Part No. 30D1-58992
-
The TEST-i unit tests and analyzes 18 different personal computer cables. It identifies open wires, shorts, crosses and complete miss-wires as well as showing pin to pin continuity. The device itself has an easy to read LCD display with backlight, an internal storage bank capable of holding up to 100 results and USB connectivity to transfer results to a computer for further analysis and storage. Supported connectors: IDC40, IDC34, DVI29, HDB15M/F, DB9M/F, COAX, BNC, RJ-11, RJ-45, 1394-6P, 1394-4P, SATA, USB(A/B), HDMI, RCA ***Required for power: 9V Battery (not included with tester). -
This is a pair of USB A ports on a bracket that you can connect to your motherboard to add additional USB ports.Part No. 31U1-02408 -
Gaming RGB LED light up USB Keyboard and Mouse Combo -
RGB Mouse Pad, USB, 32in X 16in -
For SAS and SATA 3.5″ hard drives. With support for SAS Dual Channel- For 3.5″ SAS or SATA II/1.0a hard drives of all capacities
- SAS Dual Data Channel support
- Externally by means of 2 individual SATA 7 pole sockets on the rear
- Internal: SAS Backplane connection SFF-8482 x2, two-channel, SATA-compatible
- Connectible, fitted in standard 5.25″ slot, with sufficient room for ventilation and heat dissipation
Part No. 21970 -
- 26 Way IDC Female to 25 Way D Male
- Internal to External Adaptor Cable (including PC Back Plate)
Part No. 33072 -
-
- Connectors: 2 shielded SATA Female connectors to 2 x internal SATA Male connector
-
- Length: 25cm
Please Note: The connectors used on this backplate are standard SATA connectors which have been specially shielded for use with older external SATA drive housings. They are not eSATA connectors.Part No. 33121 -
-
- 5¼" Power Male to 2 x 5¼" Power Female
- Internal Power Cable
- 10 Year warranty
-
- 10 Way IDC Female to 9 Way D Male 1:1 Wiring
- Cable length: 26cm
-
- 10 Way IDC Female to 9 Way D Male x Wiring
Part No. 33136 -
- Allows the motherboard connector on ATX power supplies to be extended
- Connectors: 20 Way Male to 20 Way Female Housing
- Length: approx 30cm
- 10 year warranty
Part No. 33143 -
- 80 Way Ribbon Cable
- 3 x 40 Way IDC Female Connector
- Backwards Compatible with ATA/33/66/100
- Color: Grey
Part No. 33156 -
-
- Protects your keyboard from dust build up when not in use
-
- Fits Keyboard Dimensions: 51 x 23 x 6cm
- Please Note: Covering electrical equipment (i.e. computers, printers and monitors) when switched on, can cause overheating!
Part No. 40057 -
-
- Mouse holder for receiving the computer mouse
- Including a piece of double-sided tape on the mouse holder - e.g. to attach to the monitor, desk or wall
Part No. 40164 -
- Helps keep your desk tidy and your computer mouse out of harms way when not in use
- Comes complete with large self-stick pad for permanent fixing to any adjacent surface (e.g. CPU, monitor, wall, etc.)
Part No. 40171 -
This affordable mobile CPU stand is ideal for users who regularly need to move their PC's. It features 5 anti-skid castors for ease of movement. Perfect for when you need to clean behind your computer or gain access to the rear ports.- For use with computers up to 25.5cm wide
- Maximum load: 30kg
- Heavy duty plastic construction
- Complete with 5 castors
- Color: Beige (black version also available)
Part No. 40285 -
- For use with computers up to 25.5cm wide
- Maximum load: 30kg
- Heavy duty plastic construction
- Complete with 5 castors
- Color: Black
-
-
- CD and DVD scratch remover
-
- Tube contents: 5g (sufficient for 10-12 applications)
-
- Use with a soft, clean cotton cloth
-
- For use on CDs and DVDs only
-
- Safety Data Sheets are available upon request
Part No. 40432 -
-
- Effective cleaning for your TFT, TV, Plasma and monitor screens
- Can also be used for cleaning CDs and DVDs
- Water-based cleaning gel for drip-free application
- Micro-fiber sponge gently removes dirt, dust, grease and finger marks
- Does not contain IPA (isopropyl alcohol) or other harmful additives
- Cleaning fluid contents: 30ml (enough for approximately 150 applications)
- Dimensions (approx.): 75 x 27 x 115mm (WxDxH)
- Weight (approx.): 93g (without packaging)
Part No. 40436 -
- Designed for notebooks with 15? to 17? size screens
- Height adjustable stand for lifting notebook display to create a more comfortable typing angle
- Allows a free flow of air underneath the notebook for effective passive cooling and heat dissipation
- 360? rotating base allows the notebook to be swivelled around to share with others - perfect for meetings, training and demonstrations
- Very compact and light portable design
- Distance between front and rear stand: 220mm (Min) - 260mm (Max)
- Dimensions: 328 x 298mm (WxD)
A Rotating Notebook Stand suitable for notebooks with sreens from 12? to 14? in size is available here.Part No. 40505 -
- Suitable for SATA & IDE 3.5″ HDDs
- Antistatic protection
- Foam padding to provide protection from vibration/shock
- Stackable
- Includes stickers for labelling
- Dimensions: 115 x 158 x 35mm
Part No. 40682 -
- Supports a maximum weight of 10kg
- For use with a 450mm pole and 700mm pole (not included)
- Conforms to VESA mounting standards (75 x 75mm and 100 x 100mm)
- Pole not included
This Adjustable LCD Arm is part of our unique, Modular Desktop Mounting System. With this system you can easily create customized solutions for mounting your laptops and displays in a variety of different configurations.
