Part No. 11F3-412NH
-
1000ft Black Plenum 12-Fiber Outdoor Fiber Cable,50/125, OM4 -
1000ft 12-Fiber OM4 Fiber Optic Cable 10-Gbit, OutdoorPart No. 10F3-412NH -
1000ft Aqua 12-Fiber OM4 Fiber Optic Cable 10-GbitPart No. 10F2-412NH -
This is a orange bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-212NH -
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-212NH -
This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-312NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated Plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-312NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-312NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-212NH -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-312NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-212NH -
1000ft Black Plenum 6-Fiber Outdoor Fiber Cable, 50/125, OM4Part No. 11F3-406NH -
This is a 6-fiber orange 500 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in an orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The armor eliminates the need for a separate conduit. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. * This is not gopher cable.Part No. 13F2-206NF -
12 Fiber Indoor/Outdoor Fiber Optic Cable, Singlemode 9/125, OS2, Plenum Rated, Yellow, Spool, 1000ft -
This is a orange bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-206NH -
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-206NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated Plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-306NH -
This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-306NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-206NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-306NH -
6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125, OM3, 10 Gbit, Aqua, Riser Rated, Spool, 1000 foot -
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-012NH -
This is a yellow bulk 1000 foot spool of plenum fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-012NH -
This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-012NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-206NH -
6 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 62.5/125, Black, Riser Rated, Spool, 1000 foot -
6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 62.5/125, Orange, Riser Rated, Spool, 1000 foot -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-012NH -
6 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, GR-409-CORE, Plenum Rated, Black, Spool, 1000ft -
This 30 meter (100 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32030 -
Jonard Tools Fiber Optic Power meter. -50 to +26 dBm, with FC/SC/LC Adapters - FPM-50A -
Plenum 12 Strand Indoor/Outdoor Fiber Optic Cable, OS2 9/125 Singlemode, G652.D, Black, Spool, 1000 foot
-
1000ft Aqua Plenum 2-Fiber Distribution Cable, 50/125, OM4Part No. 11F2-402NH -
100TX to 100FX-SC MM Converter w/PS (power source). Use this 100TX to 100FX SC Converters with PoE Injectors to allow users to connect to different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments. The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. ?The converter includes PD signature sensing and power monitoring features. ?Other advantages include over-current protection, under-current detection and fault protection input. ?The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. ?The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.Part No. 71F1-301SC -
Plenum Fiber Optic Cable, MTP / MTP (MPO), Multimode OM4, Duplex, 12 Strand, 40/100 Gbps, 50/125,30 meter (98.4 foot) -
Plenum MTP Fiber Optic Cable, Type A, 12 Strand, 50/125 OM4, 40/100 Gbps, MTP Female, 15 meter (49.2 foot) -
This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F3-006NH -
This is a yellow bulk 1000 foot spool of plenum fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-006NH -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-302NH -
4U Fiber Optic Patch Panel, Capacity 12 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 4U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 12 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- 19 or 23 inch rack mountable (23 inch mounting brackets sold separately)
- Accepts 12 LGX style adapter plates, modules or cassettes
- Vertically mounted panels with cable retaining rings on the front entry
- Hinged front and rear removable doors
- Dimensions: 17in W x 14in D x 7.125in H
- Powder coated 0.60 inch Aluminum
Part No. 68F1-41220 -
This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.Part No. 11F2-302NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-302NH -
2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 50/125, OM3, 10 Gbit, Black, Riser Rated, Spool, 1000 foot
-
This 50 meter (165 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31050 -
2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 6 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20610 -
6 Strand Indoor/Outdoor Fiber Optic Cable, OS2 9/125 Singlemode, Black, Riser Rated, Spool, 1000 foot
-
Bulk Zipcord Fiber Optic Cable, Multimode, Duplex, 50/125, OM3, Aqua, Riser Rated, Spool, 1000 foot -
This 15 meter (49.2 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32015
