fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m multimode fiber
- Zip twin 2.8mm
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.5db (max)
- Includes insertion loss test report
- Color: Grey
- 10 year warranty
NOTE: Picture is for illustration purposes onlyPart No. 46060 -
- MTRJ fiber Optic to SC (Duplex) fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125µm type fiber
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss, and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.7db (max)
- Includes insertion loss test report
- Color: Orange
- 10 year warranty
Part No. 46160 -
- MTRJ fiber Optic to MTRJ fiber Optic
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m type fiber
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.7db (max)
- Includes insertion loss test report
- Color: Orange
- 10 year warranty
Part No. 46145 -
- MTRJ fiber Optic to ST (Duplex) fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 62.5/125?m type fiber
- Zip twin halogen free cable
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46205 -
- 2 x LC fiber Optic Male to 2 x LC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125?m type fiber
- Zip twin halogen free cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- 10 year warranty
Part No. 46220 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31001 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31001 -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 17 meter (55.8 ft) -
- 2 x SC fiber Optic Male to 2 x SC fiber Optic Male
- Compatible with all standard fiber optic equipment and connectors
- Full duplex 50/125?m multimode fiber
- Zip twin 2.8mm
- Low Smoke Zero Halogen cable
- Ceramic connectors ensure low signal loss and high reliability
- Total immunity to electrical and electromagnetic interference (EMI)
- Insertion loss: 0.5db (max)
- Includes insertion loss test report
- Color: Orange
- 10 year warranty
Part No. 46085 -
This Aqua Blue jacketed 15 meter (~49 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. (Not for Home Theater)Part No. LCLC-31015-PL -
This Aqua Blue jacketed 15 meter (~49 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-31015 -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 150 meter (492 ft)
-
This 15 meter (49.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31015 -
This 15 meter (~49 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11115 -
This 15 meter (~49 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01215 -
This 15 meter (~49 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-01215 -
This 15 meter (~49 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11115 -
This 15 meter (~49 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11015 -
This 15 meter (49.2 foot) high-quality Plenum approved fiber optic cable is 100 gigabit rated MTP / MTP (MPO). It features 24 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 24 strand MTP cable as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-22015 -
This 15 meter (49.2 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32015 -
This 15 meter (49.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31015 -
This 15 Meter 10 Gigabit Aqua OM4 Fiber Optic cable has multimode LC/LC connectors on both ends. Fiber cables have become popular in recent years for a number of reasons, which include their resistance to RF (radio frequency) interference, and their ability to transmit data at longer lengths without the risk of data loss.Part No. LCLC-41015 -
10 Gigabit Aqua Fiber Optic Cable, LC / LC, Multimode, Duplex, 50/125, 12 meter (39.3 foot)Part No. LCLC-31012 -
12 Fiber SC/PC Distribution Pigtail, Multimode 50um OM3, Color Coded 900um Breakout, 3 meters -
12-Strand LC/PC Distribution Pigtail, Multimode 50um OM3, Color Coded 900um Breakout, 3 meters -
12-Fiber Ribbon/Buffer Tube Fan-Out Kit, Color Coded 36 inch Tubing Length Accepts 250um -
Splice Tray, 12 Position, Fusion Splice, 6.5 inches Long x 4.68 inches Wide x 0.41 High -
LC/UPC OS2 Duplex 2.0mm Fiber Optic Patch Cord, LSZH, Singlemode 9/125, Yellow Jacket, Blue Connector, 12 meter (39.4 ft)
-
12 Strand Fiber Ribbon Pigtail, 9/125 Singlemode(Green Boot), SC/APC, 3 meters -
12 Strand Fiber Ribbon Pigtail, 9/125 Singlemode(Blue Boot), SC/UPC, 3 meters -
12 Strand Fiber Pigtail, 9/125 Singlemode(Green Boot), SC/APC, 3 meter -
12 Strand Fiber Pigtail, 9/125 Singlemode(Green Boot), LC/APC, 3 meter -
12 Strand Fiber Pigtail, 9/125 Singlemode(Blue Boot), ST/UPC, 3 meter -
12 Strand Fiber Pigtail, 9/125 Singlemode(Blue Boot), SC/UPC, 3 meter -
12 Strand Fiber Pigtail, 50/125 Multmode(Aqua Boot), OM3, SC/PC connectors, 3 meter -
12 Strand Fiber Pigtail, 50/125 Multmode(Aqua Boot), OM3, LC/PC connectors, 3 meter -
12 Strand Fiber Pigtail, OM2 - 50/125, Multmode Black Boot ST/PC connectors, 3 meter -
12 Strand Fiber Pigtail, OM2 - 50/125, Multmode Black Boot SC/PC connectors, 3 meter -
12 Strand Fiber Pigtail, OM2 - 50/125, Multmode Black Boot LC/PC connectors, 3 meter -
12 Strand Fiber Pigtail, OM1 - 62.5/125, Multmode Beige Boot ST/PC connectors, 3 meter