Please note: The above picture is shown for illustration purposes only. The pole is not included and must be purchased separately. Two versions are available, a 450mm Desk Clamp Pole and a 700mm Desk Clamp Pole.
" -
- Supports LCD monitors weighing up to a maximum of 15kg
- Left, right, tilt and rotary adjustment
- Conforms to the VESA mounting standards of 75 x 75mm and 100 x 100mm
Please note: Please check your TV is under the maximum supported weight before orderingPart No. 40721 -
- Universal fit, supports most plasma and LCD displays weighing up to 50kg
- Compatible with displays with mounting screw hole distances of up to 800mm high and 450mm wide
- Securely fit and easily remove screens for maintenance
- Heavy gauge steel construction with powder coated silver finish
- Adjustable height: from 112cm to 180cm from the ground (measured to the center of the display bracket)
- Adjustable design allows the screen to be tilted up to 15°
- Includes four omni-directional, locking wheels for portability
- Includes a sturdy shelf that can be fixed at either a higher or lower level
- An additional Plasma Trolley Shelf is available if required
- Assembly required
Please note: Please check your TV is under the maximum supported weight before orderingPart No. 40736 -
-
- Supports a maximum weight of 20kg
-
- Left, right, tilt and rotary 360° adjustment
-
- Arm extends to 148mm
-
- Torque control for each adjustment setting to control or prevent movement
-
- Supplied with wall fixing bolts, display mounting screws and spanner
-
- Conforms to the VESA mounting standards of 75 x 75mm and 100 x 100mm
-
- Colour: silver
Please note:- Please check your TV is under the maximum supported weight before ordering
Part No. 40766 -
-
This internal 2.5″ SATA hard drive module easily installs into a standard 3.5″ drive bay making it an ideal way to expand your hard disk storage. A neat push button system allows quick removal of the drives. It can be installed into any suitable PC case and is ideal for servers or workstations, allowing instant hot-swap access to the hard drives.The SATA hard drive module features a unique connection mechanism which allows the drives to be mounted directly into the housing without the need for a separate caddy. A special 'no-scratch' connector protects the drive contacts and is tested to exceed over 10,000 insertions and ejections.- Allows two 2.5″ SATA hard drives to be installed into a standard 3.5″ drive bay
- Connects to your PC's internal SATA controller
- Features 'caddy-less' drive ejection system
- Supports 'Hot Swap' function
- High quality aluminium housing for efficient cooling
- LED indicators for power and hard disk drive access
- Supplied with 2 SATA data cables
- External connectors:
- 2 x SATA (data)
- 1 x 5¼" Power (adapters available for SATA power connectors)
- Dimensions: 100 x 123 x 25mm (WxDxH)
- Mounting screws included
- Suitable for use with most 2.5″ SATA hard disks up to 9.5mm in height
Please note: hard drives are not included.A wide range LINDY SATA cables and power adapters are also availablePart No. 42971 -
Adds 4 x USB 3.0 ports to your PC using the PCIe slot.- Connections: 4 x Type A socket, external
- PCIe Gen2 x1 card
- Each port is separately protected against short circuits and excessive current consumption with a semiconductor fuse
- Renesas / NEC chipset uPD720201
- Bus: PCIe
- Supports USB 3.0, USB 2,0 and USB 1.1
- Supports USB 3.0 specifications
- Data transfer: SuperSpeed (5Gbps), HighSpeed (480Mbps), FullSpeed (12Mbps) and LowSpeed (1.5 Mbps)
- Compatible with PCI Express specification 2.0
- 15-pin SATA- or 4pin Molex current connection (5V from ATX power supply)
- Suitable for standard slot and low profile. Low Profile slotted panel included in delivery.
- Operating systems (32bit/64bit): Win XP/Vista/7 / 64bit 2008 R2 / 8
Part No. 51051 -
- Upgrade your computer or add additional high speed ports with this 32 Bit PCI Card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 480Mbit/sec
-
- Chipset: Via VT 6212
-
- Easy "Plug & Play" installation
-
- Silicon fuses provide protection for each port
-
- EHCI based 480Mbit/sec USB 2.0 Hi-Speed compliant
-
- OHCI based 12Mbit/sec USB 1.1 compliant
-
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
-
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista
Part No. 51060 -
-
- Bus Type: 32 Bit PCI
- Speed: Up to 480Mbps
- Chipset: Via VT 6212L
- Silicon fuses provide protection for each port
- USB 2.0 and USB 1.1 compliant
- Connectors: 4 x Type A USB Female (External) + 1 x Type A USB Female (Internal shared)
- Software Compatibility: Windows ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51063 -
- PCI CardBus adapter card
Slot: 1 x CardbusSupports hot swappingPlug & PlayChipset: RICOHAccess 32-bit CardBus cards (3.3 V and 5V)Automatic detection of 32-bit CardBus cardsPCI Local Bus Specification 2.2PC Card Standard Release 8.0Operating Systems: Win98/ME/2000/XP/VistaHardware requirements: free PCI slotPart No. 51105 -
- Bus Type: PCI Express (x1)
- Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
- Compliant with USB 3.0 Rev. 1.0 specification
- Compliant with PCIe 2.0 Specification
- Each USB port supplies +5VDC/900mA
- Supports USB 3.0, USB 2.0, and USB 1.1 devices
- Connectors: USB 3.0 Type A Female (3 x External, 1 x Internal) & 15 Way SATA Power
- Chipset: TI
- All ports are silicon fused
- Software Compatibility: Windows 7 (32/64bit), Vista, XP, Linux 2.6.32
- Includes standard and low profile brackets
- 2 Year warranty
Part No. 51121 -
- Bus Type: 32 Bit PCI
- Speed: Serial ATA-150
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Internal Connector: 2 x SATA Female
- Supports 2 independent Serial ATA channels
- Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
- Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
- Integrated PCI DMA engines
- RAID Function Level 0 and 1 (Mirror and Stripe Set)
- Standard and Low Profile PC Back Plates included
- Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
Part No. 51150 -
- Bus Type: PCIe (2.5Gbit/sec)
- Speed: SATA II (3Gbit/sec)
- Internal Connector: 1 x SATA Female
- External Connector: 1 x eSATA Female
- Port Multiplier and Native Command Queuing support
- Supports RAID levels 0, 1, 0+1, 5 and JBOD
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
Part No. 51171 -
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: PCIe (2.5Gbit/sec)
- Speed: ATA-133
- Internal Connector: 40 Way EIDE Male
- 40 Way IDE Ribbon Cable included (supports two drives)
- Standard and Low Profile PC Back Plates included
- Supports RAID levels 0, 1 and JBOD
- Pin header for drive LED connection
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008
- 2 Year warranty
Part No. 51177 -
- Supports Type: 32/64 Bit Systems
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP
- Card Connector: 25 Way D Female
- Software Compatability: 2000/XP/Server 2003/Vista (32/64 Bit)/7 (32/64 Bit), Linux
Part No. 51185 -
- Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- Supports PCI Express Specification Revision 1.1
Serial Port:- Speed: Up to 921Kbps
- Card Connector: 2 x 9 Way D Male
Parallel Port:- Speed: Up to 15Mbps
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port) or SPP (Standard Parallel Port)
Part No. 51188 -
- Speed: Up to 921Kbit/sec
- Card Connector: 4 x 9 Way D Male (via breakout cable)
- Supports PCI Express Specification Revision 1.1
- Built-in 128K byte DMA software FIFO
- Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- 2 Year Warranty
Part No. 51189 -
- 2 x RS422/485 Ports
- Bus Type: 32 Bit PCI Compliant
- Compliant with PCI revision 2.2 (3.3V & 5V)
- Speed: Up to 921Kbit/sec
- 256Kbyte FIFO buffer
- Plug & Play
- Automatic I/O and IRQ set-up
- ESD protection 15KV support
- Card Connector: 1 x DB25 Male to 2 x DB9 Male (via an adapter cable)
- Software Compatibility: Windows 2000/NT/XP/Vista/Windows 7/Server 2003, 2008, Linux, SCO Unix
- Supplied with standard and low profile back plates
- 2 Year warranty
Part No. 51215 -
- Bus Type: 32 Bit PCI
- Speed: 10/100/1000Mbps
- Standard: IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow control support) & 802.1q (Virtual LAN)
- BootROM Socket
- Plug & Play
- Card Connector: RJ-45 UTP (10/100/1000Base-T)
- Chipset: Realtek
- LED indicators: Link/Activity
- Gigabit connection over CAT5e or higher STP/UTP cable
- Software Compatibility: Windows 98SE/ME/NT/2000/XP/Server 2003/Vista/7, Netware 5.x, Netware ODI for DOS, Linux, Unix, Mac OS 10.2 & higher
Part No. 51220 -
- Low profile PCIe
- Speed: Up to 1.5Mbps
- Built-in 32 byte hardware FIFO
- SPP/EPP/ECP compatible
- IEEE 1284 standard
- Supports PCIe Base Specification Rev 1.1
- Supports x1, x2, x8, x16 (lane) PCIe Bus connector keys
- Card Connector: 25 Way D Female
- Software Compatibility: Windows 2000/ME/XP/Vista/Windows 7/Server 2003, 2008, Linux Kernel 2.6.x
- Chipset: Oxford OXPCIe840
- 2 Year warranty
Part No. 51246 -
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: 32 Bit PCI
- Speed: Up to 921Kbit/sec
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 44 Way D Female
- Adapter Cable: 44 Way D Male to 2 x 9 Way D Male
- Software Compatability: DOS, Windows 3.1x/95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51261 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Voltage: 3.3V (No 5V support)
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Vista, Linux
Part No. 51265 -
- Bus Type: 32 Bit PCI
- Speed: Up to 920Kbit/sec
- I/O Address: "Plug & Play"
- Supports 3.3V and 5V motherboards
- DC 5V output for DB9 selected by jumper
- Standard and Low Profile back plates included
- IRQ Selection: "Plug & Play"
- External Connector: 1 x 44 Way D Female
- Adapter Cable: 44 Way D Male to 4 x 9 Way D Male
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista/Windows 7/8/Server 2003, 2008
- Chipset: Oxford semiconductor
- 2 Year Warranty
Part No. 51274 -
- Bus Type: 32 Bit PCI
- Speed: Up to 921Kbit/sec
- FIFO: 128 byte
- I/O Address: Com 1-8
- Card Connector: 62 Way D Female
- Adapter cable: 1 x 62 Way male to 8 x 9Pin D Male (Octopus cable)
- 3.3V and 5V support
- Chipset: Oxford OXuPCI958
- Software Compatibility: Windows 98/NT/2000/XP/Vista/Windows 7, DOS, Linux
- 3 Year warranty
Part No. 51275 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
Serial Port:-
- Speed: Up to 921Kbit/sec
-
- I/O Address: COM 1-8
-
- IRQ Selection: 3, 4, 5, 7, 9
-
- Card Connector: 2 x 9 Way D Male
Parallel Port:-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: 3, 4, 5, 7, 9
-
- Separate Back Plate: 25 Way D Female
-
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
Part No. 51280 -
-
<ul ">This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.- Bus Type: 32 Bit PCI
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista, Linux
- 3 Year Warranty
- Speed: Up to 921Kbps
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 9 Way D Male
- Separate Back Plate: 9 Way D Male
- Speed: Up to 2.7MBps
- I/O Address: "Plug & Play"
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
Part No. 51281 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: "Plug & Play"
-
- Card Connector: 25 Way D Female
-
- Parallel port can be configured as SPP, BPP, ECP or EPP
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51285 -
-
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
- Bus Type: 32 Bit PCI
- Speed: Up to 2.7MByte/sec
- I/O Address: LPT 1-6
- IRQ Selection: "Plug & Play"
- Card Connector: 25 Way D Female
- Separate Back Plate: 25 Way D Female
- Parallel port can be configured as ECP (Enhanced Capabilities Port) or EPP (Enhanced Parallel Port)
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
- 3 Year Warranty
Part No. 51286
